Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169759 (Oct 25, 2020)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

GB/T 11251-2020

Chinese Standard: 'GB/T 11251-2020'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
GB/T 11251-2020English140 Add to Cart 0--10 minutes. Auto immediate delivery. Alloy structural steel plate and strip Valid GB/T 11251-2020
GB/T 11251-2020Chinese18 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]  

  In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  

BASIC DATA
Standard ID GB/T 11251-2020 (GB/T11251-2020)
Description (Translated English) Alloy structural steel plate and strip
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H46
Classification of International Standard 77.140.50
Word Count Estimation 14,161
Date of Issue 2020-03-06
Date of Implementation 2020-10-01
Older Standard (superseded by this standard) GB/T 11251-2009
Drafting Organization Jiangyin Xingcheng Special Steel Co., Ltd., Shougang Group Co., Ltd., Metallurgical Industry Information Standard Research Institute, Xiwang Metal Technology Co., Ltd.
Administrative Organization National Steel Standardization Technical Committee (SAC / TC 183)
Regulation (derived from) National Standards Bulletin No. 1 of 2020
Proposing organization China Iron and Steel Industry Association
Issuing agency(ies) State Administration of Market Supervision and Administration, National Standardization Administration

GB/T 11251-2020
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.50
H 46
Replacing GB/T 11251-2009
Alloy structural steel plate and strip
合金结构钢钢板及钢带
ISSUED ON: MARCH 06, 2020
IMPLEMENTED ON: OCTOBER 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative references ... 5 
3 Order content ... 6 
4 Size, shape, weight ... 6 
5 Technical requirements ... 7 
6 Test method ... 11 
7 Inspection rules ... 12 
8 Packaging, marking and quality certificate ... 13 
Appendix A (Normative) Size, shape, weight and allowable deviation of the steel
strip ... 14 
Alloy structural steel plate and strip
1 Scope
This Standard specifies the order content, size, shape, weight, technical
requirements, test methods, inspection rules, packaging, marking and quality
certificates of alloy structural steel plate and strip.
This Standard applies to alloy structural steel hot-rolled steel plates whose
thickness is 4 mm ~ 200 mm (hereinafter referred to as steel plates) and alloy
structural steel hot-rolled steel strips (including shear steel plates) whose
thickness is not greater than 12 mm and width is less than 600 mm (hereinafter
referred to as steel strips).
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 222, Permissible tolerances for chemical composition of steel products
GB/T 224, Determination of depth of decarburization of steels
GB/T 228.1-2010, Metallic materials - Tensile testing - Part 2010: Method of
test at room temperature
GB/T 229, Metallic materials - Charpy pendulum impact test method
GB/T 231.1, Metallic materials - Brinell hardness test - Part 1: Test method
GB/T 232, Metallic materials - Bend test
GB/T 247, General rule of package, mark and certification for steel plates
(sheets) and strips
GB/T 709-2019, Dimension shape weight and tolerances for hot-rolled steel
plates and sheets
GB/T 2970-2016, Method for ultrasonic testing of thicker steel plates
GB/T 2975, Steel and steel products - Location and preparation of samples
and test pieces for mechanical testing
4.2 The size, shape, weight and allowable deviation of the steel strip shall
comply with the provisions of Appendix A.
5 Technical requirements
5.1 Designation and chemical composition
5.1.1 The common designations and chemical composition of the steel shall
comply with the provisions of GB/T 3077.
5.1.2 The allowable deviation of chemical composition of the finished steel
product shall comply with the provisions of GB/T 222.
5.2 Delivery status
5.2.1 Delivery status of steel plate
5.2.1.1 Steel plates shall be delivered in a high-temperature tempering status.
If it is required by the buyer and indicated in the contract, delivery can also be
in the status of annealing, normalizing, normalizing + tempering.
5.2.1.2 If it is guaranteed that the steel plate can reach the mechanical
properties of 5.3.3, normalizing rolling method can also be used instead of
normalizing treatment.
5.2.1.3 According to the requirement of the buyer, If it is indicated in the contract,
the steel plate can be delivered by acid pickling.
5.2.1.4 Steel plates shall be trimmed for delivery; it shall be indicated in the
contract when they are delivered in other edge conditions. Rolled steel plates
can be free from longitudinal edge cutting.
5.2.2 Delivery status of steel strip
Steel strips are generally delivered in a hot rolled status without trimming.
According to the requirements of the buyer, steel strips of other special delivery
status can be supplied. The specific requirements are negotiated by the supplier
and the buyer and indicated in the contract.
5.3 Mechanical property
5.3.1 For steel plates that are delivered in high-temperature tempering status,
the surface Brinell hardness shall comply with the provisions of GB/T 3077.
5.3.2 For steel plates that are delivered in the annealing status, the mechanical
properties shall comply with the provisions in Table 1.
According to the requirements of the buyer, the 25CrMnSi and 30CrMnSi steel
plates can be tested for the banded structure; the result shall not be greater
than grade 3.
5.7 Ultrasonic testing
The steel plate shall be subjected to ultrasonic testing in accordance with the
provisions of GB/T 2970-2016; the results shall meet the requirements of grade
II.
5.8 Surface quality
5.8.1 There shall be no cracks, bubbles, folds, inclusions, scars, and obvious
scratches on the surface of the steel plate and steel strip; the steel plate and
steel strip shall not have visual layering. If the above surface defects are
allowed to be cleaned, the cleaning depth shall not exceed half the thickness
tolerance of the steel plate or steel strip. Defects whose depth and height does
not exceed half the thickness tolerance of the steel plate and steel strip are
allowed; the minimum thickness of the steel plate and steel strip shall be
ensured.
5.8.2 Steel plates and steel strips that are delivered by acid pickling are allowed
to have unobvious rough surface and light-yellow film that is caused by acid
pickling.
5.8.3 Steel strips are allowed to be delivered with partial surface defects; but
the length of the defective part shall not exceed 6% of the total length of each
coil of steel strip.
5.8.4 There shall be no gaps and edge cracks on the edges of untrimmed steel
strips; other edge defects whose actual depth is not greater than half the width
tolerance is allowed, and the minimum width of the steel strip shall be
guaranteed. The edges of the trimmed steel strip are allowed to have burrs
whose size is not greater than 0.50 mm.
5.9 Special requirements.
According to the requirements of the buyer, if it is negotiated between the
supplier and the buyer, and specified in the contract, steel plates or steel strips
of the following special requirements can be supplied:
a) Sulfur content range: 0.015%~0.035%;
b) Inspect the content of residual lead, arsenic, antimony, tin and titanium;
c) Inspect the oxygen and nitrogen content in the steel;
8 Non-metallic inclusions 1 pc/ batch
Any steel plate or
coil
Method A in GB/T
10561-2005
9 Ultrasonic testing
Piece by
piece - GB/T 2970-2016
10 Surface quality
Piece by
piece - Visual inspection
11 Size, shape Piece by piece -
Micrometer, sample
plate
7 Inspection rules
7.1 Inspection and acceptance
7.1.1 The delivery inspection and acceptance of steel plates and steel strips
shall be carried out by the supplier's quality and technical supervision
department.
7.1.2 The supplier shall ensure that the delivered steel plates meet the
requirements of this Standard or the contract. If necessary, the buyer has the
right to inspect and accept according to any inspection item that is specified in
this Standard or the contract.
7.2 Batch rules
Steel plates and steel strips shall be inspected and accepted in batches; each
batch shall consist of steel plates and steel strips of the same designation, the
same furnace number, the same thickness, and the same heat treatment
furnace (the continuous furnace is the same heat treatment system).
7.3 Sampling quantity and sampling p......
Related standard:   GB/T 11253-2019  GB/T 24180-2020
Related PDF sample:   GB/T 11251-2009
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2020