GB 14866-2023 PDF English
US$440.00 · In stock · Download in 9 secondsGB 14866-2023: General technical specification for eye and face protector Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB 14866: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 14866-2023 | English | 440 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
General technical specification for eye and face protector
| Valid |
| GB 14866-2006 | English | 185 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
The specifications for personal eye-protectors
| Obsolete |
| GB/T 14866-1993 | English | 439 |
Add to Cart
|
4 days
|
Universal technical requirements for eye and face protectors
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 14866-2023
GB 14866-2023: General technical specification for eye and face protector---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB14866-2023
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.340.99
CCS C 73
Replacing GB 14866-2006, GB 32166.1-2016
General technical specification for eye and face protector
Issued on. DECEMBER 28, 2023
Implemented on. JANUARY 01, 2025
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 4
1 Scope... 8
2 Normative references... 8
3 Terms and definitions... 8
4 Classification of eye and face protection products... 10
5 General requirements and test methods... 11
5.1 Biocompatibility... 11
5.2 Structure and adjustment... 11
5.3 Cleaning and disinfection... 11
6 Geometric optical performance requirements and testing methods... 11
6.1 Field of view... 11
6.2 Refractive power and prismatic power mutual deviation of plain-glass eye and face
protection products... 13
6.3 Refractive power and prismatic power mutual deviation of eye and face protection
products with vision correction function... 14
7 Physical optical performance requirements and testing methods... 14
7.1 Visible light transmittance... 14
7.2 Transmittance uniformity... 14
7.3 Scattered light... 15
7.4 Reflectance... 15
7.5 Driving transmittance requirements and traffic light identification... 15
8 Physical and mechanical performance requirements and testing methods... 15
8.1 Protection area... 15
8.2 Basic impact protection performance... 20
8.3 High-speed particle impact protection performance... 20
8.4 Impact protection performance of high and heavy objects... 21
8.5 Head bands or hair bands... 22
8.6 Material and surface quality... 22
8.7 Heat resistance... 22
8.8 UV radiation resistance... 22
8.9 Corrosion resistance... 22
8.10 Flame retardant performance... 23
8.11 Ventilation holes puncture resistance... 23
8.12 Abrasion resistance... 23
9 Marking and testing methods... 23
9.1 General requirements... 23
9.2 Permanence requirements... 23
9.3 Marking arrangement methods and requirements... 25
10 Information that is provided by the manufacturer... 25
10.1 General requirements... 25
10.2 Necessary information... 25
Appendix A (Normative) Head model for eye and face protection... 27
Appendix B (Normative) Visual field measurement methods... 28
B.1 Measuring devices... 28
B.2 Measurement steps... 28
Appendix C (Normative) Transmittance uniformity test method... 29
C.1 Test device... 29
C.2 Test procedures... 29
Appendix D (Normative) Test method for eye and face protection area coverage... 31
D.1 Test device... 31
D.2 Test procedures... 31
Appendix E (Normative) Test method for puncture resistance of ventilation holes... 32
E.1 Test device... 32
E.2 Test procedures... 32
1 Scope
This document specifies the classification, general requirements, geometrical optical
performance requirements, physical optical performance requirements, physical and
mechanical performance requirements, marking and information provided by
manufacturers, etc. of eye and face protection products.
This document applies to protection products or components used to protect the eyes or
face in production and life.
This document does not apply to welding protectors, auto-darkening welding filters,
goggles for protection against strong light sources, goggles for protection against lasers,
sunglasses and sun lenses.
2 Normative references
The following documents are referred to in the text in such a way that some or all of
their content constitutes requirements of this document. For dated references, only the
version corresponding to that date is applicable to this document; for undated references,
the latest version (including all amendments) is applicable to this document.
GB/T 2410-2008, Determination of the luminous transmittance and haze of
transparent plastics
GB 10810.4-2012, Uncut finished spectacle lenses - Part 4.Specifications and test
methods for anti-reflective coatings
GB 13511.1-2011, Assembled spectacles - Part 1.Single-vision and multifocal
GB 13511.2-2011, Assembled spectacles - Part 2.Progressive power
GB/T 30042, Personal Protective Equipment - Eye and Face Protection -
Vocabulary
GB/T 32166.2, Personal protective equipment - Eye and face protection -
Occupational eye and face protectors - Part 2.Test methods
3 Terms and definitions
Terms and definitions determined by GB/T 30042, as well as the following, are
applicable to this document.
3.1 lenses covering one eye
Lenses that can only cover one eye before fitting, as shown in Figure 1.
Figure 1 – Schematic diagram of lenses covering one eye
3.2 lenses covering both eyes
Lenses that can cover two eyes before fitting, as shown in Figure 2.
Figure 2 – Schematic diagram of lenses covering both eyes
3.3 spherical power
Arithmetic mean of the focal lengths of the lenses on two perpendicular principal
meridians.
3.4 astigmatic power
Absolute value of the difference in focal power between two perpendicular principal
meridians of the lenses.
4 Classification of eye and face protection products
According to the appearance and structure, eye and face protection products can be
divided into glasses, eye masks, face shields, etc. Examples of common eye and face
protection products are shown in Figures 3, 4 and 5.
5 General requirements and test methods
5.1 Biocompatibility
Eye and face protection products shall meet the requirements of the intended use and
use environment, and shall not contain any factors that affect the health or safety of the
wearer.
5.2 Structure and adjustment
Eye and face protection products shall not have protrusions, sharp edges, or other parts
that may cause discomfort or injury during use.
For structures or accessories on eye and face protection products that can be
disassembled, adjusted, and replaced, manufacturers shall ensure the convenience of
disassembly, adjustment, and replacement, and simplify the operation process as much
as possible. The operation process shall comply with ergonomic requirements. Products
shall be inspected by visual inspection, touch and other methods.
5.3 Cleaning and disinfection
The manufacturer shall provide the materials, methods and steps for cleaning,
disinfection and maintenance of eye and face protection products in the instructions for
use.
6 Geometric optical performance requirements and testing methods
6.1 Field of view
6.1.1 Eye and face protection products not applicable to road driving
For eye and face protection products that are not suitable for road driving, the horizontal
bitamporal field of view of each eye in the wearing position shall not be less than 30°,
the horizontal nasal field of view shall not be less than 30°, and the vertical field of
view shall not be less than 30° in both the upper and lower directions of the line of sight.
6.1.2 Eye and face protection products applicable to road driving
For eye and face protection products that are applicable to road driving, the horizontal
bitamporal field of view of each eye in the wearing position shall not be less than 60°,
the horizontal nasal field of view shall not be less than 30°, and the vertical field of
view shall not be less than 30° in both the upper and lower directions of the line of sight.
See Figure 7 for a schematic diagram.
6.2 Refractive power and prismatic power mutual deviation of plain-glass eye and
face protection products
6.2.1 Spherical power, astigmatic power and prismatic power
The spherical power, astigmatic power and prismatic power of plain-glass eye and face
protection products shall meet the requirements of Table 1.For eye and face protection
products that use lenses covering both eyes, the absolute value of the difference in
spherical power at the reference point of the left and right eyes shall be less than 0.09
D.
6.2.2 Prismatic power mutual deviation
The prismatic power mutual deviation of plain-glass eye and face protection products
and lenses covering both eyes shall meet the requirements of Table 2.Test according to
the method given in GB/T 32166.2.
6.3 Refractive power and prismatic power mutual deviation of eye and face
protection products with vision correction function
For eye and face protection products with vision correction function, equipped with
single vision lenses and multifocal lenses, their optical performance shall meet the
requirements of 5.6 in GB 13511.1-2011, which shall be tested in accordance with the
method given in Chapter 6 of GB 13511.1-2011.
7 Physical optical performance requirements and testing
methods
7.1 Visible light transmittance
For eye and face protection products without light filtering effect, the visible light
transmittance at the reference point shall not be less than 85%. Test according to the
method given in GB/T 32166.2.
7.2 Transmittance uniformity
Unless otherwise specified, the transmittance uniformity of eye and face protection
products with light filtering effect shall meet the following requirements.
7.3 Scattered light
The wide angle scattering value shall not be greater than 2%. When the visible light
transmittance of eye and face protection products is not less than 15%, the test shall be
carried out according to the method given in 7.1 of GB/T 2410-2008.When the visible
light transmittance of eye and face protection products is less than 15%, the test shall
be carried out according to the method given in 7.2 of GB/T 2410-2008.
7.4 Reflectance
For eye and face protection products coated with an anti-reflection coating, the visible
light reflectance shall be less than 2.5%. Test according to the method given in 5.3 of
GB 10810.4-2011.
7.5 Driving transmittance requirements and traffic light identification
7.5.1 Transmittance requirements
The visible light transmittance of eye and face protection products suitable for driving
shall not be less than 8%. Test according to the method given in GB/T 32166.2.
8 Physical and mechanical performance requirements and
testing methods
8.1 Protection area
8.1.1 Eye protection area
Figure 8 and Table 4 show the basic eye protection area. All eye and face protection
products applicable to this document shall be able to cover this area and ensure the
safety of the wearer. For eye and face protection products with side protection, the side
protection area in Figure 8 shall also be covered.
8.2 Basic impact protection performance
Basic impact protection performance is the minimum mechanical strength requirement
for eye and face protection products. All eye and face protection products to which this
document is applicable shall meet the requirement.
8.3 High-speed particle impact protection performance
According to the impact speed, high-speed particle impact protection performance can
be divided into three grades. low speed, medium speed, and high speed. Table 8 gives
the impact speed and minimum protection area size of high-speed particle impact
protection performance. For eye and face protection products with high-speed particle
impact protection performance, the products shall be classified according to their
performance and it shall be ensured that the products meet the requirements.
Test according to the method given in GB/T 32166.2.
8.4 Impact protection performance of high and heavy objects
By default, the medium-sized head model in accordance with Table A.1 shall be used
for testing, and the protection area is shown in Figure 10 and Table 6.During the test,
the eye and face protection product shall be in the wearing position. There are two test
positions, namely the front of the left eye and the front of the right eye.
Tested according to the method given in GB/T 32166.2, eye and face protection
products shall not have the following conditions.
8.5 Head bands or hair bands
The head band or hair band shall be adjustable or self-adjusting. Carry out the test by
visual inspection.
8.6 Material and surface quality
Except for the 5 mm wide area at the edge of the lens, there shall not be any surface
defects that may damage vision, such as bubbles, scratches, impurities, dark spots,
corrosion spots, mildew, dents, repair spots, specks, blisters, water stains, holes, gas
impurities, chips, cracks, polishing defects or ripples, etc., within a circular area with a
radius of 30 mm centered on the reference point.
Test according to the method given in GB/T 32166.2.
8.7 Heat resistance
After testing, the sample shall not have deformation or parts falling-off.
Test according to the method given in GB/T 32166.2.
8.8 UV radiation resistance
Tested according to the method given in GB/T 32166.2, eye and face protection
products shall meet the following requirements.
8.10 Flame retardant performance
Eye and face protection products shall not continue to burn after the steel rod is removed
(except for head bands).
Test according to the method given in GB/T 32166.2.
8.11 Ventilation holes puncture resistance
For eye and face protection products with ventilation devices, the ventilation holes shall
be able to prevent the entry of long rods with a diameter of 1.5 mm.
Test according to the method in Appendix E.
8.12 Abrasion resistance
Test according to the method given in GB/T 32166.2.After the test, its wide-angle
scattering shall not be greater than 8%.
9 Marking and testing methods
9.1 General requirements
The marking of eye and face protection products can be marked on the appropriate
location outside the minimum field of view of the product – such as the frame, lens
edge, visor surface edge, etc. – by spraying, etching, molding, etc. Under normal
lighting conditions, markings shall be clear and easy to read. Use visual inspection methods.
9.2 Permanence requirements
During the use of the product, the marking shall not be unreadable due to peeling,
corrosion or wear. Table 10 gives the markings and corresponding requirements for eye
and face protection products. Use visual inspection methods.
9.3 Marking arrangement methods and requirements
The markings of eye and face protection products consist of basic marking, size
marking, driving and traffic light identification marking, and high-speed particle impact
protection performance marking. Eye and face protection products shall be marked
according to the above requirements and ordering.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 14866-2023 be delivered?Answer: The full copy PDF of English version of GB 14866-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 14866-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB 14866-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 14866-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 14866-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 14866-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 14866-2023?A step-by-step guide to download PDF of GB 14866-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 14866-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|