GB/T 40118-2021 English PDF

US$344.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40118-2021: Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 40118-2021	344	Add to Cart	4 days	Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs	Valid

Similar standards

GB/T 42613   GB/T 39333   GB/T 37677   GB/T 14910   GB/T 40116   

Basic data

Standard ID: GB/T 40118-2021 (GB/T40118-2021)
Description (Translated English): Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J12
Word Count Estimation: 18,139
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 40118-2021: Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plain bearings-Testing under conditions of hydrodynamic and mixed lubrication in test rigs ICS 21.100.10 CCSJ12 National Standards of People's Republic of China Sliding bearing hydrodynamic pressure and mixed lubrication conditions Bench test (ISO 6281.2020, IDT) Released on 2021-05-21 2021-12-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standard Documents" Drafting. The translation method used in this document is equivalent to ISO 6281.2020 "Dynamic Pressure and Mixed Lubrication Condition Bench Test for Sliding Bearings. The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows. ---GB/T 2889 (all parts) Plain bearing terms, definitions, classifications and symbols [ISO 4378 (all parts)] This document was proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Sliding Bearing Standardization Technical Committee (SAC/TC236). Drafting organizations of this document. China National Machinery Productivity Promotion Center, Zhejiang Zhongda Precision Components Co., Ltd., Taiyuan University of Science and Technology, Zhejiang Shuangfei Oilless Bearing Co., Ltd., Zhejiang Changsheng Sliding Bearing Co., Ltd., Jiaxing Meiteer Baoxin Machinery Industry Co., Ltd., Jiashan San Fu Sliding Bearing Co., Ltd. This document is interpreted by the National Technical Committee for Standardization of Sliding Bearings. Sliding bearing hydrodynamic pressure and mixed lubrication conditions Bench test

1 Scope

This document specifies the radial sliding bearing bench test under hydrodynamic pressure or mixed lubrication conditions during the development of bearings and/or materials Claim. This document is applicable to the performance test of single-layer and multi-layer radial sliding bearings under static and dynamic loading. This document is not applicable to the dynamic performance test of the radial bearing lubricating film required for the calculation of the vibration and stability of the turbine rotor. Note. To conduct tests on the basis of this document, more detailed test procedures need to be established.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. ISO 4378 (all parts) Plain bearing terms, definitions, classifications and symbols (Plainbearings-Terms, definitions, classificationandsymbols)

3 Terms and definitions

ISO 4378 (all parts) defined and the following terms and definitions apply to this document. 3.1 Wearrate The amount of wear per unit time. 3.2 Wear intensity The ratio of the amount of wear to the length or volume of wear.

4 symbols

The following symbols apply to this document, see Table 1. Table 1 Symbols Symbol description unit a Cycle time s B Bearing width mm F bearing load N ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 40118-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 40118-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 40118-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 40118-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.