FZ/T 54044-2011 PDF English
US$185.00 · In stock · Download in 9 secondsFZ/T 54044-2011: Nylon 6 filament yarns for industry Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| FZ/T 54044-2011 | English | 185 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Nylon 6 filament yarns for industry
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: FZ/T 54044-2011
FZ/T 54044-2011: Nylon 6 filament yarns for industry---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/FZT54044-2011
FZ
NATIONAL STANDARD OF THE
PEOPLE'S REPUBLIC OF CHINA
ICS 59.060.20
W 52
Nylon 6 filament yarns for industry
锦纶 6工业长丝
ISSUED ON: DECEMBER 20, 2011
IMPLEMENTED ON: JULY 1, 2012
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Product identification ... 5
5 Technical requirements ... 5
6 Test methods ... 6
7 Inspection rules ... 9
8 Re-inspection rules ... 10
9 Marking, packaging, transportation and storage ... 11
Appendix A (Normative) Appearance requirements, inspection and assessment ... 13
Appendix B (Normative) Test method for strength retention rate at high temperature of
nylon 6 filament yarns for industry ... 16
Nylon 6 filament yarns for industry
1 Scope
This standard specifies the terms and definitions, product identification, technical
requirements, test methods, inspection rules, marking, packaging, transportation and
storage requirements for nylon 6 filament yarn for industry.
This standard applies to filament yarns for industry use, which are made from nylon 6
chips. This product is mainly used for rubber tires, conveyor belts, canvas, ropes,
fishing nets, etc. after post-processing. Its linear density range is 930 dtex~2100 dtex.
For other specifications of products, this standard can be used for reference.
2 Normative references
The following documents are essential for the application of this document. For
referenced documents with dates, only the versions corresponding to the dates are
applicable to this document; for referenced documents without dates, the latest versions
(including all amendments) are applicable to this document.
GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1:
Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot
inspection
GB/T 3291.1 Textiles - Terms of textile material properties and test - Part 1: Fibre
and yarn
GB/T 3291.3 Textiles - Terms of textile material properties and test - Part 3:
General
GB/T 4146.1 Textiles - Man-made fibres - Part 1: Generic names
GB/T 6502 Sampling method of man-made filament yarns
GB/T 6503 Man-made fibres - Test method of moisture regain
GB/T 6529 Textiles - Standard atmospheres for conditioning and testing
GB/T 8170 Rules of rounding off for numerical values & expression and judgment
of limiting values
GB/T 14343 Testing method for linear density of man-made filament yarns
Si -- dry heat shrinkage of each sample, %;
n -- the total number of tests.
6.4.5 Rounding of data
The test results are rounded to one decimal place in accordance with the provisions of
GB/T 8170.
6.5 Test for strength retention rate at high temperature
It is determined by negotiation between the supply and demand parties, or implemented
in accordance with Appendix B.
6.6 Moisture regain
The test shall be implemented in accordance with the provisions of GB/T 6503.
6.7 Appearance inspection
The inspection shall be implemented as agreed upon by the supply and demand parties
or in accordance with the provisions of Appendix A.
7 Inspection rules
7.1 Inspection types
All items in Table 1 are factory inspection items.
7.2 Inspection items
7.2.1 Appearance inspection items shall be inspected according to the requirements of
the supplier and the buyer or according to the requirements specified in Table A.1.
7.2.2 The physical properties shall be in accordance with the requirements of Table 1
and tested according to the test methods specified in this standard.
7.2.3 The strength retention rate at high temperature shall comply with the requirements
of 5.3 and be tested according to the test methods specified in this standard.
7.3 Batching rules
Periodic sampling is adopted within a certain range to form a test lot. A product lot can
be composed of one test lot or several test lots.
7.4 Sampling regulations
7.4.1 All appearance items shall be inspected.
7.4.2 The laboratory samples for physical property tests shall be in accordance with
GB/T 6502. The appearance and roll weight of the laboratory samples shall conform to
the corresponding grades.
7.4.3 Damaged rolls shall not be sampled.
7.5 Comprehensive assessment
7.5.1 The appearance inspection items shall be evaluated roll by roll according to the
requirements of the supplier and the buyer or as specified in Table A.1.
7.5.2 Under the condition of qualified appearance quality, the test values or calculated
values of the physical property items shall be compared with the index limit values in
Table 1 according to the rounded value comparison method in GB/T 8170, and the
lowest grade in the property items in the test lot shall be determined as the grade of the
product lot.
7.5.3 If the user has special requirements for property indicators, the classification
regulations shall be implemented in accordance with the contract standards.
8 Re-inspection rules
8.1 General
Within three months after a batch of products arrives at the consignee, a re-inspection
may be requested for acceptance or if there is any objection to the quality. If more than
one-third of the batch of products has been used, re-inspection may not be requested. If
the quality of the batch of products affects the quality of the subsequently processed
products and causes serious losses, the supply and demand parties shall analyze the
reasons, clarify the responsibilities, and negotiate a solution.
8.2 Inspection items
Same as 7.2.
8.3 Batching rules
Batches are grouped according to product lots.
8.4 Sampling regulations
8.4.1 Appearance is inspected by sampling. The sample size (code) is determined
according to the batch size and the general inspection level II in Table 1 of GB/T
2828.1-2003.
8.4.2 Laboratory samples for physical property test items shall be sampled and tested
in accordance with the provisions of 7.4.2.
8.5 Evaluation of test results
8.5.1 For appearance, according to the sample size in 8.4.1, and the acceptable quality
level AQL value of 4.0 for "normal inspection single sampling plan" in Table 2-A of
GB/T 2828.1-2003, determine the qualified acceptance number Ac and the unqualified
rejection number Re. Evaluate according to the provisions of 5.4; when the number of
unqualified rolls is ≤Ac, it is judged as the original grade; when the number of
unqualified rolls is ≥Re, it is judged as not meeting the original grade.
8.5.2 Physical property indicators shall be evaluated in accordance with 7.5.2; if they
are higher than or equal to the original grade, they shall be judged as conforming; if
they are lower than the original grade, they shall be judged as non-conforming.
9 Marking, packaging, transportation and storage
9.1 Marking
9.1.1 The product name, specification and grade as required by Chapter 4 shall be
marked in eye-catching colors on both sides of the packaging box.
9.1.2 Producer identification marks, such as manufacturer name, batch number, net
weight or gross weight, number of rolls inside, production date, implementation
standard number, and detailed address.
9.1.3 The marks of the general distributor, such as product name, trademark,
identification mark, and detailed address.
9.1.4 Warning signs such as "moisture-proof" and "handle with care" shall be marked.
9.1.5 Special labeling requirements proposed by customers shall be implemented in
accordance with the contract standards.
9.2 Packaging
9.2.1 Each roll shall have a protective layer to ensure that it is not damaged. It shall be
packaged in pallets or cartons. The packaging shall ensure that the product quality is
not damaged and is suitable for storage and transportation.
9.2.2 Each roll shall have a protective layer. The supported rolls in the packaging unit
shall be positioned and fixed, and the unsupported rolls shall be protected from damage.
9.2.3 The size of the rolls in each packaging box shall be as uniform as possible.
Different varieties, specifications, batch numbers and grades shall be packed separately.
visual inspection distance is 0.30 m~0.40 m (0.20 m~0.25 m when inspecting the
lousiness of the filament roll), and the observation angle is 40°~60° (parallel to the eyes
when inspecting the lousiness of the filament roll).
A.3.2 Equipment
A.3.2.1 Grading platform (car).
A.3.2.2 Scale, with appropriate weighing range, accurate to 0.1 kg.
A.4 Inspection steps
A.4.1 Rotate the roll on the grading device for one circle and observe the two end faces
and one cylindrical surface of the roll.
A.4.2 Inspect each roll according to the items required in Table A.1.
A.4.3 Check for lousiness by checking whether the filaments are fuzzy or the broken
ends of single filaments protrude from the surface of the multi-filament and can be seen
when facing the light.
A.4.4 Check for contamination based on visual inspection of visible oil, rust, and stains
that are difficult to clean with water.
A.4.5 Check for leap filament, which is calculated by the length of the filament strand
that deviates from the normal winding trajectory at both ends of the roll.
A.4.6 Weigh the roll and deduct the known tare, accurate to 0.5%.
A.4.7 Record the results.
A.5 Assessment rules
A.5.1 Weight of a roll
Excluding the bobbin weight, the weight of a roll is assessed according to Table A.1.
A.5.2 Lousiness
Inspect the entire surface of the roll and assess the cumulative number of lousiness on
the surface of each roll according to Table A.1.
A.5.3 Stained filament
The stained filaments are evaluated according to Table A.1.
A.5.4 Leap filament
Appendix B
(Normative)
Test method for strength retention rate at high temperature of
nylon 6 filament yarns for industry
B.1 Scope
This standard specifies the test method for strength retention rate at high temperature
of nylon 6 filament yarns for industry.
This standard is applicable to the determination of strength retention rate at high
temperature of nylon 6 filament yarns for industry; for other filaments, it can be used
as a reference.
B.2 Principle
Under specified conditions, the percentage of the breaking strength of the sample after
being treated with dry hot air to the original breaking strength is determined.
B.3 Instruments and equipment
According to the provisions of GB/T 14344, and the following equipment:
-- Constant temperature oven: the temperature can be controlled at (180±1) ℃;
-- Filament winding rack, etc.
B.4 Test conditions
B.4.1 The breaking strength test conditions are the same as those in 6.3.2.
B.4.2 The oven temperature is (180±1) ℃.
B.4.3 Processing time: 4 h.
B.4.4 Laboratory samples: Prepare the samples as in 6.1.2; test each sample twice.
B.5 Test steps
B.5.1 Prepare laboratory samples according to GB/T 6502. After conditioning, twist the
samples according to 6.3.1 and the provisions of GB/T 14344, and then conduct a tensile
test [the pre-tension of the sample's per unit linear density is (0.05±0.005) cN/dtex] to
obtain the average breaking strength before high-temperature treatment.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of FZ/T 54044-2011 be delivered?Answer: The full copy PDF of English version of FZ/T 54044-2011 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of FZ/T 54044-2011_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 54044-2011_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- FZ/T 54044-2011 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of FZ/T 54044-2011?A step-by-step guide to download PDF of FZ/T 54044-2011_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "FZ/T 54044-2011".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|