GB/T 33086-2016 English PDF

US$119.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33086-2016: Water treatment chemical -- Determination of arsenic and mercury -- Atomic fluorescence spectrometry
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33086-2016	119	Add to Cart	2 days	Water treatment chemical -- Determination of arsenic and mercury -- Atomic fluorescence spectrometry	Valid

Similar standards

GB/T 41330   GB/T 37907   GB/T 37906   GB/T 45386.1   GB/T 45131   

Basic data

Standard ID: GB/T 33086-2016 (GB/T33086-2016)
Description (Translated English): Water treatment chemical -- Determination of arsenic and mercury -- Atomic fluorescence spectrometry
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G76
Classification of International Standard: 13.060.50��71.040.40
Word Count Estimation: 6,677
Date of Issue: 2016-10-13
Date of Implementation: 2017-05-01
Regulation (derived from): National Standard Notice No.1716 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 33086-2016: Water treatment chemical -- Determination of arsenic and mercury -- Atomic fluorescence spectrometry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Water treatment chemical - Determination of arsenic and mercury - Atomic fluorescence spectrometry ICS 13.060.50; 71.040.40 G76 National Standards of People's Republic of China Determination of Arsenic and Mercury in Water Treatment Agents Atomic fluorescence spectrometry Watertreatmentchemical-Determination ofarsenicandmercury- 2016-10-13 released 2017-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the China Petroleum and Chemical Industry Association. This standard is under the jurisdiction of the National Chemical Standardization Technical Committee Water Treatment Substances Technical Committee (SAC/TC63/SC5). The standard drafting unit. water source (Shanghai) Environmental Protection Technology Co., Ltd., CNOOC Tianjin Chemical Research and Design Institute Co., Ltd., Guangzhou special Kind of pressure equipment testing and research institute, Shenzhen prospective testing Co., Ltd., Shenzhen City in the water industry technology Development Co., Ltd., Jiashan Channel water Ling Chemical Co., Ltd., Beijing Hai Guang Instrument Co., Ltd., Zhejiang Shuixin sound detection Limited. The main drafters of this standard. Li Cui'e, Bai Ying, Du Yuhui, Zheng Yajie, Li Runsheng, Shen Liexiang, Li Lin, Yu Fen, Jiao Yu, Liu Haitao, Chen Shuang Determination of Arsenic and Mercury in Water Treatment Agents Atomic fluorescence spectrometry WARNING - The strong acids and bases used in this standard are corrosive and should be avoided when inhaled or in contact with the skin. Splash on the body should be used immediately Wash a lot of water, serious should immediately seek medical attention.

1 Scope

This standard specifies the determination of arsenic and mercury in water treatment agents by atomic fluorescence spectrometry. This standard is applicable to the detection of arsenic and mercury in water treatment agents using atomic fluorescence spectrometry.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 602 Preparation of standard solutions for the determination of impurities in chemical reagents GB/T 6682 Analytical laboratory water specifications and test methods

3 General rules

The reagents used in this standard, unless otherwise specified, use analytical reagents and secondary water as specified in GB/T 6682. The standard solution for the determination of impurities required in the test shall be prepared in accordance with the provisions of GB/T 602 when no other requirements are specified. Determination of arsenic content 4.1 Method Summary After the sample was digested with acid, thiourea was added to reduce the pentavalent arsenic to trivalent arsenic, and further adding boron hydride to further reduction Arsenic, decomposed into atomic arsenic by argon into the quartz atomizer, produces atomic fluorescence under the excitation of the arsenic hollow cathode lamp, The fluorescence intensity in the fixed conditions and the measured solution is proportional to the concentration of arsenic, which measured the arsenic content of the sample. 4.2 Reagents and materials 4.2.1 hydrochloric acid (excellent grade pure). 4.2.2 nitric acid (excellent grade pure). 4.2.3 Hydrochloric acid solution. 1 19. 4.2.4 Nitric acid solution. 1 4. 4.2.5 Thiourea solution. 100 g/L. 4.2.6 Potassium borohydride - sodium hydroxide solution. Weigh 2.0 g of sodium hydroxide and 10.0 g of potassium borohydride in a polyethylene beaker, dissolved with water and Diluted to 1000mL, stored in a brown bottle, the solution is now with the distribution. 4.2.7 arsenic standard stock solution. 0.1mg/mL. 4.2.8 Arsenic standard solution. Remove 10.00mL arsenic standard stock solution in 100mL volumetric flask, add 10.0mL hydrochloric acid, diluted with water ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33086-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33086-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33086-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33086-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.