GB 150.2-2011_English: PDF (GB150.2-2011)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 150.2-2024 | English | 740 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Pressure vessels - Part 2：Materials
| Valid |
GB/T 150.2-2024
|
| GB 150.2-2011 | English | 195 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
[GB/T 150.2-2011] Pressure vessels -- Part 2: Materials [including Amendment XG1]
| Valid |
GB 150.2-2011
|
Preview PDF: GB/T 150.2-2024 Standards related to: GB 150.2-2011
| Standard ID | GB 150.2-2011 (GB150.2-2011) | | Description (Translated English) | [GB/T 150.2-2011] Pressure vessels. Part 2: Materials [including Amendment XG1] [Quasi-Official / Academic version - scanned PDF, translated by Standard Committee / Research Institute in China] | | Sector / Industry | National Standard | | Classification of Chinese Standard | J74 | | Classification of International Standard | 23.020.30 | | Word Count Estimation | 53,563 | | Date of Issue | 2011-11-21 | | Date of Implementation | 2012-03-01 | | Older Standard (superseded by this standard) | GB 150-1998 ial | | Quoted Standard | GB 150.1-2011; GB 150.3-2011; GB/T 228; GB/T 229; GB/T 699; GB 713; GB/T 1220; GB/T 1221; GB/T 3077; GB 3531; GB/T 4226; GB/T 4334; GB 5310; GB 6479-2000; GB/T 6803; GB/T 7735; GB/T 8163; GB 9948; GB/T 12771; GB 13296; GB/T 14976; GB 19189; GB/T 20878; GB/T 21832; GB/T 21833; GB 24511; GB/T 24593; NB/T 47002.1; NB/T 47002.2; NB/T 47002.3; NB/T 47002.4; NB/T 47008; NB/T 47009; NB/T 47010; JB/T 4730.3; JB/T 4756; TSG R0004; ISO 9328-2-2004 | | Drafting Organization | Hefei General Machinery Research Institute | | Administrative Organization | National Standardization Technical Committee Boiler and Pressure Vessel | | Regulation (derived from) | National Standards Bulletin 2011 No. 18 | | Proposing organization | China boiler pressure vessel Standardization Technical Committee (SAC/TC 262) | | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China | | Summary | This Chinese standard applies to the pressure vessel steel pressure components which allow the use of steel and its standard, steel additional technical requirements, the use of steel (temperature and pressure) and the allowable stress. This standard applies to the design temperature -253��C ~ 800��C, the design pressure of not more than 35MPa pressure vessel. This standard does not apply to ranges: GB 150. 1 NA prescribed range, refrigeration, paper industry, container, glass-lined containers and simple pressure vessels, TSG R0004 specified in 1. 4 range. |
ICS 23.020.30
J74
National Standard of the People's Republic of China
Partially Replace GB 150-1998
Pressure Vessels - Part 2. Materials
ISSUE ON. NOVEMBER 21, 2011
IMPLEMENTED ON. MARCH 1, 2012
Issued by General Administration of Quality Supervision, Inspection and Quarantine
of the People's Republic of China
Standardization Administration of the People's Republic of China
Contents
Scope ... !
2 Normative References ... I
3 General Provisions ... 2
4 Steel Plates ... 5
5 Steel Tubes and Pipes ... 15
6 Steel Forgings ... 19
7 Steel Bars for Studs (Including Bolts) and Nuts ... 26
Appendix A (Nonnative) Supplementary Requirements Pertaining to Materials ... 35
Appendix B (Infonnative) Reference Values for Steel Prope1ties at Elevated Temperature ... 41
Appendix C (Informative) Unified Numerical Code ... 49
Appendix D (Normative) Provisions on Application ofQ235 Series Steel Plates ... 51
Pressure Vessels-Part 2. Materials
1 Scope
This part of GB 1.50 specifies the designation and the standard of steels that may be used for the
pressure· components of pressure vessels, the additional techn ical requirements of steels, and the
application scope (temperature and pressure) and allowable stress of steels.
This part is applicable to the pressure vessels with design temperature during -253 'C~800 'C
and design pressure no larger than 35MPa.
Inapplicable scope of th is part. inapplicable scope specified in GB 150.1; vessels in refrigeration
industry and papermaking industry; enamelled vessels and simple pressure vessels; scope specified in
Atticle 1.4 ofTSG R0004.
2 Normative References
The following documents are absolutely essential to the application of this Standard. For dated
reference documents, only the dated versions apply to this Standard; for undated reference documents,
the latest versions (including all amendments) apply to this Standard.
GB 150.1 - 2011 "Pressure Vessels- Part 1. General Requirements"
GB 15 0.3- 20 11 "Pressure Vessels-Pa1t 3. Design"
OBIT 228 "Metallic Materials-Tensile Testing at Ambient Temperature"
OBIT 229 "Metallic Materials-Charpy Pendulum Impact Test Method"
GBIT 699 "Quality Carbon Structural Steels"
GB 713 "Steel Plates for Boiler and Pressure Vessels"
OBIT 1220 "Stainless Steel Bars"
GBIT 1221 "Heat-resisting Steel Bars"
OBIT 3077 "Alloy Structure Steels"
GB 3531 "Low Alloy Steel Plates for Low Temperature Pressure Vessels"
GBIT 4226 "Cold Finished Stainless Steel Bar"
GBIT 4334 "Corrosion of Metals and Alloys-Test Methods for lntergranular Corrosion of
Stainless Steels"
GB 5310 "Seamless Steel Tubes and Pipes for High Pressure Boiler"
GB 6479-2000 "Seamless Steel Tubes for High-pressure for Chemical Fertilizer Equipments"
GB/T 6803 "Test Method for Drop-weight Test to Detennine Nil-ductility Transition Temperature
of Ferritic Steels"
GBIT 7735 "Steel Tubes- The Inspection Method on Eddy Current Test"
GBIT 8163 "Seamless Steel Tubes for Liquid Service"
GB 9948 "Seamless Steel Tubes for Petroleum Cracking"
GB/T 12771 "Welded Stainless Steel Pipes for Liquid Delivery"
GB 13296 "Seamless Stainless Steel Tubes for Boiler and Heat Exchanger"
GBff 14976 "Stainless Steel Seamless Tubes for Fluid Transport"
GB 19189 "Quenched a~d Tempered High Strength Steel Plates for Pressure Vessels"
GB/T 20878 "Stainless and Heat-resisting Steels-Designation and .Chemical Composition"
GB/T 21832 "Austenitic-Ferritic (Duplex) Grade Stainless Steel Welded Tubes and Pipes"
GBff 2 I 833 "Austenitic-Ferritic (Duplex) Grade Stainless Steel Seamless Tubes and Pipes"
GB 24511 "Stainless Steel Plate, Sheet and Strip for Pressure Equipments"
GB/T 24593 "Welded Austenitic Stainless Steel Tubes for Boiler and Heat-exchanger"
NB/T 47002.1 "Explosion Welded C lad Plate for Pressure Vessels-Part 1. Stainless Steel-steel
Clad Plate"
NB/T 47002.2 "Explosion Welded Clad Plate for Pressure Vessels- Prut 2. Nickel-steel Clad
Plate"
NBrr 47002.3 "Explosion Welded C lad Plate for Pressure Vessels-Part 3. Titanium-steel Clad
Plate"
NB/T 47002.4 "Explosive Welding Composite Plate for Pressure Vessels- Prut 4. Copper-steel
Clad Plate"
NB/T 47008 "Carbon Steel and Alloy Steel Forgings for Pressure Equipments"
NB/T 4 7009 "Low-alloy Steel Forgings for Low Temperature Pressure Equipments"
NB/T 47010 "Stainless and Heat-resisting Steel Forgings for Pressure Equipments"
JB/T 4730.3 "Nondestructive Testing of Pressure Equipments- Patt 3. Ultrasonic Testing"
JBIT 4756 "Nickel and Nickel Alloy Pressure Vessels"
TSG R0004 "Supervision Regulation on Safety Technology for Stationary Pressure Vessel"
ISO 9328-2. 2004 "Steel Flat Products for Pressure Purposes- Technical Delivery Conditions-
Patt 2. Non-alloy and Alloy Steels with Specified Elevated Temperature Properties"
3 General Provisions
3.1 This standard gives the relevant provisions on the steels used for the steel plates, steel tubes and
pipes, steel forgings and studs (including bolts) adopted by the pressure components of pressure vessels.
The steels used for the non-pressure components that are welded with the pressure components
shall adopt the steels with favorable weldability.
3.2 Where the steels of which the designations are not included in this standard are adopted, except
for the austenitic steels, all the other steels shall meet the relevant requirements of Appendix A. It is
allowed to adopt such austenitic steels that have been included in the relevant national standards, and
their tecl1J1ical requirements (like the provisions on phosphorus content and sulphur content as well as
the strength index) shall not be less than the provisions on those designations having the approximate
chemical compositions, among the corresponding steels listed in this ~tandard.
3.3 The steels used for the pressure components of pressure vessels shall be accompanied by the
original steel quality certificate of the steel production organization, and the vessel fabrication organization
shall conduct acceptance on steels according to the quality certificate. If the original steel quality
ce1tificate of steel production organization is unavailable, then the provisions of 2.1 in TSG R0004
shall be followed . The vessel fabrication organization shall conduct reinspection on steels if the
conditions meet those stated in 2.11 ofTSG R0004.
3.4 When selecting the steels used for the pressure components of pressure vessels, the service
conditions (like design temperat11re, design pressure, medium characteristics and operating features,
etc.), the properties of materials (mechanical properties, technological properties, chemical properties
and physical properties) as well as the fabrication technology and economical rationality of vessels
shall be taken into consideration.
3.5 The steels used for the pressure components of pressure vessels shall be killed steel smelted
through oxygen blown convetter or electric fumace. The extemal refining technology still shall be
adopted in relation to the low alloy steel plates and austenitic-ferritic stainless steel plates with the
lower limit value of standard tensile strength larger than or equal to 540MPa as well as to the low
temperature steel plates and low temperature steel forgings used at such application temperature that
islessthan -20°C.
3.6 The upper limit of the application temperature of steels used for pressure components of
pressure vessels
3.6.1 The upper limit of the application temperature of steels (the maximum design temperature of
corresponding pressure component) is the maximum temperature corresponding to the allowable stress
of every designation listed in the allowable stress tables in this standard. Ifthe steels need operating at
such temperature above the upper limit of application temperature during the technological process,
the corresponding provisions shall be specified in the design documents. The allowable stress given at
the right side of the bold line in the allowable stress table is detennined according to 1 x 1 05h
endurance strength limit of steels at elevated temperature.
3.6.2 Where the carbon steel and carbon manganese steel are used for a long time at the temperature
above 425°C, the tendency to graphitization of the carbide phase in steel shall be considered.
3.6.3 If the application temperature of austenitic steel is larger than 525 oc, the carbon content in
steel shall not be less than 0.04%.
3.7 The lower limit of the application temperature of steels used for pressure components of
pressure vessels
3.7.1 The lower limit (the minimum design temperature of corresponding pressure component) of
the application temperature of steels (excluding the austenitic steels) shall meet those specified in
Chapters 4-7.
3.7.2 Where the application temperature of austenitic steels is larger than or equal to - 196°C, such
steels may not be carried out with impact test. Where the application temperature of austenitic steels is
less than - 196°C-- 253 OC, the impact test requirements shall be specified in the design documents.
......
|