|
US$929.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 99014-2014: Electrical equipment of textile machinery. General technical requirements
Status: Valid FZ/T 99014: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 99014-2014 | English | 929 |
Add to Cart
|
6 days [Need to translate]
|
Electrical equipment of textile machinery. General technical requirements
| Valid |
FZ/T 99014-2014
|
| FZ/T 99014-1995 | English | 959 |
Add to Cart
|
6 days [Need to translate]
|
Techinical conditions of textile machinery and electrical equipment
| Obsolete |
FZ/T 99014-1995
|
PDF similar to FZ/T 99014-2014
Basic data | Standard ID | FZ/T 99014-2014 (FZ/T99014-2014) | | Description (Translated English) | Electrical equipment of textile machinery. General technical requirements | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W92 | | Classification of International Standard | 59.120.01 | | Word Count Estimation | 40,454 | | Date of Issue | 10/14/2014 | | Date of Implementation | 4/1/2015 | | Older Standard (superseded by this standard) | FZ/T 99014-1995 | | Quoted Standard | GB/T 2423.1; GB/T 2423.2; GB/T 2423.3; GB/T 2423.8; GB 2894; GB/T 3805; GB/T 4026; GB 4208; GB/T 4588.1; GB/T 4588.2; GB/T 4588.3; GB/T 4728.1; GB/T 4728.2; GB/T 4728.3; GB/T 4728.4; GB/T 4728.5; GB/T 4728.6; GB/T 4728.7; GB/T 4728.8; GB/T 4728.9; GB/T 47 | | Regulation (derived from) | People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This Standard specifies the textile machinery and electrical equipment (including electronic equipment) essential requirements and the system, the introduction of power line protection terminal connection and cut-off switch, electrical equipment, control | FZ/T 99014-2014: Electrical equipment of textile machinery. General technical requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electrical equipment of textile machinery.General technical requirements
ICS 59.120.01
W92
People's Republic of China textile industry standards
Replacing FZ/T 99014-1995
Textile machinery and electrical equipment general technical conditions
Issued on. 2014-10-14
2015-04-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Table of Contents
Introduction Ⅴ
Introduction Ⅵ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Basic requirements 4
4.1 work, transport and storage conditions 4
4.2 Power requirements 4
5 introduces the power cord end connection and cut-off switch 5
5.1 introducing power line terminal 5
5.2 Power off switch 5
5.3 Grounding and safety requirements 6
Protection of electrical equipment 6 6
6 6.1 Basic requirements
6.2 Protection against electric shock 6
6.3 short-circuit and overload protection 7
6.4 Additional protection 8
6.5 Protective bonding circuit 8
The control circuit 7 and control functions 10
7.1 control circuit 10
11 7.2 Control Function
Control Function 7.3 faults 12
7.4 signal circuit 12
8 cabinet 12
Arrangement of components 12 8.1
8.2 Accessibility and maintenance 13
8.3 clearances and creepage distances 13
8.4 protection requirements 13
8.5 cabinet material channel and gate 13
8.6 cabinet appearance requirements 14
8.7 The cabinet assembly requirements 14
8.8 panel 14
8.9 Non-electrical components and devices 15
8.10 cabinet installation and removal 15
9 mounted on the machine 15 electrical devices
9.1 Basic Requirements 15
9.2 Button 16
9.3 LED indicators and display 16
9.4 Illuminated pushbutton 17
9.5 Emergency stop device 18
9.6 off the power device 18
Electronic equipment and software 10 18
10.1 Basic requirements 18
10.2 I/O 19
10.3 Programmable equipment 19
10.4 sophisticated testing and screening 19
10.5 PCB 19
19 10.6 Software
11 wires and cables 19
11.1 Basic requirements 19
11.2 insulation and fire-retardant 19
11.3 The minimum cross-sectional area 20
Carrying capacity of normal working hours 11.4 20
11.5 wires and cables voltage drop 21
12 22 Wiring technology
12.1 connections and cabling 22
12.2 wire identification 22
12.3 23 inner cabinet wiring
12.4 Wiring outside the cabinet 23
13 motor 24
13.1 Basic requirements 24
13.2 25 selected on the basis
13.3 Starting Method 25
13.4 Installation 25
13.5 25 protection
13.6 Nameplate 26
Local lighting and wiring and auxiliary equipment 14 26
14.1 the auxiliary device connection 26
14.2 26 local lighting
15 26 Flag
15.1 26 Warning Signs
Flag equipment 26 15.2
15.3 flag device 27
15.4 operation of the device features flag 27
16 Technical Paper 27
Information provided 16.1 27
16.2 List of Documents 27
16.3 installation files 27
16.4 for random 28
28 16.5 Product certification
16.6 Packing List 28
17 tests and inspections 28
17.1 Basic requirements 28
29 17.2 Environmental Testing
17.3 Protective bonding circuit continuity test 29
17.4 Insulation resistance test 29
Pressure test 29 17.5
17.6 Function test 29
17.7 Visual inspection 29
17.8 Repeat the test 30
Appendix A (informative) Old Standard table 31
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard FZ/T 99014-1995 "textile machinery and electrical equipment and technical conditions."
Compared with this standard FZ/T 99014-1995, the main differences are as follows.
--- Standard Terms re-classification schedule, the standard structure from the original 13 becomes 17;
--- Chapter 1 Clear the portable microprocessor and revised as "Textile machinery and electrical equipment (including electronic equipment) and systems group
The requirements ";
--- Increased in Chapter 2, normative references, the body of the standard referred to organize, update to the latest standards;
--- Increased Chapter 3 Terms and definitions, terms are defined in Appendix A to delete the original standard;
--- New directory, 5.2,5.3,6.1.2,6.1.3,7.3,8.6,8.7,8.8, Chapter 10, Chapter 16 and Appendix A of the contents;
--- Number of editorial changes to the content;
--- Modify the terms of the control see Appendix A.
The standard proposed by China Textile Industry Association.
This standard by the national textile machinery and accessories for Standardization Technical Committee (SAC/TC215) under the jurisdiction of the national industry standard mechanical and electrical systems
Associate Technical Committee Textile Machinery Electrical Systems Technical Committee (SAC/TC231/SC1) Professional focal point.
This standard was drafted. Beijing Jingwei Textile Machinery New Technology Co., Ltd. Yuci Jingwei Textile Machinery Branch, Qingdao Wang
Textile Machinery Company Limited and Tianjin Hongda Textile Machinery Co., Ltd. Hongda Research Institute, Shaoyang Textile Machinery Co., Ltd.
The company, controlled Jiangkang Li Zhejiang Science and Technology Co., Ltd., Zhejiang Founder Textile Machinery Testing Center Co., Ltd., Shaanxi Changling Textile Electrical and Mechanical Technology Limited
Company, modern textile equipment and technology Engineering Research Center, Zhejiang University of Technology, Hangzhou and non Technology Limited.
The main drafters of this standard. Wu Yanhong, Li Xiuling, Zhao Guan Hong, Shaosong Juan, Xu Lizhen, Hu Hongbo, Wang Haiying, Zhao Li, Lin Jian, Shi Weimin,
Xu Kangping, Zhang.
This standard replaces the standards previously issued as follows.
--- FZ/T 99014-1995.
Introduction
This standard is intended for the manufacture and use of textile machinery and electrical equipment to provide the minimum technical requirements to ensure that.
a) the safety of persons and equipment;
b) reliable, stable performance;
c) increase equipment life, easy maintenance.
Textile machinery and electrical equipment general technical conditions
1 Scope
This standard specifies the textile machinery and electrical equipment (including electronic equipment) and the basic requirements of the system, the introduction of the power cable terminal connection and disconnection
Protection switch, electrical equipment, control circuit and control functions, control cabinet, installed on the machine electrical components, electronic equipment and software, wire
Local lighting and wiring and cables, wiring technology, motors, and auxiliary equipment, marking, technical documentation, test and inspection.
This standard is applicable to the exchange rated voltage of 500V (including 500V), rated frequency is 200Hz (including 200Hz), 500V DC
(Including 500V) following electrical equipment. The voltage and frequency exceeds the index, it can refer to these standards.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat method
GB/T 2423.8 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall
GB 2894 Safety Signs and use guidelines
GB/T 3805 extra low voltage (ELV) limits
Logo GB/T basic safety rules and equipment terminals and conductor terminal 4026 HMI flag identified
GB 4208 housing protection (IP Code)
GB/T 4588.1 metal-free single hole double sided printed specification
GB/T 4588.2 metallized hole single and double sided printed specification
GB/T 4588.3 printed circuit board design and use
GB/T 4728 (all parts), Graphical symbols for electrical diagrams
GB/T 4772 (all parts) rotary motor size and power output level
GB/T 4776-2008 term electrical safety
GB/T 4942.1 overall structure of the rotary motor protection (IP code) rating
GB/T 5094.1-2002 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1. group
These rules
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements
GB/T 5465.2-2008 Graphical symbols for electrical equipment - Part 2. Graphical symbols
Preparation of GB/T 6988.1-2008 documents used in electrotechnology - Part 1. Rules
GB 7251.1-2005 Low-voltage switchgear and control equipment Part 1. Type - tested and partially type-tested assemblies
GB 7947-2010 mark HMI basic safety rules and conductor colors or alphanumeric identifier identifies
GB/T 13534 logo color code
GB/T 14048.7 low-voltage switchgear and control equipment - Part 7-1. Ancillary Terminal blocks for copper conductors
GB 14050 type of system grounding and safety technical requirements
GB/T 15543 power quality, three-phase voltage imbalance
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 99014-2014_English be delivered?Answer: Upon your order, we will start to translate FZ/T 99014-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 99014-2014_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 99014-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 99014-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 99014-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|