|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12010.4-2010: Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 4: Determination for pH value
Status: Valid GB/T 12010.4: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 12010.4-2010 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 4: Determination for pH value
| Valid |
GB/T 12010.4-2010
|
| GB/T 12010.4-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Determination for volatile matter of polyvinyl alcohol resins
| Obsolete |
GB/T 12010.4-1989
|
PDF similar to GB/T 12010.4-2010
Basic data | Standard ID | GB/T 12010.4-2010 (GB/T12010.4-2010) | | Description (Translated English) | Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 4: Determination for pH value | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G31 | | Classification of International Standard | 83.080 | | Word Count Estimation | 5,518 | | Date of Issue | 2010-09-02 | | Date of Implementation | 2011-05-01 | | Older Standard (superseded by this standard) | GB/T 12010.8-1989 | | Quoted Standard | GB/T 603; GB/T 6682; GB/T 9724; JJG 119-2005 | | Adopted Standard | JIS K6726-1994 (2003), NEQ | | Regulation (derived from) | National Standard Approval Announcement 2010 No.4 (Total No.159) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the method was measured by the pH of the aqueous solution of polyvinyl alcohol materials with acidity. This section applies to the determination of the pH value of greater than 70% alcohol solution (molar fraction) of 4% aqueous solution of polyvinyl alcohol material. | GB/T 12010.4-2010: Plastics -- Poly (vinyl alcohol) (PVAL) materials -- Part 4: Determination for pH value
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics Poly (vinyl alcohol) (PVAL) materials Part 4. Determination for pH value
ICS 83.080
G31
National Standards of People's Republic of China
Replacing GB/T 12010.8-1989
Plastic material polyvinyl alcohol (PVAL)
Part 4. pH value measurement
Plastic-Poly (vinylalcohol) (PVAL) materials-
Part 4. DeterminationforpHvalue
Issued on. 2010-09-02
2011-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 12010 "plastic material polyvinyl alcohol (PVAL)" is divided into eight sections.
--- Part 1. Designation system and basis;
--- Part 2. Performance measurement;
--- Part 3. Specifications;
Part --- Chapter 4. pH value measurement;
--- Part 5. Determination of the average degree of polymerization;
--- Part 6. Determination of particle size;
--- Part 7. Determination of sodium hydroxide;
--- Part 8. Determination of transparency.
This section GB/T Part of 412,010, and JISK6726.1994 (2003 Confirmafion) "Standard Test Method for polyvinyl alcohol" (May
Text version) of the non-equivalent.
This Part replaces GB/T 12010.8-1989 "polyvinyl alcohol resin pH value measurement method."
This section compared with the GB/T 12010.8-1989 The main changes are as follows.
--- Increasing the reference document (Chapter 2 of this edition);
--- Improve the accuracy of the pH meter (1989 version 5.1, this version 5.1);
--- Improve the accuracy of the balance (1989 version 5.7, this version 5.2);
--- Canceled heated to reflux for sample dissolution (1989 version 6.1, this version 6.1);
--- Sample weight by the sample was adjusted to 12g 15g (1989 version 6.1, this version 6.1).
This part is proposed by the China Petroleum and Chemical Industry Association.
This part of the National Standardization Technical Committee of plastic products and plastic resins General Methods Chapter (SAC/TC15/SC4) centralized.
This section is responsible for drafting unit. Hunan Xiangwei Limited.
This section participated in the drafting unit. China Petrochemical Group of Sichuan Vinylon Works, Ltd. Yunnan Yun-dimensional, synthetic resin national quality supervision
Governor Inspection Center.
The main drafters of this section. Shu Xiaoyan, Tang Songqiao, small Yang Lu, Zhu Zeli, Yan Hong, Pu Li Jun, Wang Jiandong, WANG Yan.
This part replaces the previous version of the published case.
--- GB/T 12010.8-1989.
Plastic material polyvinyl alcohol (PVAL)
Part 4. pH value measurement
1 Scope
GB/T 12010 provisions of this section was measured by the method of pH of aqueous solutions of polyvinyl alcohol material with acidity.
This section applies to the determination of pH values \u200b\u200bgreater than 70% alcohol solution (mole fraction) of 4% aqueous solution of polyvinyl alcohol material.
2 Normative references
The following documents contain provisions which, through reference GB/T 12010 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 603 chemical reagent in test methods - Preparations with
Laboratory use specifications and test methods GB/T 6682 Analysis
GB/T 9724 General rule for determination of pH chemical reagent
JJG119-2005 Laboratory pH (acidity) meter
Principle 3
Indicator electrode and a reference electrode immersed in the same test solution constituting a primary battery, pH value of the electromotive force and its solution will have specified
Off can be derived by measuring the pH of the solution of the original electromotive force.
4 Reagents
When this part of the reagents and water, unless otherwise specified, refer to analytically pure reagents and GB/T 6682 in the third grade water.
Phthalate 4.1 standard buffer solution, according to GB/T 9724 preparation.
Standard 4.2 phosphate buffer solution, according to GB/T 9724 preparation.
Standard 4.3 borate buffer solution, according to GB/T 9724 preparation.
4.4 carbon dioxide-free water, according to GB/T 603 formulation.
5 Instruments
5.1 pH meter. shall comply JJG119-2005 of 4.7 "0.02" requirements.
5.2 Balance. accurate to 0.001g.
5.3 Erlenmeyer flask. 500mL.
5.4 Beaker. 100mL.
5.5 dissolution device. can be heated and stirred.
5.6 Thermometer. Accurate to 1 ℃.
6 steps
Preparation 6.1 4% aqueous solution of polyvinyl alcohol
6.1.1 Weigh a sample of about 15g, accurate to 0.001g, placed in 500mL Erlenmeyer flask.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12010.4-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 12010.4-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 12010.4-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12010.4-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 12010.4-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12010.4-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|