HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

FZ/T 01031-2016 PDF English

US$115.00 · In stock · Download in 9 seconds
FZ/T 01031-2016: Knitted fabric and elastic woven fabric - Determination of maximum force to seam rupture and elongation - Grab method
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

FZ/T 01031: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
FZ/T 01031-2016English115 Add to Cart 0-9 seconds. Auto-delivery Knitted fabric and elastic woven fabric - Determination of maximum force to seam rupture and elongation - Grab method Valid
FZ/T 01031-1993English199 Add to Cart 2 days Knitted fabric and elastic woven fabric - Measurement on strength and expansion of joints - Sampling and expansion method Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: FZ/T 01031-2016
      

Similar standards

GB/T 251   GB/T 730   FZ/T 01026   

FZ/T 01031-2016: Knitted fabric and elastic woven fabric - Determination of maximum force to seam rupture and elongation - Grab method


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/FZT01031-2016
FZ TEXTILE INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 59.080.30 W 04 Replacing FZ/T 01031-1993 Knitted fabric and elastic woven fabric - Determination of maximum force to seam rupture and elongation - Grab method ISSUED ON: APRIL 05, 2016 IMPLEMENTED ON: SEPTEMBER 01, 2016 Issued by: Ministry of Industry and Information Technology of the People’s Republic of China

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 5 4 Principle ... 6 5 Equipment ... 6 6 Conditioning and test atmosphere ... 6 7 Specimen ... 6 8 Steps ... 7 9 Calculation and presentation of results ... 8 10 Test report ... 9

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces FZ/T 01031-1993 Knitted fabric and elastic woven fabric - Determination of maximum force to seam rupture and elongation - Grab tensile method. Compared with FZ/T 01031-1993, the main changes are as follows: - MODIFY the standard title, from “grab tensile method” to “grab method”; - DELETE the reference to GB/T 5708 and GB/T 11050 in Clause 2 - Normative references, and ADD the reference to GB/T 3923.2; - MODIFY the requirements of Clause 5 - Equipment, to meet the requirements of GB/T 3923.2; - ADD the sewing and specimen cutting equipment required for 5.2 and 5.3 of this Standard; - DELETE “Clause 6 - Requirements for sampling” of the old standard; - SIMPLIFY the requirements of Clause 6 - Conditioning and test atmosphere, and DELETE the specification on the conditioning time of specimens; - MODIFY the sample sewing requirements in 7.2 of Clause 7 - Specimen TO that the sewing requirements shall be determined according to the relevant product standards or agreements between the parties concerned; - DELETE steps 8.1 and 8.4 in Clause 8 of the old standard; - DELETE the optional tensile speed of 200 mm/min in 8.2, and ADD the annotation description of other test speeds; - REFINE the cause of specimen rupture in 8.7, and SPECIFY the choice of results; - MODIFY the formula in 9.2 to the calculation method of seam elongation dominated by loose clamping; - ADD “a) the serial number of this Standard” in Clause 10 - Test report; - DELETE Annex A and Annex B. This Standard was proposed by China National Textile and Apparel Council. This Standard shall be under the jurisdiction of Subcommittee on Basic Knitted fabric and elastic woven fabric - Determination of maximum force to seam rupture and elongation - Grab method

1 Scope

This Standard specifies two tensile test methods to determine the seam strength and elongation of the straight-line seam type of textiles. Method A is the horizontal tensile method; Method B is the vertical tensile method. This Standard applies to knitted fabrics and elastic woven fabrics.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 6529 Textiles - Standard atmospheres for conditioning and testing GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values GB/T 3923.2 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method

3 Terms and definitions

For the purpose of this document, the following terms and definitions apply. 3.1 wale (warp) seam A seam sewed perpendicular to the fabric in the wale (warp) direction. 3.2 course (weft) seam pretension shall be kept lower than the pretension given in 8.3.1 during the entire process of installing the specimen and closing the clamps. 8.4 Under the specified pretension condition, clamp both ends of the specimen in the upper and lower clamps along the clamping mark line. Method A: The seam coincides with the longitudinal centerline of the two clamps. Method B: The seam is perpendicular to the longitudinal centerline of the two clamps and is located in the middle of the distance between the two clamps. NOTE: If the instrument does not have the conditions for applying pretension, it shall be stated in the test report. 8.5 START the instrument until the fabric breaks or the sewing thread breaks, or the seam breaks due to other reasons, and the test is terminated. 8.6 RECORD the maximum breaking strength as the seam strength and the corresponding elongation value. 8.7 RECORD the cause of specimen rupture: a) the fabric breaks; b) the fabric breaks at the jaws; c) the fabric breaks at the seam; d) the sewing thread breaks; e) the yarn slips; f) other rupture conditions. If the specimen rupture is caused by a) or b), these results shall be eliminated, and the specimen shall be re-taken to continue the test until it is guaranteed to obtain the test results of the rupture of 3 seams. If the rupture of all specimens is caused by a) or b), it shall be stated in the test report.

9 Calculation and presentation of results

9.1 Calculate the average seam strength of each seam type or wale (warp) and course (weft) respectively, in Newton (N). The calculation result is rounded off to 1 N according to GB/T 8170. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of FZ/T 01031-2016 be delivered?

Answer: The full copy PDF of English version of FZ/T 01031-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of FZ/T 01031-2016_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 01031-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- FZ/T 01031-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version FZ/T 01031-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 01031-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of FZ/T 01031-2016?

A step-by-step guide to download PDF of FZ/T 01031-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "FZ/T 01031-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9