LY/T 1634-2005 English PDFUS$769.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. LY/T 1634-2005: Technical programs of the raising management on Northeast wapiti
Basic dataStandard ID: LY/T 1634-2005 (LY/T1634-2005)Description (Translated English): Technical programs of the raising management on Northeast wapiti Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B44 Classification of International Standard: 65.020.30 Word Count Estimation: 22,214 Date of Issue: 2005-08-16 Date of Implementation: 2005-12-01 Summary: This standard specifies the adult male deer, doe, Fawn feeding and management techniques, disease prevention and health, herd structure and turnover, deer farm construction, file management. This standard applies to captivity in northern China 's northeastern state of red deer farming. LY/T 1634-2005: Technical programs of the raising management on Northeast wapiti---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Technical programs of the raising management on Northeast wapiti ICS 65.020.30 B44 People's Republic of China Forestry Industry Standard Northeast Red Deer Breeding Technical Regulations Released on.2005-08-16 Implementation of.2005-12-01 State Forestry Administration released ContentForeword I 1 Scope 1 2 Normative references 1 3 Deer Farm Construction 1 4 adult male deer breeding management 2 5 Adult Doe Breeding Management 7 6 deer breeding management 8 7 Health and Epidemic Prevention 11 8 Deer group structure and turnover 12 9 File Management 12 Appendix A (informative appendix) Common Production Statistics Form 13ForewordAppendix A of this standard is an informative annex. This standard was proposed and managed by the Heilongjiang Provincial Wildlife Research Institute. This standard was drafted. Heilongjiang Provincial Wildlife Research Institute. The main drafters of this standard. Yan Yuwen, Ge Dongning, Sun Hongyu, Wang Chunhua. This standard was first published. Northeast Red Deer Breeding Technical Regulations1 ScopeThis standard specifies the feeding management techniques, epidemic prevention, deer group structure and turnover, deer construction and archives of adult male deer, female deer and deer. management. This standard is applicable to the northeast red deer breeding in the captive state of northern China.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB 5749 Sanitary Standard for Drinking Water GB 6936 Northeast Red Deer Breed GB 13078 Feed Hygiene Standard GB 16548 Livestock and poultry disease carcass and its products harmless treatment procedures GB 16549 Livestock and poultry production quarantine specifications HJ/T 81 Technical Specifications for Pollution Prevention and Control of Livestock Breeding Industry NY27-1986 antler processing method and quality identification3 Deer construction3.1 Site selection 3.1.1 Geographic conditions Should choose the place where the terrain is high and dry, the drainage is convenient, and the wind is sheltered from the sun. The terrain is flat and slightly inclined to the south or southeast. The slope of the ground is 3°. ～5° is appropriate, the maximum slope should not exceed 20°, should be higher than the highest flood level in the local history, and the groundwater level should be below 2m. Soil quality Solid, good water permeability. 3.1.2 Water source The water source is sufficient and the water quality complies with the provisions of GB 5749. 3.1.3 Epidemic prevention Deer farms should be located in non-animal areas. The deer farm should be more than 500m away from the residential area and located at the downwind of the residential area. The terrain should be lower than the residents. District; more than 300m from the main line of railways and highways; more than 1000m from the marshes. 3.2 Deer ring construction 3.2.1 Building area a) The area occupied by the adult male deer in each shed is not less than 4.2m2, and the available playground area per head is not less than 21m2; b) The area occupied by the female deer shed is not less than 5.2m2, and the area of the available playground is not less than 26m2; c) The area occupied by the deer shed is not less than 4.2m2, and the area of the available playground is not less than 15m2. 3.2.2 Structure 3.2.2.1 Deer House The deer house is a three-walled, brick-concrete structure with a wall height of 2.3m and a wall thickness of 37cm. The herringbone canopy has no walls in front; the eaves are 2.1m from the ground. ~ 2.2m; bed in the deer house with hard wood, the bed should have a slope of 3 ° ~ 5 °. 3.2.2.2 Braille guardrail ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1634-2005_English be delivered?Answer: Upon your order, we will start to translate LY/T 1634-2005_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1634-2005_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1634-2005_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
