GB/T 1.2-2020 PDF English
US$320.00 · In stock · Download in 9 secondsGB/T 1.2-2020: Directives for standardization - Part 2: Drafting rules of standardizing documents based on ISO/IEC standardizing documents Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 1.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 1.2-2020 | English | 320 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Directives for standardization - Part 2: Drafting rules of standardizing documents based on ISO/IEC standardizing documents
| Valid |
| GB/T 1.2-2002 | English | 799 |
Add to Cart
|
5 days
|
Directives for standardization -- Part 2: Methodology for the content of normative technical elements in standards
| Obsolete |
| GB/T 1.2-1996 | English | RFQ |
ASK
|
9 days
|
Directives for the work of standardization--Unit 1: Drafting and presentation of standards--Part 2: Rules for publishing standards
| Obsolete |
| GB 1.2-1988 | English | RFQ |
ASK
|
3 days
|
Directives for the work of standardization--Rule for publishing standards
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 1.2-2020
GB/T 1.2-2020: Directives for standardization - Part 2: Drafting rules of standardizing documents based on ISO/IEC standardizing documents
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1.2-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 01.120
CCS A 00
Replacing GB/T 20000.2-2009, GB/T 20000.9-2014
Directives for standardization - Part 2.Drafting rules of
standardizing documents based on ISO/IEC standardizing
documents
(ISO/IEC Guide 21.2005, Regional or national adoption of International Standards
and other International Deliverables, NEQ)
Issued on. NOVEMBER 19, 2020
Implemented on. JUNE 01, 2021
Issued by. State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword... 3
Introduction... 6
1 Scope... 8
2 Normative references... 8
3 Terms and definitions... 8
4 Degree of consistency and double numbers... 10
4.1 Classification for degree of consistency... 10
4.2 Identifier for degree of consistency... 13
4.3 Double numbers... 13
5 Overall principles and requirements... 13
5.1 Comply with relevant ISO/IEC rules and policy documents... 13
5.2 Comply with the drafting rules of standardizing documents in China... 14
5.3 Identical or modified adoption combining with national conditions... 14
5.4 Draft as the corresponding type of national standardizing document... 14
5.5 Draft as a one-to-one national standardizing document... 14
5.6 Incorporate amendments and/or technical corrigenda... 15
5.7 Comply with the translation rules for auxiliary verbs in terms... 15
6 Drafting steps... 15
7 Compilation of elements... 16
7.1 Cover... 16
7.2 Foreword... 16
7.3 Introduction... 18
7.5 Contents of normative elements... 21
7.6 Bibliography... 22
8 Writing of appendices... 23
Annex A (normative) Translation of auxiliary verbs in clauses of ISO/IEC standardizing
documents... 24
Annex B (informative) Examples for the description of the relationship between
national standardizing documents and ISO/IEC standardizing documents in the
Foreword... 26
Annex C (informative) Examples for expressing technical deviations and their reasons
in different situations... 29
Annex D (informative) Examples for a list of structure number comparisons and a list
of technical deviations and their reasons... 31
1 Scope
This document defines the degree of consistency between the national standardizing
documents and the corresponding ISO/IEC standardizing documents 1.It establishes
the general principles and requirements for drafting national standardizing documents
based on ISO/IEC standardizing documents. It specifies the drafting steps, relevant
elements and rules for the preparation of appendices.
The document is suitable for drafting national standardizing documents based on
ISO/IEC standardizing documents. When drafted on the basis of standardizing
documents published by other organizations, they are used by reference in accordance
with the copyright and adoption policies of the corresponding organizations.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 1.1, Directives for standardization - Part 1.Rules for the structure and
drafting of standardizing documents
GB/T 20000.1, Guide for standardization - Part 1.Standardization and related
activities - General vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T 1.1 and
GB/T 20000.1 as well as the followings apply.
3.1 standardizing document
3.1.1 Technical Specification; TS
3.4 technical deviation
Changes in technical content between national standardizing documents and
corresponding ISO/IEC standardizing documents.
3.5 editorial change
Changes between national standardizing documents and corresponding ISO/IEC
standardizing documents without changing the technical content.
3.6 vice versa principle
A principle that it is acceptable in ISO/IEC standardizing documents, that is, it is also
acceptable in national standardizing documents; conversely, it is acceptable in national
standardizing documents, that is, it is also acceptable in ISO/IEC standardizing
documents.
4 Degree of consistency and double numbers
4.1 Classification for degree of consistency
4.1.1 Classification
The degree of consistency between national standardizing documents and
corresponding ISO/IEC standardizing documents is divided into identical, modified and
not equivalent. Among them, the identical and modified belong to the adoption of
ISO/IEC standardizing documents.
4.1.2 Identical
4.1.2.1 When the degree of consistency between the national standardizing document
and the corresponding ISO/IEC standardizing document is "equivalent", the following
situations exist.
4.1.3 Modified
4.1.3.1 When the degree of consistency between the national standardizing document
and the corresponding ISO/IEC standardizing document is "modified", at least one of
the following situations exists.
4.1.4 Not equivalent
When the degree of consistency between the national standardizing document and the
corresponding ISO/IEC standardizing document is "not equivalent", at least one of the
following situations exists.
4.2 Identifier for degree of consistency
The identifier for the degree of consistency is composed of "corresponding ISO/IEC
standardizing document number", "," and "code of the degree of consistency", for
example. ISO 9000.2015, IDT.
4.3 Double numbers
4.3.1 When the degree of consistency is "identical", the number of national
standardizing documents shall use double numbers, that is, "national standardizing
document number/corresponding ISO/IEC standardizing document number", so that
readers can clearly know the information of "identical" before consulting the content.
Double numbers is only used on the front cover, header, back cover and copyright page
in national standardizing documents.
4.3.2 When the degree of consistency is "modified" or "not equivalent", the number of
national standardizing documents shall not use double numbers.
5 Overall principles and requirements
5.1 Comply with relevant ISO/IEC rules and policy documents
Under the premise of complying with ISO, IEC rules and policy documents on
copyright, copyright use rights, sales and patents of its publications, draft national
standardizing documents that have a consistent correspondence with ISO/IEC
standardizing documents.
5.4 Draft as the corresponding type of national standardizing document
When drafting a national standardizing document that has a consistent correspondence
with the ISO/IEC standardizing document, it is advisable to draft the ISO/IEC standard
as a national standard.
5.5 Draft as a one-to-one national standardizing document
An ISO/IEC standardizing document shall correspond to a national standardizing
document. It is not suitable to correspond to multiple national standardizing documents.
Multiple ISO/IEC standardizing documents shall not correspond to one national
standardizing document.
5.6 Incorporate amendments and/or technical corrigenda
When ISO/IEC standardizing documents are adopted, all amendments and/or technical
corrigenda of published ISO/IEC standardizing documents shall be included in national
standardizing documents.
5.7 Comply with the translation rules for auxiliary verbs in terms
When the auxiliary verbs in the clauses of ISO/IEC standardizing documents are
translated into active verbs in national standardizing documents, they shall comply with
the provisions of Annex A.
6 Drafting steps
Take the following steps to draft a national standardizing document that has a consistent
correspondence with the ISO/IEC standardizing document.
7 Compilation of elements
7.1 Cover
National standardizing documents that have a consistent correspondence with ISO/IEC
standardizing documents shall be listed under the English translation of the name of the
national standardizing document on the cover. Give the identifier of the degree of
consistency and add parentheses (see Example 1).
7.2 Foreword
7.2.1 General
7.2.1.1 For national standardizing documents that have consistent correspondence with
ISO/IEC standardizing documents, the foreword of ISO/IEC standardizing documents
shall not be retained.
7.2.2 Identical
When the degree of consistency is "identical", according to the specific situation of the
national standardizing document formed, it shall be stated in the foreword (see Example
7.2.3 Modified
7.2.3.1 When the degree of consistency is "modified", according to the specific situation
of the national standardizing document formed, it shall be stated in the foreword (see
Example 2 of Annex B).
7.2.3.2 When stating the change in structure, it is advisable to give a comparison of the
structure numbers of national standardizing documents and ISO/IEC standardizing
documents in the form of items (see Example 2 in Annex B). When there are many
changes in structure, it is advisable to make those changes an informative appendix. At
the same time, indicate the appendix (see Example 3 of Annex B).
7.3 Introduction
The content of the introduction of the ISO/IEC standardizing document can be
incorporated into the introduction of the national standardizing document as needed.
The introduction of the ISO/IEC standardizing document shall not be retained.
7.4 Normative references
7.4.1 The list of documents in the element "Normative references" shall be rewritten.
7.5.2 Indication of changes in technical content
7.5.2.1 When the modification adopts ISO/IEC standardizing documents, if there are
many technical deviations, then it shall be marked with a vertical single line (|) in the
outer margin of the corresponding technical deviation clause (see example). The
specific marked location is.
8 Writing of appendices
8.1 For national standardizing documents whose consistency level is "identical", if
informative appendices are added, these appendices shall be placed after the appendices
of the corresponding ISO/IEC standardizing documents. They are numbered separately
in the order in which they are removed from the article.
8.2 For national standardizing documents whose consistency degree is "modified" or
"not equivalent", all appendices are uniformly numbered in the order in which they are
removed from the text.
8.3 When the changes in structure or technical deviations and their reasons in the
foreword are moved to the appendix, it is advisable to form tables respectively (see
Example 1 and Example 2 in Annex D).
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 1.2-2020 be delivered?Answer: The full copy PDF of English version of GB/T 1.2-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 1.2-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1.2-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1.2-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 1.2-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1.2-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 1.2-2020?A step-by-step guide to download PDF of GB/T 1.2-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 1.2-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |