GB 3608: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 3608-2025 | English | RFQ |
ASK
|
3 days [Need to translate]
|
(Classification of work at heights)
| Valid |
GB 3608-2025
|
| GB/T 3608-2008 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Classification of work at heights
| Valid |
GB/T 3608-2008
|
| GB/T 3608-1993 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Classification of works at heights
| Obsolete |
GB/T 3608-1993
|
Basic data | Standard ID | GB 3608-2025 (GB3608-2025) | | Description (Translated English) | (Classification of work at heights) | | Sector / Industry | National Standard | | Date of Implementation | 2026-05-01 | | Older Standard (superseded by this standard) | GB/T 3608-2008 | | Issuing agency(ies) | State Administration for Market Regulation; Standardization Administration of China | GB/T 3608-2008: Classification of work at heights---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Classification of work at heights
ICS 13.100
C75
National Standards of People's Republic of China
Replacing GB/T 3608-1993
High job rating
Posted 2008-10-30
2009-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 3608-1993 "high job rating." This standard is GB/T 3608-1993 amendments.
This standard compared with GB/T 3608-1993, the main changes are as follows.
--- Increasing the symbol of the English term equivalents (Chapter 3 standard) and a part of the term (3.4 to 3.6 of this standard), modified
Form definition (this standard in Chapter 3; GB/T 33608-1993 of Cap), some of the terms of the order were adjusted
Whole (this standard 3.3 ~ 3.5; GB/T 3608-1993 of 3.3 to 3.5);
--- Modify the objective risk factors gusts of wind [of this standard 4.2a); GB/T 3608-1993 of 4.2a. ];
--- Modify the objective risk factors in high temperature conditions [this standard 4.2b); GB/T 3608-1993 of 4.2b. ];
--- Modify the objective risk factors in the low-temperature operating environment [this standard 4.2c); GB/T 3608-1993 of 4.2c. ];
--- Increased in cold water objective risk factors, and specific provisions [of this standard 4.2d)];
--- Modify the light and visibility conditions [this standard 4.2f); GB/T 3608-1993 of 4.2e. ];
--- Modify this objective risk factors close to or contact with hazardous voltage charged body, close to dangerous voltage having been charged body distance
Predetermined body [this standard 4.2g); GB/T 3608-1993 of 4.2f. ];
--- Modified foothold only small plane that objective risk factors, made specific quantification of "small plane" the provisions of [this standard
Quasi 4.2h); GB/T 3608-1993 of 4.2g. ];
--- Modify the physical handling than the weight limit of handling the objective risk factors, with physical strength instead of handling the weight of, and
It provides objective risk factors in the case of physical strength level [this standard 4.2i); GB/T 3608-1993 the 4.2i. ];
--- Increased in the presence of toxic gases or oxygen deficient environment, job objective risk factors for [this standard 4.2j)];
--- Modify various disasters rescue sudden the objective risk factors, increased "may cause all kinds of disasters
Content job environment "[this standard 4.2k); GB/T 3608-1993 of 4.2h.];
--- Delete the contents of Appendix A concerning notation [GB/T 3608-1993 of A1].
Appendix A of this standard is a normative appendix.
This standard was proposed by the State Administration of Work Safety.
This standard by the National Standardization Technical Committee Production Safety (SAC/TC288) explain and centralized.
This standard is drafted by. Shanghai Institute of Safety Science.
Participated in the drafting of this standard. Shanghai Waigaoqiao Shipbuilding Co., Ltd., Shanghai Academy of Real Estate Sciences.
The main drafters of this standard. Shaobao Ren, Wu Huanrong, Gu Ming ceremony, Tang Yiming, Huo Wenjing Jiang Rui Liang, Chung Ching Wei, Yin Jianguo, Jia Jun,
Ma Gang Liang.
This standard was first released in April 1983, in December 1993 the first amendment.
High job rating
1 Scope
This standard specifies the terms and definitions of operating height, height calculation methods and classification.
This standard applies to all kinds of high places.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 3869-1997 grade physical labor intensity
GB/T 4200-2008 hot job classification
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
In the fall height from the reference plane (3.2) 2m 2m or more have jobs that could fall height conducted.
3.2
Level may fall through the range (3.3) in the lowest point.
3.3
In working position as the center may fall radius (3.4) radius and draw a horizontal plane perpendicular to the cylindrical space.
3.4
To determine the scope of possible fall (3.3) and the provisions with respect to a horizontal work position distance.
NOTE. You may fall radius in meters, depending on its size and topography, terrain or building work site and other related distribution on the basis of height (3.5), with
The body specified in the statistical analysis of the many falls on the basis of accident cases made.
3.5
High in the job position as the center, 6m radius, drawn perpendicular to the horizontal plane of the cylindrical space between the lowest and the job position
Difference.
Note. The ground level is represented by m.
3.6
Operation area each work position corresponding to a fall height datum (3.2) The maximum vertical distance.
Note. high operating height in meters, calculated, see Appendix A.
|