GB/T 10357.2-2013 PDF English
US$85.00 · In stock · Download in 9 secondsGB/T 10357.2-2013: Test of mechanical properties of furniture - Part 2: Stability of chairs and stools Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 10357.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 10357.2-2013 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Test of mechanical properties of furniture - Part 2: Stability of chairs and stools
| Valid |
| GB/T 10357.2-1989 | English | 305 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Test of mechanical properties of furniture--Stability of chairs and stools
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 10357.2-2013
GB/T 10357.2-2013: Test of mechanical properties of furniture - Part 2: Stability of chairs and stools
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT10357.2-2013
ICS 97.140
Y80
GB
National Standard
of the People's Republic of China
Replacing GB/T 10357.2-1989
Test of mechanical properties of furniture
Part 2.Stability of chairs and stools
Issued on. OCTOBER 10, 2013
Implemented on. MAY 1, 2014
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration Committee of the People's Republic
of China (SAC)
Table of Contents
Foreword... 3
1 Scope... 6
2 General test conditions... 6
3 Test facility... 7
4 Test procedure... 8
Foreword
GB/T 10357 “Test of mechanical properties of furniture” is divided into eight parts.
- Part 1.Strength and durability of tables;
- Part 2.Stability of stools;
- Part 3.Strength and durability of stools;
- Part 4.Stability of cabinets;
- Part 5.Strength and durability of cabinets;
- Part 6.Strength and durability of beds;
- Part 7.Stability of tables;
- Part 8.Stability of chairs and rocking chairs which have inclining and reclining
mechanical properties when they are fully leaned backward.
This Part is part 2 of GB/T 10357.
This Part is drafted according to the rules given by GB/T 1.1-2009.
This Part replaces GB/T 10357.2-1989 ”Test of mechanical properties of furniture -
Stability of chairs and stools”.
Compared with GB/T 10357.2-1989, main technical changes of this Part are as
follows.
- MODIFY the standard name, so to be consistent with the standard number;
- MODIFY the position of test load, CHANGE “the loading position at centerline of seat
surface where is 50 mm away from the frontier and the edge” TO “where is 60
mm away from the frontier and the edge”, MODIFY the armrest loading
position from 37.5 mm away from the outer edge of the armrest TO 40mm
away from that;
- ADD the staying time of test load;
- MODIFY the requirements of anticline angle when the anticline angle of test chair is
adjustable. CHANGE “the anticline angle shall be adjusted to 100°~ 110°
position” TO “the back of chairs shall be adjusted to the most vertical position”.
- CONVERT the chart in Appendix A directly into calculation formula, and DELTE
Appendix A.
Please note that some of the contents of this document may involve patents. The
issuing organizations of this document do not assume responsibility for the
identification of these patents.
This Part was proposed by China Light Industry Federation.
This Part shall be administered by National Furniture Standardization Technical
Committee (SAC/TC 480).
Drafting organizations of this Part. National Centre for Quality Supervision &
Inspection of Furniture Products (Guangdong), and Dongguan Furniture Co., Ltd.
Participating organizations of this Part. Zhongshan Tailong Office Supplies Co., Ltd.,
Zhongshan Huasheng Furniture Manufacturing Co., Ltd., Zhongshan Sihai Furniture
Manufacturing Co., Ltd., Chaozhou Yangguang Technology Development Co., Ltd.,
Zhongshan Paige Furniture Co., Ltd., Shanghai Institute of Quality Inspection and
Technical Research, Shenzhen Academy Of Metrology & Quality Inspection, National
Centre for Quality Supervision & Inspection of Furniture and Indoor Environment,
Zhejiang Furniture and Hardware Institute, and Zhongshan Guojing Furniture Co., Ltd.
Main drafters of this Part. Hai Lingbo, Deng Yanping, Wang Hongqiang, Liang Depei,
Luo Jufen, Yang Jianhua, Liao Guifu, He Jianhua, Li Yanchun, Xu Jun, Chen Dongen,
Zhang Shuyan, Luo Xin, Liang Mijia, Gao Hanguang, Chen Qiugui, Liang Xikun, Xu
Fei, Wu Yanjiao, He Zhixiong, and Chen Weipeng.
The previous standard replaced by this Part is as follows.
- GB/T 10357.2-1989.
Test of mechanical properties of furniture
Part 2.Stability of chairs and stools
1 Scope
This Part of GB/T 10357 specifies two stability test methods for straight-backed chairs
and stools. Test method and calculation method. The loading-force method and
loading-force position specified by these two test methods are the same, and the
obtained test results are equivalent.
This Part applies to various straight-back chairs, stool-type furniture, deck chairs and
backrest-tiltable seat-chairs which are adjustable to be straight-back state, and they
are used in households, hotels, restaurants and other occasions.
This Part does not apply to multi-seat chairs, multi-purpose chairs, deck chairs and
backrest-tiltable seat-chairs which are adjustable to be lying state.
2 General test conditions
2.1Specimen
Samples shall be the fully assembled products which are ready to be delivered for use.
When there are several assembly methods, it shall be assembled and tested
according to the method which is the most detrimental to the stability, and it shall be
recorded in the inspection report. When there is no special instructions, it shall not
fasten connection parts during the test period.
2.2 Precision
Unless otherwise specified, ADOPT the following measurement precision.
2.3 Test placing requirements
Before the test, it shall use the stopping block to limit the legs of specimen in case of
moving the specimen, however, it shall not hinder the specimen to capsize.
For chairs equipped with swivel base, the base shall be rotated to the corresponding
position at where the seat surface can be tilted the-most-easily.
3 Test facility
3.1 General requirements for test equipment
Unless otherwise specified, any suitable test equipment can be adopted for the test.
Because the test results only depend on whether the force is applied correctly rather
than on the equipment itself.
3.2 Load pad
Rigid circular object is 200 mm in diameter, and its loading surface is spherical, the
curvature radius of the spherical surface is 300 mm, the radius of the rounding circle
of the edge is 12 mm (See Figure 1). When loading pad is applied at the loading-force
portion of the specimen, it shall not restrict the specimen from free tilting.
3.3 Stopping block
It is a device used to prevent the specimen from moving but not to limit it from tilting.
Its height shall not be greater than 12 mm. If the structure of specimen is special, it is
allowed to use greater dimensions, however, its maximum height shall be just enough
to prevent the specimen from moving.
4 Test procedure
4.1 Test method
4.1.1 Test of forward-capsize of chair
LEAN the stopping block against the front side of the chair legs (The specific locations
are shown in Figure 2); through the loading pad, vertically APPLY 600 N force at the
centerline of the seat surface where is 60 mm away from the frontier; then along the
horizontal direction, outwardly APPLY 20 N external-force at position of the contacting
seat surface; and STAY for at least 5s. (See Figure 2). RECORD whether the chair is
capsized and the actually applied force.
4 1.2 Test of lateral-capsize of non-armrest chair
LEAN the stopping block against the outside of the lateral chair legs (The specific
locations are shown in Figure 3);
4.1.3 Test of lateral capsize of armchair
LEAN the stopping block against the outside of the lateral chair legs (The specific
locations are shown in Figure 4). Vertically and downwardly APPLY 250 N force at
any intersection of - within the range of 100mm laterally away from the centerline of
seat surface AND within the range of 175 mm~250 mm away from the rear edge of
the seat surface. And then through the loading pad, vertically and downwardly APPLY
350 N force at the most unstable position on the armrest where is 40 mm away from
the edge of armrest’s outer side. Then along the horizontal direction, outwardly
APPLY 20 N external-force at position of armrest’s vertical force loading, and STAY
for at least 5s (See Figure 3). RECORD whether the chair is capsized and the actual
applied force.
4.2.2 Test of forward capsize of armchair and test of lateral capsize of
non-armchair
One after the other, LEAN the stopping block against the front side of the front
chair-legs and the outside of the two lateral chair-legs. Then one after the other,
forwardly APPLY an incremental force F0 along the midpoint of intersecting line of
seat-surface and chair-back, and horizontally APPLY an incremental force F0 along
the intersecting lines of seat-surface and chair-back towards the lateral constrained
chair-legs direction. Until the chair-legs which is opposite to the constrained legs just
leave off the ground. RECORD the unloading capsize force, and MEASURE the
distances of h and a.
4.2.4 Test of backward capsize of chair
LEAN the stopping block against the rear of the back chair-legs; then APPLY a
gradual increasing force F0, along the horizontal backward direction, onto the
centerline of chair-back where is 300 mm above the unloaded seat-surface; until the
front legs are just leaving off the ground. If the height of chair-back is lower than 300
mm, it shall exert the force at the upper-edge of chair-back.
4.2.5 Capsize test of stools at any direction
The test method is the same as that in 4.2.2.Fc shall not be less than 20 N.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 10357.2-2013 be delivered?Answer: The full copy PDF of English version of GB/T 10357.2-2013 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 10357.2-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10357.2-2013_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 10357.2-2013 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 10357.2-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10357.2-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 10357.2-2013?A step-by-step guide to download PDF of GB/T 10357.2-2013_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 10357.2-2013".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|