GB/T 33096-2025 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33096-2025	RFQ	ASK	3 days	(General specification of elastic rubber parts for wind turbines)	Valid
GB/T 33096-2016	439	Add to Cart	4 days	General technical specification for wind power rubber to metal parts	Valid

Basic data

Standard ID: GB/T 33096-2025 (GB/T33096-2025)
Description (Translated English): (General specification of elastic rubber parts for wind turbines)
Sector / Industry: National Standard (Recommended)
Date of Implementation: 2026-05-01
Older Standard (superseded by this standard): GB/T 33096-2016
Issuing agency(ies): State Administration for Market Regulation; Standardization Administration of China

GB/T 33096-2016: General technical specification for wind power rubber to metal parts

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General technical specification for wind power rubber to metal parts ICS 83.140.99 G47 National Standards of People's Republic of China Rubber elastic element for wind turbine General technical conditions 2016-10-13 released 2017-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 symbols, classification and coordinate system definition 1 3.1 Symbol 1 3.2 Classification 2 3.3 Definition of coordinate system 3 4 Requirements 5 4.1 Size and appearance 5 4.2 Properties of rubber materials 5 4.3 Metal materials 6 4.4 Product performance 6 5 Test Methods 7 5.1 size and appearance 7 5.2 Rubber material properties 8 5.3 Metal materials 8 5.4 Product performance 8

6 inspection rules

6.1 Factory inspection 10 6.2 Type Inspection 10 7 Marking, packaging, storage and transportation 12 7.1 mark 12 7.2 Packaging 12 7.3 Storage 12 7.4 Transport 12 Appendix A (informative) Common Rubber Elastic Element Type 13 Appendix B (Normative Appendix) Test Method for Stiffness of Rubber Elastic Elements

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the China Petroleum and Chemical Industry Association. This standard by the National Rubber and Rubber Products Standardization Technical Committee Rubber Sundry Sub-Technical Committee (SAC/TC35/SC7) Go back. The drafting of this standard unit. Zhuzhou era of new materials Technology Co., Ltd., China Zhuzhou Electric Locomotive Research Institute Co., Ltd. Wind power Department, Xinjiang Goldwind Technology Co., Ltd., Shanghai Electric Wind Power Equipment Co., Ltd., Guodian United Power Technology Co., Ltd. The main drafters of this standard. Lin Sheng, Yue Tao, Zhao Ping, Li Qi, Ni Li, Zhou Shumei, Hu Weihui, Fang Kejuan, Qin Zhongzheng, Rong Jigang, Cheng Haitao. Rubber elastic element for wind turbine General technical conditions

1 Scope

This standard specifies the symbol, classification and definition of the rubber elastic element of the wind turbine (hereinafter referred to as "rubber elastic element"), Requirements, test methods, inspection rules, signs, packaging, storage and transportation. This standard applies to.200kW and above the horizontal axis wind turbine gearbox, generators, cabin hood, control cabinet, etc. from the use of Cushioning, vibration effect of rubber elastic components. Horizontal axis wind turbine generating units with power less than.200kW and vertical axis wind turbines Group rubber elastic elements can refer to the implementation. This standard does not apply to polyurethane and sealed rubber products. Note. See Appendix A for common types of rubber elastic elements.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Metallic materials - Tensile testing - Part 1. Test methods for room temperature GB/T GB/T 528 vulcanized rubber or thermoplastic rubber tensile stress and strain properties of the determination GB/T 529 Determination of tear strength of vulcanized rubber or thermoplastic rubber (pants, right angle and crescent specimens) GB/T 531.1 vulcanized rubber or thermoplastic rubber press hardness test method Part 1. Shore hardness tester (Shore hardness) Shapes and position tolerances Not included Tolerance values GB/T 1184-1996 GB/T 1681 Determination of resilience of vulcanized rubber GB/T 1682-2014 vulcanized rubber - Determination of low - temperature brittleness - Single - sample method GB/T 1804-2000 General tolerances Tolerances of linear and angular dimensions without tolerances Rubber - Physical test methods - General procedures for the preparation and adjustment of specimens GB/T GB/T 3512 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat resistance test Rubber products - Tolerances - Part 1. Dimensional tolerances GB/T 3672.1-2002 Rubber products - Tolerances - Part 2. Geometrical tolerances GB/T 3672.2-2002 GB/T 4336 carbon steel and medium and low alloy steel spark source atomic emission spectrometric method (conventional method) GB/T 7759.1 Determination of compressive permanent deformation of vulcanized rubber or thermoplastic rubber - Part 1. Determination of compressive permanent deformation at ambient temperature and high temperature GB/T 7762 vulcanized rubber or thermoplastic rubber resistant to ozone cracking static tensile test GB/T 9867 Determination of abrasion resistance of vulcanized rubber or thermoplastic rubber (rotary roller type grinding method) GB/T 10125 artificial atmosphere corrosion test salt spray test GB/T 11211 Determination of bond strength of vulcanized rubber or thermoplastic rubber and metal - Two - plate method GB/T Protective coatings for steel structures - Protective coatings for paints and varnishes - Part 6. Laboratory properties GB/T 30790.6-2014 Can test method 3 symbols, classification and coordinate system definition 3.1 symbols Displacement, force amplitude shown in Figure 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33096-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33096-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33096-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33096-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 33096-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 33096-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.