LY/T 1568-2016 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1568-2016: Finger tenoner
Status: Valid

LY/T 1568: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 1568-2016	229	Add to Cart	3 days	Finger tenoner	Valid
LY/T 1568-1999	359	Add to Cart	3 days	Finger torernor	Obsolete

Similar standards

LY/T 3022   LY/T 1346   SL 470   LY/T 1286   LY/T 1031   LY/T 1011   

Basic data

Standard ID: LY/T 1568-2016 (LY/T1568-2016)
Description (Translated English): Finger tenoner
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B97
Word Count Estimation: 10,135
Date of Issue: 2016-07-27
Date of Implementation: 2016-12-01
Older Standard (superseded by this standard): LY/T 1568-1999
Regulation (derived from): State Forestry Administration Announcement No.17 of 2016; Industry Standard Announcement No.16 of 2016 (No.204)
Issuing agency(ies): State Forestry Administration

LY/T 1568-2016: Finger tenoner

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Refers to the tenon tenon) ICS 79.120.99 B97 People's Republic of China Forestry Industry Standard Replacing LY/T 1568-1999 Finger smashing machine Fingertenoner Released on.2016-07-27 Implementation of.2016-12-01 State Forestry Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. Publication of this document The organization is not responsible for identifying these patents. This standard is a revision of LY/T 1568-1999. The main difference between this standard and LY/T 1568-1999 as follows. --- Modified the scope; ---Modified normative references; ---Modified the main parameters; --- Combine Chapters 4 and 5 of the original standard into the requirements of Chapter 5, and modify the geometric accuracy, work accuracy, dry run test, load test Part; --- Added the relevant provisions of Chapter 7, Marking, Packaging and Storage. This standard is proposed by the National Wood-based Panel Machinery Standardization Technical Committee (SAC/TC66) and is under the jurisdiction. This standard was drafted. Northeast Forestry University, state-owned Songjiang plywood factory. The main drafters of this standard. Hua Jun, Zhang Shaoqun, Chen Guangwei, Liu Cheng, Shi Tiezhen. This standard replaces the previous versions of the standard as follows. ---LY/T 1568-1999. Finger smashing machine

1 Scope

This standard specifies the main parameters, requirements, inspection rules and signs, packaging and storage of the fingerling machine. This standard is applicable to the finger hoeing machine (hereinafter referred to as the smashing machine) for general purpose wood products.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB/T 3766-2015 General rules and safety requirements for hydraulic drive systems and their components GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions GB/T 7932 pneumatic system general technical conditions GB/T 13306 signage General technical conditions for GB/T 13384 mechanical and electrical product packaging General technical conditions for GB/T 18262 wood-based panel machinery GB/T 18514 wood-based panel machinery safety rules GB/T 21680 woodworking circular saw blade size JB/T 9953 Woodworking Machine Noise Acoustic (Pressure) Level Measurement Method JB/T 10211 woodworking carbide single-piece finger joint milling cutter

3 sketch

The schematic diagram of the fingerprint machine is shown in Figure 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1568-2016_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1568-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1568-2016_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1568-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version LY/T 1568-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1568-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.