GA 499.1-2010_English: PDF (GA499.1-2010)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GA 499.1-2010 | English | RFQ |
ASK
|
7 days [Need to translate]
|
Aerosol fire extinguishing system——Part 1: Condensed aerosol fire extinguishing device
| Obsolete |
GA 499.1-2010
|
Standards related to: GA 499.1-2010
| Standard ID | GA 499.1-2010 (GA499.1-2010) | | Description (Translated English) | Aerosol fire extinguishing system����Part 1: Condensed aerosol fire extinguishing device | | Sector / Industry | Public Security (Police) Industry Standard | | Classification of Chinese Standard | C84 | | Classification of International Standard | 13.220.10 | | Word Count Estimation | 41,491 | | Date of Issue | 2010-10-26 | | Date of Implementation | 2010-11-01 | | Older Standard (superseded by this standard) | GA 499.1-2004; GA 500-2004 | | Quoted Standard | GB 190; GB/T 191; GB 4066.1-2004; GB 5749; GB 9108; GB/T 9969; GB 12463; GB 14922.1; GB 14922.2; GB 14923; GB 14924.3; GB 14925; GB 19880; GA 61 | | Drafting Organization | Ministry of Public Security Tianjin Fire Research Institute | | Administrative Organization | National Fire Safety Standardization Technical Committee of the fixed fire extinguishing system sub - Technical Committee | | Regulation (derived from) | Technical Supervision Committee of the Ministry of Public Security October 26 release (China Fire Standards and Regulations Network News November 5, 2010) | | Summary | This standard specifies the terms and definitions, classifications, model numbers, requirements, test methods, inspection rules, requirements for the preparation of instructions for use and marking, packaging, transportation and storage of hot aerosol fire extinguishing installations. This standard applies to non-pipe network hot aerosol fire extinguishing devices. This standard does not apply to pipe-type hot aerosol fire extinguishing system, cold aerosol fire extinguishing equipment and aerosol fire extinguishing device used in explosive dangerous places. | GA 499.1-2010
Aerosol fire extinguishing system - Part 1. Condensed aerosol fire extinguishing device
ICS 13.220.10
C84
People's Republic of China Public Security Industry Standards
Replacing GA 499.1-2004, GA 500-2004
Aerosol fire extinguishing system
Part 1. Thermal aerosol fire extinguishing devices
Part 1. Condensedaerosolfireextinguishingdevice
Issued on. 2010-10-26
2010-11-01 implementation
People's Republic of China Ministry of Public Security
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Category 2
5 3 model designation
6 Requirement 3
7 Test methods 9
30 8 Inspection Rules
9 manuals - requirements 33
10 signs, packaging, transportation and storage 33
Appendix A (normative) Fire test procedure and number of samples means 35
Appendix B (normative) Test Procedure electric initiator 36 and the number of samples
Annex C (normative) thermal initiator test procedures and the number of samples 37
Foreword
This part of Chapter 5, Chapter 6 (except 6.14), chapter 8 and 10.1.1 are mandatory, the rest are recommended.
GA 499 "aerosol fire extinguishing system" is divided into the following sections.
--- Part 1. hot aerosol fire extinguishing apparatus;
--- Part 2. Cold aerosol fire extinguishing apparatus;
--- Part 3. Tank with smoke fire extinguishing devices;
This is Part 1 GA 499 is.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GA 499.1-2004 "aerosol fire extinguishing systems - Part 1. hot aerosol fire extinguishing device" and GA 500-2004
"Aerosol fire extinguishing agent." This part GA 499.1-2004 based, integrated content GA 500-2004 of, and GA 499.1-2004
In addition to editorial changes as compared to the outer main technical changes are as follows.
--- Increasing the Introduction (see introduction);
--- Modify the contents of the file a normative reference chapter (see Chapter 2, 2004 edition of Chapter 2);
--- Modify the terms and definitions a chapter (see Chapter 3, Section 3 of the 2004 edition);
--- Modify the content classification chapter (see Chapter 4, 2004 edition, Chapter 4);
--- Modify the model designation system (see Chapter 5, Chapter 5 of the 2004 edition);
--- Modify the requirements for a chapter (see Chapter 6, 2004 edition Chapter 6);
--- Modify a chapter test methods (see Chapter 7, Chapter 7, 2004 edition);
--- Modify the inspection rules one chapter (see Chapter 8, Chapter 8, 2004 edition);
--- Will require GA 500-2004, test methods Added a chapter after modifications incorporated in this section (see Chapter 6, Chapter 7,
GA 500 2004 edition Chapter 4, Chapter 5).
Please note that some content of this document may involve patents, the issuing authority of this document does not assume responsibility for the identification of these patents.
This part is proposed by the Ministry of Public Security Fire Department.
This part of the National Standardization Technical Committee fixed fire extinguishing system Technical Committee (SAC/TC113/SC2) centralized.
This section is responsible for drafting unit. Ministry of Public Security in Tianjin Fire Research Institute.
Participated in the drafting of this section. Shaanxi Provincial Fire Brigade, Fire Brigade in Jiangxi Province.
The main drafters of this section. Liu Lianxi, cool Zhuang, Li Shu, ROADS, high Hun Sen, Sheng Yanfeng, Lu Qiang Zheng, Bian Jianfeng, Wyatt had mine.
This part of the standard replaces the previous editions are.
--- GA 499.1-2004;
--- GA 500-2004.
introduction
Since the promulgation GA 500-2004 GA 499.1-2004 and promote the technological development of aerosol fire extinguishing system, also contributed to the relative
Off the technical specifications such as GB 50370-2006 "gas fire extinguishing system design specifications" and GB 50263-2007 "gas fire extinguishing system installation and inspection
Income standard "revision. In recent years, the product from the technical level, application areas, product type, product performance and other aspects have great hair
Exhibition, change and improve. International International Organization for Standardization (ISO ), National Fire Protection Association (NFPA), such as Underwriters Laboratories (UL)
Etc. have been published in recent years or are developing standards for this product. GA 499.1-2004 and GA 500-2004 two standard focal point
National Standardization Technical Committee fixed fire extinguishing systems and fire extinguishing agents Technical Committee Technical Committee based on the characteristics of the product, in
After extensive consultation with the manufacturer, design units, the use of units, management advice, consultation will integrate the two criteria, after the integration of content standards
Unified into Part 1 GA 499 standard, and part of the status quo and change the foreign standard products to conduct a comprehensive
Amendments.
In order to meet technological development thermal aerosol fire extinguishing devices, ensure the safety of its use, the technical content of the standard made the following changes.
1) for S and K-type aerosol fire extinguishing agent has been re-defined. This revision changes the GA 499.1-2004 press aerosols
Extinguishing agent generator chemical components were divided in principle, but the performance of aerosol fire extinguishing agent as a division of S-type gas
Sol extinguishing agent, K-type aerosol fire extinguishing agent basis. Because overcome by the chemical composition of division brings a wide variety of applications
Marketing costs and the use of excessive administrative inconvenience.
2) Categories of non-limiting temperature increase fire suppression devices. Depending on the needs of place, this type of fire extinguishing system can reduce the coolant
It uses, reducing the quality of the device itself, extinguishing effect some improvement.
3) aerosol fire extinguishing agent generating agent maximum filling quality limits. In recent years, through the thermal aerosol fire extinguishing apparatus for detecting data
And analysis of the state of the discharge from the safety and aerosol fire extinguishing agent occurs extinguishing apparatus for use in fire fighting can be fully
Combustion reaction and many other considerations, to determine the aerosol fire extinguishing agent generating agent maximum filling quality.
4) technical requirements for aerosol fire extinguishing agent and heat generating agent aerosol fire extinguishing agent can be adjusted. From a storage product performance, safety
Aspects of energy, corrosion, etc. on the 2004 version of the standard was revised and supplemented.
5) from the environmental requirements of the material and coolant cooling device is proposed in line with national environmental requirements of the regulations.
Aerosol fire extinguishing system
Part 1. Thermal aerosol fire extinguishing devices
1 Scope
GA 499 in this section specifies the terms and definitions thermal aerosol fire extinguishing apparatus, classification, model designation, requirements, test methods, inspection
Rules, manuals - requirements and signs, packaging, transportation and storage.
This section applies to non-pipe network heat aerosol fire extinguishing devices.
This section does not apply to the aerosol mesh tube heat aerosol fire extinguishing systems, cold aerosol fire extinguishing equipment used in explosive and hazardous locations
Plastic fire-fighting equipment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 190 packaging and marking of dangerous goods
GB/T 191 Packaging - Pictorial signs
GB 4066.1-2004 powder extinguishing agent Part 1. BC powder extinguishing agent
GB 5749 drinking water health standards
GB 9108 Industrial fuse
GB/T 9969 General Instructions industrial products
GB 12463 transport of dangerous goods packaging technology
GB 14922.1 Laboratory Animal parasitology rating and monitoring
GB 14922.2 Microbiology Laboratory Animal rating and monitoring
Genetic quality of GB 14923 animals mammals animal control
GB 14924.3 mice rat animal feed
GB 14925 Laboratory Animal Facilities and Environment
GB 19880 manual fire alarm button
GA 61 fixed fire extinguishing system drive, control devices General
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Aerosol extinguishing agent generating agent (hereinafter referred to as aerosol-generating agent) condensedaerosolextinguishingagentforming
compound (abbreviateaerosolformingcompound)
Aerosol fire extinguishing agent can produce heat by burning solid chemical reaction confection, generally by oxidants, reducing agents and additives.
3.2
Aerosol extinguishing agent condensedaerosolextinguishingagent
Extinguishing agent through the aerosol-generating substance produced by the combustion reaction.
...
|