| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| CEL 042-2020 | English | 839 |
Add to Cart
|
4 days [Need to translate]
|
Low ambient temperature air source heat pump (chilled water) unit energy efficiency label - Implementation rules
| |
CEL 042-2020
|
Standard similar to CEL 042-2020
Basic data | Standard ID | CEL 042-2020 (CEL042-2020) | | Description (Translated English) | Low ambient temperature air source heat pump (chilled water) unit energy efficiency label -- Implementation rules | | Sector / Industry | Chinese Industry Standard | | Word Count Estimation | 21,259 | | Summary | This standard is applicable to wind-water type low ambient temperature air source heat pump (cold water) units driven by motors and operating at low ambient temperature, low ambient temperature air source heat pump water heaters for heating, low temperature commercial or industrial use for heating and Similar purpose heat pump water heater. Not applicable to low ambient temperature air source multi-unit air conditioning units and air-to-air type low ambient temperature air source heat pump units. | CEL042-2020: Low ambient temperature air source heat pump (chilled water) unit energy efficiency label - Implementation rules
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Low ambient temperature air source heat pump (chilled water) unit energy efficiency label-Implementation rules
Low ambient temperature air source heat pump (cold water) unit
Energy efficiency label implementation rules
1 General
1.1 These rules are formulated in accordance with the "Energy Efficiency Label Management Measures" (hereinafter referred to as "Measures").
1.2 This rule applies to the air-water type which is driven by a motor and operates at a low ambient temperature
Low ambient temperature air source heat pump (cold water) unit, low ambient temperature air source for heating
Heat pump water heaters, low-temperature commercial or industrial heat pumps for heating and similar purposes
The use, filing and announcement of the energy efficiency label (hereinafter referred to as the logo) of the machine (hereinafter referred to as the unit).
Not applicable to low ambient temperature air source multi-unit air conditioning units and air-to-air type low ambient temperature air source heat pump units.
2 Logo style and specifications
2.1 The logo is a blue and white background color logo with a length of 109 mm and a width of 66 mm.
2.2 The name of the label is. China Energy Efficiency Label (English name is CHINA ENERGY
LABEL), including the following.
(1) The name (or abbreviation) of the producer;
(2) Product specifications and models;
(3) Energy efficiency rating;
(4) Performance coefficient of integrated heating load (W/W);
(5) Heating performance coefficient (W/W);
(6) Heating capacity (kW or W);
(7) The total electric power consumed by heat pump heating (kW or W);
(8) Rated outlet temperature (℃);
(9) The mandatory national standard number of energy efficiency;
(10) Energy efficiency information code;
(11) Energy efficiency "leader" information (only for products included in the national energy efficiency "leader" catalog).
2.3 An example of the logo style is shown in Annex 1, which can be downloaded from the "China Energy Efficiency Label Network".
3 Energy efficiency testing
3.1 Heating performance coefficient, heating integrated partial load performance coefficient, heating capacity and heat pump
The detection method of energy consumption performance related parameters such as total electric power consumed by heating should be based on
The currently valid version of GB 37480.
3.2 "Low ambient temperature air source heat pump (chilled water) unit energy efficiency test report"
The format of the test report (hereinafter referred to as the test report) is shown in Attachment 2, which can be downloaded from the "China Energy Efficiency Marking Network".
3.3 Producers or importers can use their own testing laboratories, or entrust
A qualified third-party inspection and testing institution shall test the product and shall
The mandatory national standard for source efficiency determines the product energy efficiency rating.
Producers or importers who use their own testing laboratories to determine energy efficiency grades should
Ensure that its testing laboratory is equipped to perform testing in accordance with mandatory national standards for energy efficiency
Ability, and encourage it to obtain recognition from national accreditation bodies.
3.4 For testing with its own testing laboratory, laboratory testing capabilities should be provided
Certification materials (including laboratory personnel capabilities, equipment capabilities and testing management specifications),
If it has been approved by the national accreditation body, a copy of the corresponding accreditation certificate should also be provided;
Where a third-party inspection and testing agency is used for testing, the inspection and testing agency ’s
Copy of qualification certificate.
Authorized institutions should be responsible for the energy efficiency labels and product energy efficiency used by producers and importers.
Check the inspection report.
4 Identification of identification information
4.1 Producer refers to the owner or user of a product brand that is legally responsible for product quality.
4.2 The specification and model should be consistent with the label on the nameplate.
4.3 Energy efficiency rating, heating integrated partial load performance coefficient, heating performance coefficient,
Heat, rated outlet temperature and total electric power consumed by heat pump heating should be based on GB 37480
The current valid version and test report are determined. Integrated heating part marked with energy efficiency label
The load performance coefficient and heating performance coefficient should not exceed the value range of the corresponding energy efficiency level.
4.4 The mandatory national standard for energy efficiency refers to the currently valid version of GB 37480.
4.5 The manufacturer or importer directly generates the product energy efficiency information code from the identification information system when filing.
4.6 Products listed in the national energy efficiency "leader" catalog should be marked with energy efficiency "leader" information.
5 Printing, applying and displaying the logo
5.1 Every unit (set) that is shipped or imported should be marked.
5.2 The producer or importer prints its own logo and is responsible for the quality of the print.
5.3 The logo shall be printed on coated paper of 80 grams and above.
5.4 The label should be applied on the obvious part of the front of the outdoor unit of the unit, and on the product packaging
It is explained in the above or instruction manual. If the products are traded through online commodities, they should also
The corresponding logo should be displayed in a prominent position on the main page of product information display.
5.5 The mark applied to the unit shall comply with the provisions of Article 2 of these Rules, the pattern,
Text and colors cannot be changed. The marking specifications can be scaled up on the basis of the provisions of Article 2.1 of this rule.
5.6 On the main page of product packaging, instruction manuals, online transaction product information display and
The energy efficiency logo used in advertising can be scaled up or down in proportion to the paper version.
Printed in monochrome, the text in the logo should be legible.
5.7 Products listed in the national energy efficiency "leader" category will be shipped 30 days after the catalog is published
Products should use a logo that contains information on the "leader" of energy efficiency.
6 Filing of the logo
6.1 The producer or importer shall file one by one according to the product specifications and models. Specifications and models
The same but the same structure, the comprehensive load performance coefficient of heating, the heating performance coefficient, the
Products with the same total electric power and rated outlet water temperature for heat and heat pump heating are on record
Can no longer submit the test report.
6.2 The producer and importer should apply to the authorized institution for filing, and at the same time
"Effective Marking Network" fill in the "Environmental Efficiency Marking Record Form for Low Ambient Air Source Heat Pump (Chilled Water) Units"
(See Annex 3) and other relevant filing materials as stipulated in the Measures.
The record materials should be true, accurate and complete.
6.3 When the content of the product logo changes, it shall be filed with the authorized institution again.
6.4 For those who do not meet the requirements of Article 6.2 of this rule, the authorized institution shall notify the producer or
The importer will promptly add materials or replace the used logo.
6.5 Materials in foreign languages shall be accompanied by Chinese translations, and the Chinese text shall prevail.
7 Logo announcement
7.1 The authorized institution shall verify and revoke the producer or importer of products with substandard energy efficiency
Relevant filing information and make timely announcements.
7.2 The authorized institution shall establish a product information database and report to producers, consumers and supervisors.
Management departments and others provide product information query service, verify and announce the verification and supervision and inspection of signs in a timely manner.
7.3 Enterprises, consumers and other relevant parties can make complaints and report violations of labeling in the following ways.
|