Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

GB/T 11213.5-2006 (GBT11213.5-2006)

GB/T 11213.5-2006_English: PDF (GBT 11213.5-2006, GBT11213.5-2006)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 11213.5-2006English135 Add to Cart 0--9 seconds. Auto-delivery Sodium hydroxide for chemical fiber use -- Determination of sulphate content Valid GB/T 11213.5-2006

BASIC DATA
Standard ID GB/T 11213.5-2006 (GB/T11213.5-2006)
Description (Translated English) Sodium hydroxide for chemical fiber use. Determination of sulphate content
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G11
Classification of International Standard 71.060.40
Word Count Estimation 6,664
Date of Issue 2006-12-29
Date of Implementation 2007-06-01
Older Standard (superseded by this standard) GB/T 11213.5-1989; GB/T 11213.6-1989
Quoted Standard GB/T 603; GB/T 6682
Adopted Standard ISO 6353-1-1982, NEQ; ASTM E291-2001, NEQ
Drafting Organization Jinxi Chemical Research Institute
Administrative Organization National Standardization Technical Committee of the chlor-alkali chemical branch
Regulation (derived from) National Standard Approval Announcement 2006 No.13 (Total No.100)
Proposing organization China Petroleum and Chemical Industry Association
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies the method for the determination of the chemical sodium hydroxide sulfate content. This standard method A suitable sodium sulfate content of 0. 001% to 0. 07 % of the products, Method B applies to sodium sulfate content equal to or greater than 0. 01 % of the product.

Standards related to: GB/T 11213.5-2006

GB/T 11213.5-2006
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.060.40
G 11
Replacing GB/T 11213.5-1989
GB/T 11213.6-1989
Sodium Hydroxide for Chemical Fiber Use – Determination
of Sulphate Content
ISSUED ON: DECEMBER 29, 2006
IMPLEMENTED ON: JUNE 01, 2007
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Method-A (Turbidimetry) ... 5
4 Method-B (Barium Sulfate Weighting Method) ... 8
5 Test Report ... 9
Foreword
The Method-A in this Standard corresponds to ISO 6353-1:1982 Reagents for Chemical
Analysis – Part 1: General Test Methods (English Version); the consistency between this
Standard and ISO 6353-1:1982 is non-equivalent. Method-B corresponds to ASTM E 291:2001
Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium
Hydroxide and Potassium Hydroxide) (English Version); the consistency between this Standard
and ASTM E 291:2001 is non-equivalent.
This Standard simultaneously replaced GB/T 11213.5-1989 Sodium Hydroxide for Chemical
Fiber Use - Determination of Sulphate Mass Fraction - Barium Sulphate Gravimetric Method,
and GB/T 11213.6-1989 Sodium Hydroxide for Chemical Fiber Use - Determination of
Sulphate Mass Fraction – Turbidimetric.
Compared with GB/T 11213.5-1989 and GB/T 11213.6-1989, the major changes of this
Standard are as follows:
--- Modify the English and Chinese names of the Standard;
--- Add the “Foreword”;
--- Modify the preparation of solution II and the pipetting volume of solution II in GB/T
11213.6-1989; add the calculation formula for the adding volume of standard solution,
and judge the turbidity by a spectrophotometer;
--- Modify the sampling volume in GB/T 11213.5-1989;
--- Modify the concentration of barium chloride solution, silver nitrate solution and methyl
orange indicator solution in GB/T 11213.5-1989 and the amount of barium chloride
solution added in the analytical procedures;
--- Modify the ignition temperature in GB/T 11213.5-1989;
--- Add the “test report”.
This Standard was proposed by China Petrol and Chemical Industry Association.
This Standard shall be under the jurisdiction of Chlor-Alkali Subcommittee of National
Technical Committee on Chemical of Standardization Administration of China (SAC/TC 63/SC
6).
Drafting organizations of this Standard: Jinxi Research institute of Chemical Industry;
Electrochemical Factory of Zhejiang Juhua Co., Ltd.; and Yunnan Salt & Salt Industry Co., Ltd.
Participating drafting organizations of this Standard: Qingdao Haijing Chemical (Group) Co.,
Ltd.; and Zigong Honghe Chemical Industry Co., Ltd.
Sodium Hydroxide for Chemical Fiber Use – Determination
of Sulphate Content
1 Scope
This Standard specifies the method for the determination of sulfate content in sodium hydroxide
for chemical fiber use.
In this Standard, Method-A is applicable to products with a sulfate content (by Na2SO4) in
sodium hydroxide of 0.001%~0.07%; Method-B is applicable to products with a sulfate content
(by Na2SO4) in sodium hydroxide equal to or greater than 0.01%.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments (excluding
corrigendum) or revisions do not apply to this Standard, however, parties who reach an
agreement based on this Standard are encouraged to study if the latest versions of these
documents are applicable. For undated references, the latest edition of the referenced document
applies.
GB/T 603 Chemical Reagent – Preparations of Reagent Solution for Use in Test Methods
(GB/T 603-2002, neq ISO 6353-1:1982)
GB/T 6682 Water for Laboratory Use – Specifications (GB/T 6682-1992, neq ISO
3696:1987)
3 Method-A (Turbidimetry)
3.1 Principle
In acidic medium (hydrochloric acid), barium ions react with sulfate ions to form insoluble
barium sulfate.
When the sulfate ion content is very small, the barium sulfate will be suspended within a certain
period of time, making the solution turbid; and the sulfate content can be determined by visual
turbidimetry.
3.2 Reagents and materials
The reagents and water used in this method, unless otherwise specified, refer to analytical
reagents and third-grade water (free of carbon dioxide) specified in GB/T 6682. The standard
solutions, preparations and products required in the test, unless otherwise specified, shall be
prepared according to the provisions of GB/T 603.
3.2.1 Hydrochloric acid.
3.2.2 Hydrochloric acid solution: The mass fraction is 20%.
3.2.3 Potassium sulfate ethanol solution: 0.2 g/L. Weigh 0.02g of potassium sulfate and dissolve
it in a solution of 30 mL of ethanol and 70 mL of water.
3.2.4 Barium chloride (BaCl2 • 2H2O) solution: 250 g/L. Weigh 25g of barium chloride
dihydrate, dissolve in water, and dilute to 100mL.
WARNING -- Barium chloride is toxic, irritant and harmful if inhaled or ingested. After
contact with skin, rinse immediately with plenty of water.
3.2.5 Sulfate standard solution: 0.1 mg/mL. Weigh 0.100g of anhydrous sodium sulfate that has
been dried at (105~110) °C in advance and has a constant mass; dissolve it in water; transfer it
all into a 1000 mL volumetric flask; dilute with water to the mark; and shake well.
3.2.6 Sulfate standard solution: 0.01 mg/mL. Dilute the sulfate standard solution (3.2.5) to 10
times with water; and prepare this solution before use.
3.2.7 Phenolphthalein indicator solution: 10 g/L.
3.3 Apparatus
General laboratory instruments and the following instruments.
3.3.1 25 mL colorimetric tube.
3.3.2 Spectrophotometer.
3.4 Preparation of specimen solution
3.4.1 Solution I: Weigh 50 g of laboratory samples, accurate to 0.01 g; dissolve in 200 mL of
water; and then dilute to 250 mL.
3.4.2 Solution II: Take 50 mL of solution I by a pipette; use phenolphthalein (3.2.7) as the
indicator solution; neutralize it with hydrochloric acid solution (3.2.1); and dilute to 100 mL
with water after cooling.
3.5.6 Use visual turbidimetry to compare the turbidity of the specimen with the turbidity
presented by the specified standard comparison solution.
If the turbidity of the specimen is close to the turbidity of the standard comparison solution and
cannot be judged accurately by visual inspection; a spectrophotometer can be used to select a
suitable cuvette for comparison at a wavelength of 450 nm.
4 Method-B (Barium Sulfate Weighting Method)
4.1 Principle
After the sodium hydroxide product is dissolved in water, filter out the insoluble matter; add
barium chloride solution; barium ions react with sulfate ions to form insoluble barium sulfate;
and the sulfate content in the product can be calculated by weighing the quality of barium
sulfate.
4.2 Reagents and materials
The reagents and water used in this method, unless otherwise is specified, refer to analytical
reagents and Grade-3 water (free of carbon dioxide) specified in GB/T 6682. The standard
solutions, preparations and products required in the test, unless otherwise is specified, shall be
prepared according to the provisions of GB/T 603.
4.2.1 Hydrochloric acid.
4.2.2 Nitric acid.
4.2.3 Barium chloride (BaCl2 • 2H2O) solution: 250 g/L. Weigh 25g of barium chloride
dihydrate; dissolve in water, and dilute to 100mL.
4.2.4 Silver nitrate solution: 5g/100mL. Weigh 5g of silver nitrate; dissolve it in a small amount
of water; add 5 mL of nitric acid (4.2.2); and dilute with water to 100mL.
4.2.5 Methyl orange indicator solution: 1g/L.
4.3 Instruments and equipment
General laboratory instruments and the following equipment.
4.3.1 Porcelain crucible: 30mm×30mm.
4.3.2 Oven.
4.3.3 High temperature furnace.
4.4 Analytical procedures
...