GB 24788-2009_English: PDF (GB24788-2009)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 24788-2009 | English | 90 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Limit for the removable surface powder and water-extractable protein of medical gloves
| Valid |
GB 24788-2009
|
Preview PDF: GB 24788-2009
| Standard ID | GB 24788-2009 (GB24788-2009) | | Description (Translated English) | Limit for the removable surface powder and water-extractable protein of medical gloves | | Sector / Industry | National Standard | | Classification of Chinese Standard | G45 | | Classification of International Standard | 83.140.99 | | Word Count Estimation | 5,544 | | Date of Issue | 2009-12-15 | | Date of Implementation | 2010-10-01 | | Quoted Standard | GB/T 21869-2008; GB/T 21870-2008 | | Drafting Organization | China Rubber Group Zhuzhou Rubber Plastics Industry Research and Design Institute | | Administrative Organization | National Rubber and rubber products rubber Dairy Standardization Technical Committee Technical Committee | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 15 of 2009 (total 155) | | Proposing organization | China Petroleum and Chemical Industry Association | | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China | | Summary | This Chinese standard specifies the medical gloves surface residual powder, water extractable protein limits. This standard applies to single-use medical rubber examination gloves, disposable sterile surgical gloves like rubber, disposable medical acetonitrile rubber examination gloves, disposable medical examination gloves and disposable PVC use of non- sterile rubber surgical gloves. |
GB 24788-2009
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.140.99
G 45
Limit for the removable surface powder and
water-extractable protein of medical gloves
ISSUED ON. DECEMBER 15, 2009
IMPLEMENTED ON. OCTOBER 1, 2010
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Requirements ... 5
5 Inspection methods ... 5
Foreword
Clauses 4.1 and 4.2 of this Standard are compulsory; the rest are recommendatory.
This Standard was proposed by China Petroleum and Chemical Industry Association.
This Standard shall be under the jurisdiction of National Rubber and rubber products
Standardization Technical Committee (SAC/TC 35/SC 4).
Main drafting organizations of this Standard. Zhuzhou Research & Design Institute of
Rubber & Plastic Industry China Rubber Group, and Ansell Healthcare LLC.
Main drafters of this Standard. Guo Ping, Xiao Li’an, Li Meihui and Wang Jinying.
Limit for the removable surface powder and water-
extractable protein of medical gloves
1 Scope
This Standard specifies the limits for the removable surface powder and water-
extractable protein of medical gloves.
This Standard is applicable to disposable medical rubber examination gloves,
disposable sterile rubber surgical gloves, disposable medical nitrile rubber examination
gloves, disposable medical examination gloves and PVC disposable non-sterile rubber
surgical gloves.
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For dated references, the
subsequent amendments (excluding corrections) or revisions do not apply to this
Standard. However, the parties who enter into agreement based on this Standard are
encouraged to investigate whether the latest versions of these documents are
applicable. For undated reference documents, the latest versions apply to this
Standard.
GB/T 21869-2008 Medical gloves - Determination of removable surface powder
GB/T 21870-2008 Medical gloves made from natural rubber latex - Determination
of water-extractable protein using the modified Lowry method
3 Terms and definitions
The following terms and definitions apply to this Standard.
3.1 Powder
Under test conditions, all water-insoluble deposits that can be cleaned and removed
by water on the surface of medical gloves.
3.2 Powered glove
It refers to the gloves that are usually produced according to powder coating procedure
during manufacturing, for easy wearing.
3.3 Powder-free glove
It refers to the gloves that are consciously produced not according to powder coating
procedure; or it consciously gets rid of powdering although it adopts powder coating
......
|