Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169759 (Sep 19, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart
  

GB 24786-2009

GB 24786-2009_English: PDF (GB24786-2009)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusGoogle Book
GB 24786-2009English145 Add to Cart 0--10 minutes. Auto-delivered. Single-use medical poly (vinyl chloride) examination gloves GB 24786-2009 Valid GB 24786-2009
 

BASIC DATA
Standard ID GB 24786-2009 (GB24786-2009)
Description (Translated English) Single-use medical poly (vinyl chloride) examination gloves
Sector / Industry National Standard
Classification of Chinese Standard G45
Classification of International Standard 11.140; 83.140.99
Word Count Estimation 10,182
Date of Issue 2009-12-15
Date of Implementation 2010-10-01
Quoted Standard GB/T 528; GB/T 2828.1; GB/T 2941-2006; GB/T 3512; GB/T 16886; YY 0466-2003
Adopted Standard ISO 11193-2-2006, MOD
Drafting Organization Shandong Blue Sail Plastic & Rubber Co., Ltd.
Administrative Organization National Rubber and rubber products rubber Dairy Standardization Technical Committee Technical Committee
Regulation (derived from) Announcement of Newly Approved National Standards No. 15 of 2009 (total 155)
Proposing organization China Petroleum and Chemical Industry Association
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This Chinese standard specifies the non-sterile or sterile packaged as a medical examination and diagnostic procedures to prevent cross-infection between patients and users requirements or PVC gloves when treating patients in order to prevent cross-infection and the use of PVC gloves requirements, but also for handling contaminated medical materials PVC gloves.

GB 24786-2009
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 11.140; 83.140.99
G 45
Single-use Medical Poly (vinyl chloride) Examination
Gloves
[ISO 11193-2:2006, Single-use Medical Examination Gloves - Part 2:
Specification for Gloves Made from Poly (vinyl chloride), MOD]
ISSUED ON: DECEMBER 15, 2009
IMPLEMENTED ON: OCTOBER 1, 2010
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3 Classification ... 5 
4 Materials ... 5 
5 Sampling and Selection of Test Pieces ... 6 
6 Requirements ... 6 
7 Packaging ... 10 
8 Marking ... 10 
Appendix A (normative) Water Impermeability ... 13 
Single-use Medical Poly (vinyl chloride) Examination
Gloves
Warning: users of this Standard shall be familiar with normal laboratory
practices. This Standard does not involve any safety issues, even those related
to it are not an exception. Users shall establish corresponding safety and health
specifications; ensure the compliance with national regulations.
1 Scope
This Standard stipulates the requirements for non-sterile or packaged sterile poly (vinyl
chloride) gloves used to prevent cross infection between patients and users during
medical examination and diagnosis, or, the requirements for poly (vinyl chloride) gloves
used to prevent cross infection during treatment of patients. It also includes poly (vinyl
chloride) gloves used for the disposal of contaminated medical materials.
This Standard stipulates the performance and safety requirements for single-use
medical poly (vinyl chloride) examination gloves. However, the safe and correct usage,
the sterilization process and the subsequent processing, packaging and storage
processes of the examination gloves are not within the scope of this Standard.
This Standard is applicable to single-use medical poly (vinyl chloride) examination
gloves for medical examination, diagnosis or treatment of patients, and disposal of
contaminated medical materials.
2 Normative References
Through the reference in this Standard, clauses of the following documents become
clauses of this Standard. In terms of references with a specific date, all the subsequent
modification sheets (excluding the corrected content) or the revised editions are not
applicable to this Standard. However, all parties that reach an agreement in
accordance with this Standard are encouraged to explore the possibility of adopting
the latest version of these documents. In terms of references without a specific date,
the latest version is applicable to this Standard.
GB/T 528 Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress-strain
Properties (GB/T 528-2009, ISO 37:2005, IDT)
GB/T 2828.1 Sampling Procedures for Inspection by Attribute - Part 1: Sampling
Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (GB/T
2828.1-2003, ISO 2859-1:1999, IDT)
GB/T 2941-2006 Rubber - General Procedures for Preparing and Conditioning Test
Pieces for Physical Test Methods (ISO 23529:2004, IDT)
GB/T 3512 Rubber, Vulcanized or Thermoplastic - Accelerated Ageing and Heat
Resistance Tests - Air-oven Method (GB/T 3512-2001, eqv ISO 188:1998)
GB/T 16886 (All Parts) Biological Evaluation of Medical Devices (all parts) [ISO 10993
(all parts), IDT]
YY 0466-2003 Medical Devices - Symbols to be Used with Medical Device Labels,
Labelling and Information to be Supplied (ISO 15223:2000, IDT)
3 Classification
Finished gloves are classified into the following types:
a) Partial or full textured-surface gloves;
b) Smooth-surface gloves;
c) Powdered-surface gloves;
d) Powder-free-surface gloves.
NOTE 1: powdered-surface gloves: powders are added to the manufacturing process for
ease of wearing; powder-free-surface gloves: no powdered materials are
intentionally added during the manufacturing process.
NOTE 2: the cuff edge of the gloves may be straight edge with a regular cut, or, rolled rim.
4 Materials
The gloves involved in this Standard shall be made of poly (vinyl chloride) materials.
For ease of wearing, surface treatment agents, lubricants, powders or polymer
coatings may be used.
Any pigments, surface treatment agents, lubricants or powders shall be non-toxic
materials and disclosed on request. Removable substances used for surface treatment
shall be bioabsorbable.
Gloves provided to users shall comply with the requirements of relevant parts of GB/T
16886. If necessary, the manufacturer shall make the materials that comply with these
requirements easily accessible to the buyers.
NOTE: in accordance with the existing relevant national or industrial standards on test
methods, the future versions of this Standard might specify limits for extractable
b) Materials used;
c) The words “textured”, “smooth”, “powdered” or “powder-free”, or words that
have such effect on finished gloves;
d) Specifications;
e) Once gloves have been treated with any surface material, there shall be a
warning; before use, the surface powder shall be aseptically removed;
f) The manufacturer’s identifying lot No.;
g) “date of manufacture” or similar words, year (in four digits) and month of
manufacture;
h) The words “sterile, unless this package is opened or damaged”;
i) The words “examination gloves”;
j) The words “for single-use”, or words with the same meaning;
k) The words “product contains plasticizer that may be harmful to the user (the
nature of the plasticizer shall be disclosed)”.
8.2.2 Non-sterile package
Non-sterile package shall explicitly indicate the following content:
a) The manufacturer or the supplier’s name or trademark;
b) Materials used;
c) The words “textured”, “smooth”, “powdered” or “powder-free”, or words that
have such effect on finished gloves;
d) Specifications;
e) The manufacturer’s identifying lot No.;
f) The words “for single-use”, or words with the same meaning;
g) “non-sterile”;
h) The words “examination gloves”;
i) “date of manufacture” or similar words, year (in four digits) and month of
manufacture;
j) The words “product contains plasticizer that may be harmful to the user (the
Appendix A
(normative)
Water Impermeability
A.1 Device
A.1.1 Cylinder
The minimum diameter is 60 mm; it shall be able to hold 1,000 mL of water. In addition,
it shall have sufficient length to fix the gloves, as it is shown in Figure A.1.
NOTE: the cylinder shall preferably be transparent.
A.1.2 Fixture
When filling with water, it shall be able to maintain the gloves vertical, as it is shown in
Figure A.2.
A.1.3 Cylindrical measuring tool
A device with a volume of at least 1,000 mL or a device which is able to one-time
transfer 1,000 mL of water.
A.2 Procedures
Use a suitable device, for example, O-shaped ring, to fix the glove on the cylinder, so
that the glove does not exceed the cylinder by 40 mm.
Introduce 1,000 mL ± 50 mL of water (not exceeding 36 °C) into the device; wipe off
any water on the glove. If the water cannot rise to 400 mm away from the cuff edge,
raise the glove to fill the whole glove with water, excluding the part that is 40 mm away
from the cuff. Immediately pay attention to any obvious leaks. If the glove does not
immediately leak, then, observe for another 2 min ~ 4 min. Ignore leakage within 40
mm from the cuff edge. For ease of observation, water-soluble dyes may be used for
dyeing.