GA/T 744-2013 PDF English
US$105.00 · In stock · Download in 9 secondsGA/T 744-2013: Automotive solar control window films Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureGA/T 744: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GA/T 744-2013 | English | 105 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Automotive solar control window films
| |
| GA/T 744-2007 | English | 319 |
Add to Cart
|
3 days
|
Solar window films for motor vehicles
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GA/T 744-2013
GA/T 744-2013: Automotive solar control window films---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GAT744-2013
GA
PUBLIC SAFETY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.60
T 26
Replacing GA/T 744-2007
Automotive solar control window films
ISSUED ON: AUGUST 22, 2013
IMPLEMENTED ON: DECEMBER 01, 2013
Issued by: Ministry of Public Security of the People's Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Technical requirements ... 6
5 Test methods ... 9
6 Inspection rules ... 12
7 Use requirements ... 14
8 Packaging, marks, transport and storage ... 14
Annex A (informative) Matching selection of car front windshield glass and solar
control film ... 16
Automotive solar control window films
1 Scope
This Standard specifies the technical requirements, test methods, inspection rules and
application requirements for automotive solar control window films.
This Standard is applicable to the production and inspection of automotive solar control
window films. It is also applicable to the inspection of motor vehicle safety technology.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 2680-1994, Determination of light transmittance, solar direct transmittance,
total solar energy transmittance and ultraviolet transmittance for glass in building
and related glazing factors
GB/T 5137.1, Test methods of safety glazing materials used on road vehicles - Part
1: Mechanical properties tests
GB/T 5137.2, Test methods of safety glazing materials used on road vehicles - Part
2: Optical properties tests
GB 5768.2, Road traffic signs and markings - Part 2: Road traffic signs
GB/T 8417, Colors of light signals
GB 9656, Safety technical specification for glazing materials used in power-driven
vehicles
GB 11614, Flat glass
GB 14887, Road traffic signal lamps
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T 5137.1,
GB 9656 as well as the followings apply.
3.1 automotive solar control window film
The film that pasted on the front, side and rear windshield safety glass of the car, can
block the heat of solar radiation, but does not affect the safe driving of driver himself
and others.
3.2 visible light transmittance
The ratio of the transmitted visible light flux to the incident visible light flux.
3.3 UV ray transmittance
The ratio of the transmitted UV spectral radiant flux to the incident UV spectral radiant
flux.
3.4 solar transmittance
The ratio of the transmitted solar spectral radiant flux to the incident solar spectral
radiant flux.
3.5 visible light reflectance
The ratio of reflected visible light flux to incident visible light flux.
3.6 specular reflection
A reflective phenomenon that when the parallel rays are incident on the surface of the
object, the reflected rays are still parallel, and the angle of incidence is equal to the
angle of reflection.
4 Technical requirements
4.1 Classification
4.1.1 Classified by visible light transmittance
According to the different transmittance of visible light, the automotive solar control
window film (hereinafter referred to as solar control film) is divided into Class I, Class
II and Class III.
4.1.2 Classified by solar transmittance
According to the different sunlight transmittance, the solar control film can be divided
into grade A, grade B and grade C.
4.2 General requirements
4.2.1 Appearance
The solar control film shall be free from cracks, scratches, air bubbles and damages.
5 Test methods
5.1 Preparation before the test
5.1.1 Sample preparation
Requirements for specimen preparation:
a) Randomly select a full roll of solar control film from the solar control film batch.
b) Randomly intercept 2 m2 solar control film.
c) Paste the solar control film on the automotive-grade float glass (hereinafter
referred to as float glass) of the specified size according to the manufacturer's
instructions to make a specimen. Among them, the thickness of the float glass is
3 mm±0.2 mm, and the visible light transmittance is 90%±2%, which shall meet
the requirements of GB 11614.
d) If there are special instructions in the test method (such as mechanical
performance test), prepare the specimen according to the requirements of the test.
5.1.2 Sample storage
Unless otherwise specified, the specimen shall be placed in an environment with a
temperature of 23°C ± 5°C and a relative humidity not greater than 60% for at least 24
h before the test. Then perform various tests.
5.1.3 Test conditions
Unless otherwise specified, general tests shall be carried out in an environment with a
temperature of 23°C±5°C and a relative humidity not greater than 60%.
5.2 Inspection of general requirements
In a daytime environment with illuminance greater than or equal to 150 lx, visually
inspect the specimen.
5.3 Transmittance test
5.3.1 Test geometry
Use the geometry of vertical illumination and vertical detection. The angle between the
optical axis of the illuminating beam and the normal of the sample surface does not
exceed 10°. The angle between any light in the illumination beam and the optical axis
does not exceed 5°.
5.3.2 Visible light transmittance test
Select a specimen with a size of 50 mm × 50 mm. In the spectral range of 380 nm ~ 780
nm, test the visible light spectral transmittance of float glass and float glass with solar
control film respectively. The wavelength interval is 10 nm. Calculate the visible light
transmittance T1 of float glass and the visible light transmittance T2 of float glass with
solar control film according to formula (1) in GB/T 2680-1994. Calculate the visible
light transmittance T of the solar control film according to the following formula:
5.3.3 UV ray transmittance test
Select a specimen with a size of 50 mm × 50 mm. In the 280 nm ~ 380 nm spectral
range, test the ultraviolet spectral transmittance of the specimen. The wavelength
interval is 5 nm. Calculate the UV ray transmittance of the specimen according to
formula (31) in GB/T 2680-1994.
5.3.4 Solar transmittance test
Select a specimen with a size of 50 mm × 50 mm. In the spectral range of 350 nm ~
2500 nm, test the solar light spectral transmittance of the specimen. The wavelength
interval is 10 nm. Calculate the solar transmittance of the specimen according to
formula (9) in GB/T 2680-1994.
5.4 Visible light reflectance test
5.4.1 Test geometry
Use the geometry with 5° illumination and 5° detection. The angle between the optical
axis of the illuminating beam and the normal of the sample surface does not exceed 10°.
The angle between any light in the illumination beam and the optical axis does not
exceed 5°.
5.4.2 Test method
Select a specimen with a size of 50 mm × 50 mm. Within the spectral range of 380 nm
~ 780 nm, test the visible light spectral reflectance of the glass surface and the film
surface of the specimen respectively. The wavelength interval is 10 nm. Calculate the
visible light reflectance of the specimen according to formula (4) in GB/T 2680-1994.
5.5 Traffic signal recognition test
5.5.1 Recognition test of road traffic light color
Light up a group of road traffic lights that meet the requirements of GB 14887. Place a
specimen with a size of 50 mm × 150 mm in front of the detector of the spectral analysis
system. According to the method specified in GB/T 8417, test the chromaticity
5.10 Solvent resistance test
Submerge the 50 mm × 150 mm specimen in 93# gasoline, 0# diesel oil, and SAE40
lubricating oil for 30 min respectively. After the test, take out and wipe clean. Dry at
20℃±5℃. Examine the specimen with a four-fold magnifying glass.
5.11 Mechanical property test
5.11.1 Tensile strength and tensile elongation test
Prepare three 25 mm × 150 mm solar control films. Tear off the 100 mm release film in
the middle. Put the part with the release film at both ends into the clamping device of
the electronic tensile testing machine with an accuracy of 0.5. The load shall be evenly
distributed across the width of the solar control film. Turn on the testing machine.
Stretch at a speed of 300 mm/min. Record the tensile strength and tensile elongation of
the solar control film when it breaks, respectively.
5.11.2 Adhesion strength test
Cut a 25 mm × 250 mm solar control film. Tear off the 150 mm release film. Paste it on
automotive grade float glass to make a sample. Install the sample on an electronic
tensile testing machine with an accuracy of 0.5. Make the solar control film with release
film at 180° to the base plate. The load shall be evenly distributed across the width of
the sample. Pull the solar control film at a speed of 300 mm/min. After peeling off about
25 mm, record the adhesion strength.
5.12 Radiation resistance test
Put the 50 mm × 50 mm specimen into the aging box. Irradiated by light with a spectral
wavelength of 300 nm ~ 800 nm, its radiation intensity is 1000 W/m2 ± 100 W/m2.
Within the entire specimen area, the deviation of the radiation intensity shall not be
greater than ±10%. The temperature of the blackboard in the box is 63°C±3°C. Use
continuous lighting. Test 600 h in total. After the test, retest the visible light
transmittance, solar transmittance and UV ray transmittance of the specimen.
6 Inspection rules
6.1 Inspection classification
The inspection of the solar control film is divided into type inspection and exit-factory
inspection.
6.2 Type inspection
6.2.1 Inspection conditions
The type inspection of the solar control film is carried out in the following situations:
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GA/T 744-2013 be delivered?Answer: The full copy PDF of English version of GA/T 744-2013 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GA/T 744-2013_English with my colleagues?Answer: Yes. The purchased PDF of GA/T 744-2013_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GA/T 744-2013 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GA/T 744-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GA/T 744-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GA/T 744-2013?A step-by-step guide to download PDF of GA/T 744-2013_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GA/T 744-2013".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|