Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169760 (Nov 21, 2020)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

CB 1146.8-1996

Chinese Standard: 'CB 1146.8-1996'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
CB 1146.8-1996English70 Add to Cart 0--10 minutes. Auto immediate delivery. Ship equipment environmental test and engineering guidance - Tilt and sway CB 1146.8-1996

  In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  

BASIC DATA
Standard ID CB 1146.8-1996 (CB1146.8-1996)
Description (Translated English) Ship equipment environmental test and engineering guidance - Tilt and sway
Sector / Industry Shipping Industry Standard
Classification of Chinese Standard U08
Classification of International Standard 47.020.01
Word Count Estimation 6,642
Date of Issue 1996-12-23
Date of Implementation 1997-06-01
Older Standard (superseded by this standard) CB 1146.8-85
Drafting Organization China Shipbuilding Industry Corporation seven courtyard standardization research room
Administrative Organization Marine environmental conditions
Summary This standard specifies the test conditions, severity, test interruption, test procedures, eligibility criteria for the tilting and swing test of the ship's equipment, and provides guidance on the engineering. This standard is applicable to environmental tests that evaluate the adaptability and structural integrity of ship equipment under specified tilting and swing conditions.

CB 1146.8-96
CB
MINISTERIAL STANDARD OF
CHINA SHIPBUILDING CORPORATION
U 08
CB 1146.8-96
Ship equipment environmental test and
engineering guidance - Tilt and sway
舰船设备环境试验与工作导则 倾斜和摇摆
ISSUED ON. DECEMBER 23, 1996
IMPLEMENTED ON. JUNE 01, 1997
Issued by. China Shipbuilding Corporation
CB 1146.8-96
Table of Contents
1 Subject content and application scope ... 3 
2 Normative references ... 3 
3 Test conditions ... 3 
4 Severity level ... 4 
5 Test procedure ... 5 
6 Interruption treatment for testing ... 6 
7 Qualification criteria ... 6 
8 Test record and documents ... 6 
9 Engineering guidance ... 6 
10 Specified detail rules when quoting this Standard ... 6 
Appendix A ... 8 
Additional information. ... 9 
CB 1146.8-96
Ship equipment environmental test and engineering
guidance - Tilt and sway
[Translator’s note. lateral tilt = swaying; longitudinal tilt = surging; lateral sway = rolling;
longitudinal sway = pitching]
1 Subject content and application scope
This Standard specifies the test conditions, severity level, interruption treatment for
testing, test procedure, and qualification criteria; it also provides the relevant work
guidance.
This Standard applies to evaluating the ship equipment environmental test of working
adaptability and structure integrity under the specified conditions of tilt and sway.
2 Normative references
CB 1146.1-96 1480 Environmental tests and work guidance of naval equipment –
General
GJB 150.23-91 Laboratory environmental test methods for military materiel – Tilt and
sway test
3 Test conditions
3.1 Sway test bench
When the tilt test is done on the tilt test bench, the test bench shall stably stay at the
specified place under the maximum test load, it must not occur obvious waggle and
drift.
At least, the tilt test bench shall be able to simulate a form of ship’s tilt, which generally
is lateral-sway and (or) longitudinal-sway. The amplitude and period of tilt shall be
able to be adjusted casually and meet the following requirements.
a. the waveform of tilt shall be the continuously smooth sine wave; the distortion
of waveform shall be less than 15%;
b. the tolerance of tilt amplitude is ± 5%;
c. the tolerance of tilt period is ± 5%.
CB 1146.8-96
provisions of relevant standard or technical documents.
5.4 Final detection
Detect the sample’s appearance, mechanical, and electrical properties according to
the provisions of relevant standard or technical documents.
6 Interruption treatment for testing
When there is interruption during testing, if there is no other provision, the treatment
shall generally be done according to provision 4.6 in CB 1146.1. If using other method,
it shall be declared in the test report.
7 Qualification criteria
7.1 After the sample is test for tilt and sway, if there is one of the following conditions,
it is deemed as unqualified.
a. the structure is jammed or destroyed;
b. the temperature rising of the bearing is over allowable value;
c. malfunction or faulty contact or sluggish;
d. deviation value of performance parameter index is beyond the allowable
limitation of product standard or technical documents;
e. other criteria that are specified by the product standard or technical documents.
7.2 For other problems of the sample, if there are not rules specified in the product
standard or technical documents, the chief testing engineer shall determine.
8 Test record and documents
The test documentation shall comfort to the relevant provisions of Chapter 8 in CB
1146.1.
9 Engineering guidance
The engineering guidance is referred in Appendix A (reference).
10 Specified detail rules when quoting this Standard
a. the variety, form and sequence of test;
CB 1146.8-96
Appendix A
(Reference)
Engineering guidance of ship equipment tilt and sway environmental test
A1 Introduction
The tilt environment stated in this Standard, including longitudinal tilt and lateral tilt, is
generally resulted from the marine casualty, controlling, unevenly loading and wind.
The sway environment stated in this Standard, including longitudinal sway, lateral
sway, yawing, and their mutual coupling movement, is generally resulted from the
external force such as wind, wave and so on.
Tilt and sway are a kind of basic environment that is withstood by all equipment
installed on ship. The purpose of this Standard is to provide a method that can
simulate that, in laboratory, the product is effected by tilt and sway environment, rather
than reappearing the real tilt and sway environment.
A2 Environmental effects
Tilt and sway will affect some properties of ship equipment. The main influences are
as following.
a. the destroy of the balance for the original forces in the equipment system;
b. the change of bearing’s stress conditions;
c. the deterioration of bearing’s lubricating conditions;
d. the malfunction that is resulted from the change of internal free surface place;
e. leakage of internal liquid.
Related standard:   CB 1146.9-1996
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2020