GB/T 12137-2015_English: PDF (GB/T12137-2015)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 12137-2015 | English | 85 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Methods for leakage test of gas cylinders
| Valid |
GB/T 12137-2015
|
GB/T 12137-2002 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Method for leakage test of gas cylinders
| Obsolete |
GB/T 12137-2002
|
GB/T 12137-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Method for pneumatic testing of cylinders
| Obsolete |
GB/T 12137-1989
|
Standard ID | GB/T 12137-2015 (GB/T12137-2015) | Description (Translated English) | Methods for leakage test of gas cylinders | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J74 | Classification of International Standard | 23.020.30 | Word Count Estimation | 6,698 | Date of Issue | 2015-12-10 | Date of Implementation | 2016-07-01 | Older Standard (superseded by this standard) | GB/T 12137-2002 | Quoted Standard | GB/T 13005; GB/T 16163; TSG R0004; TSG R0006 | Drafting Organization | Shanghai Institute of Special Equipment Inspection; Ningbo Mingxin Chemical Machinery Co., Ltd; Shanghai anchor pressure vessel (Group) Co., Ltd. | Administrative Organization | National Gas Cylinder Standardization Technical Committee | Regulation (derived from) | National Standard Announcement 2015 No.38 | Proposing organization | National Gas Cylinder Standardization Technical Committee (SAC/TC 31) | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China | Summary | This standard specifies the requirements, test equipment and test methods cylinders tightness tests. This standard applies when using the immersion method or the method of coating liquid gas cylinders tightness test. | Standard ID | GB/T 12137-2002 (GB/T12137-2002) | Description (Translated English) | Method for leakage test of gas cylinders | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J74 | Classification of International Standard | 23.020.30 | Word Count Estimation | 5,554 | Date of Issue | 2002/4/26 | Date of Implementation | 2002/11/1 | Older Standard (superseded by this standard) | GB 12137-1989 | Drafting Organization | Ningbo Mingxin Chemical Machinery Co., Ltd. | Administrative Organization | National Standardization Technical Committee cylinders | Proposing organization | National Cylinder Standardization Technical Committee | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China | Summary | This Standard specifies the test apparatus and test method for tightness testing of cylinders for cylinders of air tightness test. | Standard ID | GB/T 12137-1989 (GB/T12137-1989) | Description (Translated English) | Method for pneumatic testing of cylinders | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | C65 | Word Count Estimation | 4,459 | Date of Issue | 1989/12/29 | Date of Implementation | 1990/10/1 |
GB/T 12137-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 23.020.30
J 74
Replacing GB/T 12137-2002
Methods for Leakage Test of Gas Cylinders
ISSUED ON. DECEMBER 10, 2015
IMPLEMENTED ON. JULY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Application Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 Test Apparatus ... 5
5 Requirements for Tested Gas Cylinders ... 6
6 Test Methods and Evaluation Criteria ... 7
7 Requirements for Test Records ... 8
Bibliography ... 9
Methods of Leakage Test of Gas Cylinders
1 Application Scope
This Standard specifies the requirements for test apparatus and test methods for
leakage test of gas cylinders.
This Standard applies to leakage test of gas cylinders when water-immersion method
or soap bubble method is used.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 13005, Terminology of Gas Cylinders
GB/T 16163, Classification of Gases Filled in Cylinder
TSG R0004, Supervision Regulation on Safety Technology for Stationary
Pressure Vessel
TSG R0006, Gas Cylinders Safety and Technical Supervision Regulation
3 Terms and Definitions
For the purposes of this document, the following terms and definitions and those
defined in GB/T 13005 apply.
3.1 Water-immersion test
The test method in which tested gas cylinders filled with a gas of specified pressure
are immersed in a water tank to check their air-tightness.
NOTE Water-immersion test applies to leakage test of the whole or local part of tested gas
cylinders.
3.2 Soap bubble test
The test method in which an inspection liquid is applied on the part to be tested of
tested gas cylinders filled with a gas of specified pressure to check their air-tightness.
NOTE Soap bubble test applies to the leakage test of threaded connections of tested gas
cylinders and cylinder valves, cylinder valve rods, cylinder valve air outlets, fusible plugs or gas
6 Test Methods and Evaluation Criteria
6.1 Options of test media and methods
6.1.1 The leakage test media of the manufacturer of gas cylinders shall be as
specified in 4.1.2; priority shall be given to water-immersion method for leakage test.
6.1.2 The leakage test media and methods for the periodic inspection agency of gas
cylinders are as follows.
a) for gas cylinders containing non-combustible, non-toxic, non-corrosive gases as
classified in GB/T 16163, directly choose gas cylinders to contain gases and use
water-immersion method or soap bubble method to carry out leakage test;
b) for gas cylinders containing other gases, choose test media as specified in 4.1.2
and use water-immersion method to carry out leakage test.
6.2 Test conditions
6.2.1 The environmental temperature for the leakage test of gas cylinders shall be
greater than 0°C.
6.2.2 In accordance with the test requirements of different gas cylinders, fill tested
gas cylinders to the pressure for leakage test at a constant, gentle speed.
6.3 Test requirements
6.3.1 Water-immersion method
The requirements for water-immersion test are as follows.
a) place tested gas cylinders filled with gases of test pressure into test water tank
to make any part of tested gas cylinders not less than 5 cm from water level;
b) the immersion time of tested gas cylinders is not less than 1 min. After tested gas
cylinders become stable, carry out visual inspection to determine whether any
bubble appears in any part.
6.3.2 Soap bubble method
Apply inspection liquid on the part to be inspected on tested cylinders filled with gases
of test pressure; the dwell time of applied liquid shall not be less than 1 min. Carry out
visual inspection to determine whether any bubble occurs.
6.4 Evaluation criteria
Under any of the following circumstances, the leakage test of tested gas cylinders is
decided to be a fail.
......
|