GB/T 33067-2016 English PDFUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33067-2016: Analysis method of chemical composition for Pd deoxidant catalyst at the middle temperature Status: Valid
Basic dataStandard ID: GB/T 33067-2016 (GB/T33067-2016)Description (Translated English): Analysis method of chemical composition for Pd deoxidant catalyst at the middle temperature Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G74 Classification of International Standard: 71.100.99 Word Count Estimation: 10,186 Date of Issue: 2016-10-13 Date of Implementation: 2017-05-01 Regulation (derived from): National Standard Notice No.1716 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 33067-2016: Analysis method of chemical composition for Pd deoxidant catalyst at the middle temperature---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Analysis method of chemical composition for Pd deoxidant catalyst at the middle temperature ICS 71.100.99 G74 National Standards of People's Republic of China Analysis of chemical composition of medium temperature palladium deoxidizer 2016-10-13 released 2017-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the China Petroleum and Chemical Industry Association. This standard is under the jurisdiction of the National Chemical Standardization Technical Committee Chemical Catalyst Subcommittee (SAC/TC63/SC10). The drafting of this standard. Nanhua Group Research Institute, Shanghai Li was Catalyst Co., Ltd., Shandong Schindler Chemical Group Co., Ltd. The main drafters of this standard. Li Yanrong, Cai Xiangjun, Qiu Ailing, Hu Wenbin. Analysis of chemical composition of medium temperature palladium deoxidizer WARNING - Some of the reagents used in this standard are toxic or corrosive and are partially hazardous. This standard is not disclosed There are potential safety issues that the user should exercise with caution and be responsible for taking appropriate safety and health measures.1 ScopeThis standard specifies the chemical composition analysis method for medium temperature palladium deoxidizer. This standard is applicable to the determination of the mass fraction of palladium, magnesium, iron and chlorine in medium temperature palladium deoxidizer.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Preparation of standard titration solution for GB/T 601 chemical reagents GB/T 602 Preparation of standard solutions for the determination of impurities in chemical reagents Preparation of preparations and preparations for use in the test methods for chemical reagents GB/T 603 GB/T 6003.1 Test sieve technical requirements and testing - Part 1. Wire mesh test screen General rules for sampling of solid chemical products GB/T GB/T 6682 Analytical laboratory water specifications and test methods3 General provisionsThe water used in this standard ion chromatogram is pure water with a resistivity value of not less than 18MΩ · cm, and the other reagents and water used are not indicated When required, refer to the analysis of pure reagents and GB/T 6682 in the provisions of the secondary water. The formulations and articles used in the tests were not indicated Time, according to GB/T 601, GB/T 602 and GB/T 603 requirements.4 sampling4.1 Laboratory samples According to the provisions of GB/T 6679 obtained. 4.2 samples The laboratory samples were mixed evenly and about 40 g was fractionated by a quartile. The pellets were crushed and graded in a porcelain mortar. The samples were passed through a 150 μm test sieve (according to the R40/3 series in GB/T 6003.1), placed in a weighing flask, dried at 105 ° C To constant volume, remove into the dryer, cooling to room temperature, spare. 5 Preparation of sample solution (A) 5.1 Reagent 5.1.1 perchloric acid. excellent grade pure. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33067-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 33067-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33067-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33067-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
