Home   Cart   Quotation   Policy   About-Us
www.ChineseStandard.net
SEARCH

GB/T 33095.1-2016 English PDF

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33095.1-2016: Rubber, unvulcanized -- Measurement of rheological properties using rotorless shear rheometer -- Part 1: Frequency sweep
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 33095.1-2016199 Add to Cart 3 days Rubber, unvulcanized -- Measurement of rheological properties using rotorless shear rheometer -- Part 1: Frequency sweep Valid

Similar standards

GB/T 40720   GB/T 40797   GB/T 35858   GB/T 15340   GB/T 33078   

Basic data

Standard ID: GB/T 33095.1-2016 (GB/T33095.1-2016)
Description (Translated English): Rubber, unvulcanized -- Measurement of rheological properties using rotorless shear rheometer -- Part 1: Frequency sweep
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G40
Classification of International Standard: 83.060
Word Count Estimation: 10,147
Date of Issue: 2016-10-13
Date of Implementation: 2017-05-01
Regulation (derived from): National Standard Notice No.1716 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 33095.1-2016: Rubber, unvulcanized -- Measurement of rheological properties using rotorless shear rheometer -- Part 1: Frequency sweep


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber, unvulcanized - Measurement of rheological properties using rotorless shear rheometer - Part 1. Frequency sweep ICS 83.060 G40 National Standards of People's Republic of China Unvulcanized rubber was measured with a dynamic rotorless rheometer Rheological properties - Part 1. Frequency sweep method Rubber, unvulcanized-Measurement avrheologicalproperties usingrotorlessshearrheometer-Part 1. Frequencysweep 2016-10-13 released 2017-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

GB/T 33095 "non-vulcanized rubber dynamic rotorless rheometer determination of rheological properties" is divided into the following two parts. Part 1. Frequency sweep method; Part 2. Strain gauges. This part is part 1 of GB/T 33095. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section is proposed by the China Petroleum and Chemical Industry Association. This part of the National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35) centralized. This part of the drafting unit. Shanghai Connaught Instrument Co., Ltd., Fengshen Tire Co., Ltd., Guizhou Tire Co., Ltd., three Angle tire Co., Ltd., Guangzhou South China Rubber Tire Co., Ltd., Shenyang Chemical School, Double Star Group Co., Ltd., Beijing rubber Rubber Industry Research and Design Institute, Jiangsu Pearl Instrument Technology Co., Ltd., Shanghai Dejie Instrument Equipment Co., Ltd., Monteeco Instrument Co., Ltd., high Iron Testing Instrument Co., Ltd. The main drafters of this part. Zhang Rong, Ren Shaowen, Liu Yuwan, Feng Ping, Yan Fujiang, Xu Qiuhuan, Chen Yutao, Luo Jiliang, Rui Rui, Hu Xiujun, Guo Fei, Xie Junfang, Li Jing, Bao Dafei, Qin Xiaofeng, Gong Jianming, Yu Fuxi, Chen Ruiyi, Chen Yongdian. Unvulcanized rubber was measured with a dynamic rotorless rheometer Rheological properties - Part 1. Frequency sweep method WARNING. Personnel using this section should have practical experience in formal laboratory work. This section does not address all possible security issues, It is the responsibility of the user to take appropriate safety and health measures and to ensure compliance with the conditions set forth in the relevant national regulations. Note. Some of the operations involved in this section may be used to generate some substances or produce waste and have an adverse effect on the local environment. Develop appropriate documents for the disposal of these substances after use.

1 Scope

This part of GB/T 33095 specifies a method for testing rheological properties of rubbers with dynamic rotorless rheometers - frequency sweep Painting method. This part is suitable for the testing of the rheological properties of raw rubber and compound.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Rubber - Physical test methods - General procedures for the preparation and adjustment of specimens GB/T Natural and synthetic raw rubber samples and their preparation methods GB/T 15340

3 terms and definitions

The following terms and definitions apply to this document. 3.1 Complex torque complextorque S * After applying a sine wave shear strain to the specimen, the peak amplitude of the torque measured by the reaction torque sensor. 3.2 Elastic torque elastictorque S ' The peak amplitude of the torque component in the same phase as the strain is applied after the sine wave shear strain is applied to the specimen. 3.3 Viscous torque viscoustorque S " And the amplitude of the torque component at the 90 ° angle difference of the applied sine wave strain. 3.4 Complex shear modulus complexshearmodulus G * The ratio of shear stress to shear strain, where each term can be expressed in plural. [GB/T 9881-2008, definition 2.88]
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33095.1-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33095.1-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33095.1-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33095.1-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.