|
US$789.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11618.2-2008: Pipe fittings of copper and copper alloys -- Part 2: Fittings of press type
Status: Valid GB/T 11618.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 11618.2-2008 | English | 789 |
Add to Cart
|
6 days [Need to translate]
|
Pipe fittings of copper and copper alloys -- Part 2: Fittings of press type
| Valid |
GB/T 11618.2-2008
|
| GB/T 11618.2-1989 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Copper tube joints--Bends with an angle of 45 degrees
| Obsolete |
GB/T 11618.2-1989
|
PDF similar to GB/T 11618.2-2008
Basic data | Standard ID | GB/T 11618.2-2008 (GB/T11618.2-2008) | | Description (Translated English) | Pipe fittings of copper and copper alloys -- Part 2: Fittings of press type | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U55 | | Classification of International Standard | 47.020.30 | | Word Count Estimation | 34,382 | | Date of Issue | 2008-12-31 | | Date of Implementation | 2009-10-01 | | Quoted Standard | GB/T 191; GB/T 528; GB/T 531; GB/T 1176-1987; GB/T 1685; GB/T 1690; GB/T 1804-2000; GB/T 2040-2008; GB/T 2059-2008; GB/T 3512; GB/T 5231-2001; GB/T 5720; GB/T 5721; GB/T 7306.1-2000; GB/T 7759; GB/T 7762; GB/T 8888; GB/T 12829; GB/T 18033-2007; HG/T 3091-2000; HG/T 3092; YS/T 649-2007; " in drinking water, hygiene and safety equipment and protective materials evaluation norms, " the Ministry of Health Health Law Regulatory Commission (2001) 161 annex 2; "steel ship classification rules, " the China Classification Society 2006 Volume III | | Regulation (derived from) | National Standard Approval Announcement 2008 No.25 (Total No.138) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the size of the copper connection by GB/T 18033 cards brass compression fittings (hereinafter referred to as compression fittings) classification, requirements, test methods, inspection rules, signs, packaging, transport and storage. This section applies to the nominal pressure of not more than PN1. 6MPa, nominal diameter of not more than DN100mm for delivery of domestic water (cold water, hot water), drinking water, gas, medical gases, seawater brass compression fittings road design, manufacture and acceptance. | GB/T 11618.2-2008: Pipe fittings of copper and copper alloys -- Part 2: Fittings of press type---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pipe fittings of copper and copper alloys Part 2. Fittings of press type
ICS 47.020.30
U55
National Standards of People's Republic of China
Copper Pipe Fittings - Part 2. compression fittings
Posted 2008-12-31
2009-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 classification and marking 2
5 requires 18
6 Test methods 20
7 Inspection rules 23
8 sign 24
9 packaging, transportation and storage 24
Appendix A (normative) compression fittings with rubber O-ring 25
Annex B (informative) brass compression fittings and installation methods 28
Foreword
GB/T 11618 "brass fittings" is divided into two parts.
--- Part 1. brazed tube;
--- Part 2. compression fittings.
This section GB/T 11618 Part 2.
GB/T 2040-2008 Copper and copper alloy sheet
GB/T 2059-2008 Copper and copper alloy strip
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test (GB/T 3512-2001,
eqv ISO 188.1998)
GB/T 5231-2001 processing of copper and copper alloy chemical composition and shape of the product
GB/T 5720 O-shaped rubber seals - Test methods
GB/T 5721 rubber seal products logo, packaging, transportation and storage of general provisions
GB/T 7306.1-2000 55 ° sealing pipe thread - Part 1. the inner cylindrical thread and taper external thread (eqv ISO 7-1.1994)
GB/T 7759 vulcanized rubber, thermoplastic rubber at room temperature, high and low temperature compression set was measured (GB/T 7759-1996,
eqv ISO 815.1991)
GB/T 7762 vulcanized rubber or thermoplastic rubber resistant to ozone cracking static tensile test (GB/T 7762-2003, ISO 1431-1.
1989, MOD)
GB/T 8888 heavy non-ferrous metal processing products, packaging, labeling, transportation and storage
Determination of strength GB/T 12829 vulcanized rubber or thermoplastic rubber small sample (Sample Delft) tear (GB/T 12829-
2006, ISO 34-2.1996, IDT)
GB/T 18033-2007 seamless copper pipes and copper pipe
HG/T 3091-2000 rubber seals, drainage and sewerage pipelines - Interface ring material specification
HG/T 3092 gas supply pipes and fittings with rubber seals rubber
YS/T 649-2007 copper and copper alloy extruded rod
"In drinking water equipment and protective materials hygiene and safety evaluation norms" Ministry of Health Health Law Jian Fa (2001) No. 161 annex 2
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11618.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 11618.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 11618.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11618.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 11618.2-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11618.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|