GB 19601-2013 PDF English
US$125.00 · In stock · Download in 9 secondsGB 19601-2013: Limit and determination of 23 harmful aromatic amines in dye products Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB 19601: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 19601-2013 | English | 125 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Limit and determination of 23 harmful aromatic amines in dye products
| Valid |
| GB 19601-2004 | English | 439 |
Add to Cart
|
4 days
|
Limit and determination of 23 harmful aromatic amines in dye products
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 19601-2013
GB 19601-2013: Limit and determination of 23 harmful aromatic amines in dye products---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB19601-2013
ICS 71.100.01; 87.060.10
G 55
National Standard
of People’s Republic of China
Replacing GB 19601-2004
Limit and determination of 23 harmful
aromatic amines in dye products
Issued on. SEPTEMBER 6, 2013
Implemented on. OCTOBER 1, 2014
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of People's Republic of China, AQSIQ;
Standardization Administration of the People's Republic of China, SAC
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Requirements... 5
4 Principles... 6
5 Experimental methods... 6
6 Minimum qualitative limit, recovery and precision... 10
7 Test report... 11
Appendix A... 12
Appendix B... 14
Appendix C... 15
Foreword
All the technical content of this Standard is mandatory.
This Standard is drafted in accordance with the rules of GB/T 1.1-2009.
This Standard replaces GB 19601-2004 "Limit and determination of 23 harmful
aromatic amines in dye products". Compared with GB 19601-2004, except editorial
changes, the major technical changes are as follows.
— DELETE the analysis methods of gas chromatographic (4.4.3.2 in 2004
edition);
— Quantitative methods have been transformed from the external-standard
method into the internal-standard method (see 5.5.3, 4.4.4.2 in 2004 edition);
— DELETE the column extraction from the sample-preparation methods (4.4.1 in
2004 edition);
— MODIFY the sample-preparation methods (see 5.5.1, 4.4.1 in 2004 edition);
— COMBINE qualitative parts and quantitative parts to analysis steps (see 5.5.2,
4.4.3 in 2004 edition);
— REMOVE the reserved time from Appendix A (Appendix A in 2004 edition);
— DELETE the recovery-rate table (Table 2 in 2004 edition).
This Standard is proposed by China Petroleum and Chemical Industry Federation.
This Standard is administered by the National Technical Committee of Dye
Standardization (SAC/TC 134)
This Standard is drafted by organizations. Shenyang Chemical Institute Co., Ltd.,
Xuzhou Kaida Fine Chemical Co., Ltd., State-Key Laboratory of Fine Chemicals of
Dalian University of Technology, Jiangsu Yabang Dye Co., Ltd., Beijing Institute of
Clothing, Institute of Product Quality Supervision and Inspection of Taizhou City, and
National Dye Quality Supervision and Inspection Center.
Chief drafters of this Standard. Ji Hao, Piao Kezhuang, Fu Ping, Peng Xiaojun, Zheng
Junliang, Shen Rijong, Ji Lanqin, Zhou Yongkai, and Li Xinggen.
The standard of previous version replaced by this Standard is.
—GB 19601-2004.
Limit and determination of 23 harmful aromatic
amines in dye products
Warning. Personnel using this Standard shall have practical working experience in
qualified laboratory. This Standard does not point out all possible safety problems.
Users are responsible for taking appropriate safety and healthy measures, and to
ensure compliance with the relevant conditions of the national regulations.
1 Scope
This Standard specifies the allowable limit and determination methods of harmful
aromatic amines in dye products (see Appendix A).
This Standard is applicable to all kinds of commercial dyes, dye products, dye
intermediates and textile-dye auxiliaries.
2 Normative references
The following documents are indispensable for the application of this document. For
dated references, only the dated edition is applicable for this document. For undated
documents, the latest version (including all amendments) applies to this document.
GB/T 6682-2008 Water for analytical laboratory use. Specification and test methods (ISO,
3696.1987, MOD)
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgment of
limiting values
3 Requirements
The content of harmful aromatic amines (see Appendix A) in dye products shall be
less than 150mg (aromatic amines)/kg (product),
4 Principles
In dielectric of citrate buffer solution (pH=6.0), The dye sample uses sodium
hyposulfite to achieve the reductive decomposition, and then uses the organic solvent
to directly extract the aromatic amines from the lysis solution.
5 Experimental methods
5.1 General provisions
Unless otherwise specified, it shall only use the reagents confirmed as analytical
reagents and grade 3 water specified by GB/T 6682-2008.Judgment of the inspection
results shall be conducted according to 4.3.3 rounding-value-comparison method in
GB/T 8170–2008.
5.2 Reagents and materials
5.2.4 Glacial acetic acid.
5.2.5 Citrate buffer solution. 0.06 mol/L aqueous solution, pH = 6 (TAKE 12.526g citric
acid and 6.320g sodium hydroxide, DISSOLVE them in water, and then DILUTE to
1000 mL).
5 2.6 Sodium hyposulfite. 200 g/L aqueous solution, when using, TAKE solid sodium
hyposulfite (content of Na2S2O4 ≥ 85%) and DISSOLVE it in water for preparation.
5.3 Instruments and equipment.
5.3.1 Balance. precision is 0.00002g.
5.3.2 Gas chromatography - mass spectrometry (GC/MS).
5.3.3 Constant-temperature water bath. temperature ranges from room temperature
to 100°C.
5.3.4 Rotating evaporator.
5.4 Preparation of standard solution
5.4.1 Preparation of single standard solution
WEIGH each 0.01g (accurate to 0.00002g) of standard material and internal standard
substance listed in Appendix A and Appendix B respectively, USE chloroform to
dissolve them and DILUTE into 10 mL volumetric flask;
5.5 Analysis steps
5.5.1 Pre-treatment of samples
WEIGH 0.2g of sample (accurate to 0.0002g), PLACE in a 100mL grinding-mouth
conical flask, ADD 24mL of citrate buffer solution, ADD 1.0mL of internal standard
solution, COVER the stopper. PUT the conical bottle into the water-bath pan in which
the temperature is 70°C±2°C to preheat for about 15 min, KEEP shaking from time to
time, LET the sample to be completely dissolved as possible.
5.5.2 Chromatography
5.5.2.1 Operating conditions of gas chromatography-mass spectrometry
Because test result depends on the instrument to be used, so it is impossible to
provide general parameters of chromatography. Using following parameters (refer to
Table 2) is proved to be suitable for test.
5.5.3 Result calculation
The content of harmful aromatic amines in sample shall be represented by mass
fraction iω, the value represented by mg/kg, calculated according to formula (1).
5.5.4 Spectrum
The total ion chromatogram of gas chromatography-mass spectrometry of harmful
aromatic amines determined by this Method refers to Appendix C.
6 Minimum qualitative limit, recovery and precision
6.1 Minimum qualitative limit
The minimum qualitative limit of this Method is 20mg/kg, the determination result is
“undetected” when it is below this limit.
6.3 Precision
In same laboratory, USE the same instrument by same operator, according to same
test method, the absolute difference values of two independent test results obtained
from the independent tests of same object in a short period of time, shall not be
greater than 30% of the arithmetic mean of these two determined values.
7 Test report
The test report shall provide following contents at least.
Appendix A
(Normative)
The table of contents of harmful aromatic amines
Table A.1 Name and related information of harmful aromatic amines
Appendix B
(Normative)
The information of internal standard
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 19601-2013 be delivered?Answer: The full copy PDF of English version of GB 19601-2013 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 19601-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB 19601-2013_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 19601-2013 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 19601-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 19601-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 19601-2013?A step-by-step guide to download PDF of GB 19601-2013_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 19601-2013".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|