Powered by Google www.ChineseStandard.net Database: 189759 (21 Apr 2024)


CQC-C1109-2014_English PDF
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
CQC-C1109-2014English280 Add to Cart 0--9 seconds. Auto-delivery China Compulsory Certification Implementation Detailed-Rules - Vehicle interior parts CQC-C1109-2014

Standard ID CQC-C1109-2014 (CQC C1109-2014; CQC-C11-09-2014; CQC-C1109-2014)
Description (Translated English) China Compulsory Certification Implementation Detailed-Rules - Vehicle interior parts
Sector / Industry China Quality Certification Center - CCC Implementation Detailed-Rules
Classification of Chinese Standard CQC
Classification of International Standard CNCA C11-09-2014
Word Count Estimation 27,255
Quoted Standard GB 8410
Drafting Organization China Quality Certification Center
Administrative Organization CQC
Regulation (derived from) CNCA C11-09-2014
Summary This document specifies the China Compulsory Certification (CCC) implementation Detailed-Rules for Vehicle interior parts. This document defines the Vehicle interior parts's certification unit; certification entrusting; document requirements; sample requi

Standards related to: CQC-C1109-2014

Serial No.. CQC-C1109.2014
Implementation Detailed-Rules for
China Compulsory Certification
Automotive interiors
China Quality Certification Center
Table of Contents
0. Introduction ... 5 
0.1 Terms and definitions ... 5 
0.2 Classification Management Requirements of Manufacturing Enterprises ... 5 
0.3 Requirements on Utilizing Testing Resources of Manufacturing Enterprises
 ... 7 
1. Application scope ... 8 
2. Certification standards ... 9 
3. Certification mode ... 9 
3.1 Basic Certification Mode ... 9 
3.2 Applicability of Certification Mode ... 9 
4. Division of Certification Units ... 10 
5. Certification entrusting ... 10 
5.1 Proposal and Acceptance of Certification Application ... 10 
5.2 Application Materials ... 10 
5.3 Implementation Arrangement ... 11 
6. Implementation of Certification ... 12 
6.1 Type Test ... 12 
6.2 Initial Factory Inspection ... 15 
6.3 Certification Evaluation and Determination ... 17 
6.4 Certification Time-limit ... 17 
6.5 Service-parts of discontinued vehicle model ... 17 
7. After-Certification Supervision ... 17 
7.1 After-certification follow-up inspection ... 18 
7.2 Sampling Test or Inspection at the Production On-site ... 19 
7.3 Market Sampling Test or Inspection ... 19 
7.4 Frequency and Time of After-Certification Supervision ... 20 
7.5 Record of After-Certification Supervision ... 20 
7.6 Evaluation of Supervision Result after getting the certificate ... 20 
8. Certificate ... 21 
8.1 Maintenance of the certificate ... 21 
8.2 Content of the Certificate ... 21 
8.3 Change of the Certificate ... 21 
8.4 Cancellation, Suspension and Withdrawal of the Certificate ... 22 
8.5 Use of the Certificate ... 23 
9. Certification Mark ... 23 
9.1 Mark style permitted to use ... 23 
9.2 Use Requirements ... 23 
10. Charge ... 23 
11. Certification Responsibility ... 24 
12. Procedures and Time-limit Related to Technical Disputes, Complaints and
Appeals ... 24 
Attachment 1 Requirements of Production Conformity Control Plan ... 25 
Attachment 2 Certification implementation of service parts for after-sales
maintenance for discontinued vehicle model ... 28 
0. Introduction
“Implementing Detailed-Rules for China Compulsory Certification - Automotive interiors”
(hereinafter referred to as Detailed-Rules) is compiled based on the requirements of
“Implementation Rules for China Compulsory Certification - Automotive interiors”
(CNCA-C11-09.2014) (hereinafter referred to as Implementation-Rules). This
Detailed-Rules is used together with the Implementation-Rules as supportive document.
The product scope, certification basis and all other contents of this Detailed-Rules shall
comply with relevant provisions of Implementation Rules. It shall also be adjusted
according to the Notices such as defined directory and directory adjustment that are issued
by Certification and Accreditation Administration of China (hereafter referred to as CNCA).
In accordance with the provisions of Implementation Rules, following the principles of
maintaining the effectiveness of product certification, improving quality of product, serving
certification companies, and controlling risk of certification, CQC formulates and issues this
Detailed-Rules. Through establishing the classification management requirements of
manufacturing enterprises, and combining the classification of manufacturing enterprises,
this Detailed-Rules determines the implementation requirements for China Compulsory
Certification of Automotive interiors.
0.1 Terms and definitions
0.0.1 Testing at Manufacturer’s Premises (abbreviated as TMP mode)
It means that the engineers of designated laboratory use the testing equipment in the
factory laboratory to conduct testing. The factory shall dispatch test personnel to provide
assistance. The designated laboratory will examine, approve and issue the test report.
0.1.2 Witnessed Manufacturer’s Testing (abbreviated as WMT mode)
It means that the engineer of designated laboratory witnesses the factory laboratory’s test
conditions and all tests completed by using the laboratory’s equipment or according to the
test plan submitted; or witnesses part of the test conditions and the test items. Test
personnel of the factory laboratory shall provide the original records and draft up the test
report together with the engineer of designated laboratory according to relevant provisions.
The designated laboratory shall audit, approve and issue the test report.
0.2 Classification Management Requirements of Manufacturing Enterprises
CQC collects and sorts-out all the information related to certification products and quality
related to manufacturing enterprises; and uses dynamic classification management for
manufacturing enterprises. certification entrusting client [hereafter abbreviated as CLIENT],
manufacturer and manufacturing enterprise shall make cooperation with it.
CQC classifies the manufacturing enterprises into 4 categories - A, B, C and D.
Quality information that is based to classify the manufacturing enterprises shall at least
include the following aspects.
(1) results of factory inspection (including the initial factory inspection and
after-certification follow-up inspection);
(2) results of sample test and / or supervision sampling test (including type test,
production on-site sampling or market sampling, etc.);
(3) inspection results of national-level or provincial-level sampling, CCC special
sampling, etc.;
(4) the cooperation conditions of CLIENT, producers (manufacturers) and
manufacturing enterprises for after-certification supervision;
(5) judicial decision, arbitration of complaint and appeal, media exposure, quality
information feedback of consumers, etc.;
(6) quality conditions of the certification products;
(7) other information.
Classification principles of manufacturing enterprises are shown in following table.
Table 1 Classification principles of manufacturing enterprises
Category Classification principles
Category B enterprises provide CQC with compliance documents. CQC performs
comprehensive risk evaluation of the collected quality information and the documents
provided by Category B enterprises. Then CQC determines the classification result. The
evaluation contents include at least following aspects.
1. Factory inspection. Initial factory inspection / after-certification follow-up inspec...