LY/T 1654-2006 English PDF
Basic dataStandard ID: LY/T 1654-2006 (LY/T1654-2006)Description (Translated English): Reconstituted decorative veneer Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B70 Classification of International Standard: 79.060 Word Count Estimation: 14,189 Date of Issue: 2006-08-31 Date of Implementation: 2006-12-01 Quoted Standard: GB/T 2828.1-2003; GB/T 17657-1999; GB 18580-2001; GB/T 19367.1-2003; LY/T 1655-2006 Regulation (derived from): ?State Forestry Administration Announcement 2010 No.1 Issuing agency(ies): State Forestry Administration Summary: This standard specifies the reorganization of decorative veneer of terms and definitions, classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage. This standard applies to reorganization decorative material after slicing, peeling or cutting processing of decorative veneer. This standard does not apply to integrated board. LY/T 1654-2006: Reconstituted decorative veneer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Reconstituted decorative veneer ICS 79.060 B70 People's Republic of China Forestry Industry Standard Reorganized decorative veneer Released on.2006-08-31 Implementation of.2006-12-01 State Forestry Administration released ForewordAppendix A of this standard is an informative annex. This standard is proposed and managed by the National Standardization Technical Committee for Wood-based Panels. This standard is drafted by. Nanjing Forestry University. Participated in the drafting of this standard. Weide Wood (Suzhou) Co., Ltd., Dehua Building Materials (Suzhou) Co., Ltd., Chinese Academy of Forestry Institute of Wood Industry, School of Materials Engineering, Fujian Agriculture and Forestry University. The main drafters of this standard. Zhang Qinli, Zeng Zhigao, Zhuang Qicheng, Wang Jinlin, Huang Yongnan, Hou Lun Deng, Yi Yuhua, Li Chunsheng. This standard was first published. This standard is interpreted by the National Standardization Technical Committee for Wood-based Panels. Reorganized decorative veneer1 ScopeThis standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, and packaging, marking, transportation, and Storage, etc. This standard is applicable to decorative veneers made by reshaping, cutting or sawing. This standard does not apply to integrated boards.2 Normative referencesThe terms in the following documents are incorporated by this standard into the terms of this standard. All dated references, all subsequent Modifications (not including errata content) or revisions do not apply to this standard, however, research that encourages agreements based on this standard is No, the latest version of these files can be used. For undated references, the latest edition applies to this standard. GB/T 2828.1-2003 - Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch inspections by Retrieving Quality of Acceptance (AQL) Plan (ISO 2859-1.1999, IDT) GB/T 17657-1999 Test method for physical and chemical properties of wood-based panels and veneered panels GB 18580-2001 Indoor decoration materials, artificial release boards and their products, formaldehyde release limit GB/T 19367.1-2003 Determination of thickness, width and length of panel LY/T 1655-2006 Reconstructed decorative materials3 Terms and definitionsThe terms and definitions established by LY/T 1655-2006 and the following terms apply to this standard. 3.1 A decorative veneer made by reshaping, cutting, or sawing. 3.2 The patterns are arranged in approximately parallel lines, similar to the reworked decorative veneers of the wood-cut pattern. 3.3 The pattern is in a "V" shape or a "landscape" pattern, similar to a composite decorative veneer with a wood string cut pattern. 3.4 In addition to the cut and string-cut pattern reconstituted decorative veneers, it is similar to the various decorative patterns of various decorative patterns on the wood surface. 3.5 Reorganized decorative veneer with artistic pattern. 3.6 The small veneer on the surface of the reconstituted decorative veneer falls off to expose the adhesive layer. 3.7 Partial surface discoloration of the reconstituted decorative veneer caused during processing. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1654-2006_English be delivered?Answer: Upon your order, we will start to translate LY/T 1654-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1654-2006_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1654-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
