Powered by Google www.ChineseStandard.net Database: 189759 (7 Apr 2024)

GB/T 1192-2017 (GBT1192-2017)

GB/T 1192-2017_English: PDF (GBT 1192-2017, GBT1192-2017)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 1192-2017English75 Add to Cart 0--9 seconds. Auto-delivery Technical specification of agricultural tyres Valid GB/T 1192-2017

BASIC DATA
Standard ID GB/T 1192-2017 (GB/T1192-2017)
Description (Translated English) Technical specification of agricultural tyres
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G41
Classification of International Standard 83.160.30
Word Count Estimation 5,543
Date of Issue 2017-11-01
Date of Implementation 2018-09-01
Older Standard (superseded by this standard) GB/T 1192-2008
Drafting Organization Xuzhou Xulun Rubber Co., Ltd., Shandong Linglong Tire Co., Ltd., Guizhou Tire Co., Ltd., Sichuan Haida Rubber Group Co., Ltd., Beijing Rubber Industry Research and Design Institute, Zhongce Rubber Group Co., Ltd., Aeolus Tire Co., Ltd., Tianjin International United Tire and Rubber Co., Ltd.
Administrative Organization National Tire Rim Standardization Technical Committee (SAC/TC 19)
Regulation (derived from) National Standard Announcement 2017 No. 29
Proposing organization National Petrochemical Industry Federation
Issuing agency(ies) People's Republic of China General Administration of Quality Supervision, Inspection and Quarantine, China National Standardization Administration

Standards related to: GB/T 1192-2017

GB/T 1192-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.160.30
G 41
Replacing GB/T 1192-2008
Technical specification of agricultural tires
ISSUED ON: NOVEMBER 1, 2017
IMPLEMENTED ON: SEPTEMBER 1, 2018
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of PRC;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Requirements ... 5
5 Test methods ... 6
6 Marking and packaging ... 6
Technical specification of agricultural tires
1 Scope
This standard specifies the terms and definitions, requirements, test methods, marking
and packaging of agricultural tyres.
This standard applies to new pneumatic tyres (including covers and flaps) for
agricultural and forestry tractors and machinery.
2 Normative references
The following documents are essential to the application of this document. For the dated
referenced documents, only the versions with the indicated dates are applicable to this
document; for the undated referenced documents, only the latest version (including all
the amendments) is applicable to this document.
GB/T 519 Test methods for measuring physical properties of pneumatic tyres
GB/T 521 Test methods for measuring peripheral dimensions of tyres
GB/T 528 Rubber, vulcanized or thermoplastic - Determination of tensile stress-
strain properties
GB/T 531 Rubber, vulcanized or thermoplastic - Determination of indentation
hardness
GB/T 532 Rubber, vulcanized or thermoplastic - Determination of adhesion to
textile fabric
GB/T 1689 Rubber vulcanized - Determination of abrasion resistance (Akron
machine)
GB/T 2979 Size designation, dimensions, inflation pressure and load capacity for
agricultural tyres
GB/T 6326 Tyre terms and definitions
GB/T 14828 Test method for measuring traction performance of agricultural tyres
GB/T 34823 Endurance test method for agricultural tyres
HG/T 2177 Appearance quality of tyres
inner liner, breaker, bead) separation, ply cracking, cords separation, cords break,
chunking, open splice, chap, carcass abnormal deformation and other defects checked
out in the appearance inspection.
5 Test methods
5.1 The overall diameter and section width of the tyre after inflation shall be measured
according to GB/T 521.
5.2 The tensile strength and elongation at break of the tyre cover tread rubber shall be
sampled according to the provisions of GB/T 519, and tested with a type 2 cutter
according to GB/T 528.
5.3 The hardness of the tyre cover tread rubber shall be measured according to GB/T
531.
5.4 The wear volume of the tyre cover tread rubber shall be sampled according to GB/T
519 and tested according to GB/T 1689.
5.5 The adhesive strength of each component of the tyre cover shall be sampled
according to GB/T 519, and tested according to GB/T 532.
5.6 Tyres can be tested for traction performance according to GB/T 14828.
5.7 Tires can be tested for wear performance according to HG/T 2444.
5.8 Agricultural radial tyres shall be tested for endurance according to GB/T 34823.
6 Marking and packaging
6.1 Marking
6.1.1 There shall be marks of items a) ~ h) on the sidewall of each tyre cover; if it is a
tubeless tyre, it shall also have the mark of item i); each flap shall have the marks of
item a), b), and g):
a) size designation;
b) trademark, manufacturer's name, or place of origin;
c) speed symbol or maximum speed, inflation pressure, ply rating, or load index
or load capacity;
d) tyre driving direction mark (the tread pattern of the tyre cover has the driving
direction);
...