GB/T 32505-2016 English PDF

US$539.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32505-2016: Variable-frequency drive for machine tool
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32505-2016	539	Add to Cart	5 days	Variable-frequency drive for machine tool	Valid

Similar standards

GB/T 39572.1   GB/T 37404   GB/T 31487.3   GB/T 30425   GB/T 32515   

Basic data

Standard ID: GB/T 32505-2016 (GB/T32505-2016)
Description (Translated English): Variable-frequency drive for machine tool
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K46
Classification of International Standard: 29.240.99
Word Count Estimation: 27,239
Date of Issue: 2016-02-24
Date of Implementation: 2016-09-01
Regulation (derived from): National Standard Announcement No
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32505-2016: Variable-frequency drive for machine tool

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Variable-frequency drive for machine tool ICS 29.240.99 K46 National Standards of People's Republic of China Machine-specific frequency control device Issued on. 2016-02-24 2016-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

CONTENTS

Introduction Ⅲ ... 1 Scope 1 ... 2 Normative references 1 ... 3 Terms and definitions 2 ... Category 4 Speed ​​Control Equipment 3 ... 5 Rating 4 ... 5.1 General requirements 4 ... 5.2 input side Rating 4 ... 5.3 Output Rating 4 ... 6 Conditions 4 ... 6.1 Environmental conditions 4 ... 6.2 Electrical conditions 6 ... 7 Technical requirements 7 ... 7.1 7 ... appearance and mechanical properties 7.2 Functional requirements 7 ... 7.3 Safety Requirements 7 ... 7.4 rated output capacity 9 ... 7.5 light load operation 9 ... Within the operating frequency range of technical performance 7.6 9 ... 7.7 Efficiency 10 ... 7.8 The total input power factor 10 ... 7.9 Temperature Rise 10 ... 7.10 noise requirements 11 ... 7.11 output voltage unbalance 11 ... Overload 7.12 11 ... 7.13 Protection 11 ... 7.14 braking capacity 11 ... 7.15 environmental adaptability 12 ... 7.16 Electromagnetic compatibility 12 ... 8 Test 12 ... 8.1 General Requirements 12 ... 8.2 Type tests 12 ... 8.3 factory test 12 ... Special test 8.4 12 ... 8.5 Test item 12 ... 8.6 General inspection 13 ... 8.7 Functional requirements 13 ... 8.8 Electrical Safety 13 ... 8.9 rated output capacity of 13 ... 8.10 light-load test 13 ... 8.11 within the operating frequency range of technical performance measurement 14 ... 8.12 14 ... efficiency measurement 8.13 power factor measurement 14 ... 8.14 temperature rise test 14 ... 8.15 Noise Measurement 14 ... Frequency resolution 8.16 15 ... 8.17 output voltage unbalance 15 ... Overload 8.18 15 ... 8.19 Protection 15 ... 8.20 Determination of braking capacity 15 ... 8.21 15 ... environmental adaptability test 8.22 Electromagnetic compatibility test 16 ... 9 signs, packaging, transportation and storage 16 ... 9.1 mark 16 ... 9.2 Packaging 16 ... 9.3 Transport 16 ... 9.4 Storage 17 ... Appendix A (normative) electromagnetic compatibility requirements 18 ... References 21 ...

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Electrical Equipment Industrial Association. This standard by the national frequency control equipment Standardization Technical Committee (SAC/TC518), CNC system National Standardization Technical Committee (SAC/TC367) centralized. Drafting of this standard. Zhejiang mechanical and electrical products quality inspection, Tianjin Electric Research Institute Co., Ltd., Zhejiang Fu Ling Electric Co., Ltd. hope Senlan Siemens Numerical Control (Nanjing) Co., Ltd., Shanghai STEP Electric Co., Ltd., On Haileinuoer Technology Co., Ltd. Machinery International Engineering Design & Research Institute Co., Ltd., Zhoushan Quality and Technical Supervision and Testing Institute, the state-controlled electricity distribution equipment Quality Supervision and Inspection Center. The main drafters of this standard. Ruan Jianguo, Wu Fenglin, Zhongzhi Bing, Song Ni, Li Cun-Jun, Du Junming, Ye, Chen three leopard, Wang, Zhang, Wang Jianfeng, Han Dongming, Dong Tianshu, Rui Bao-chun. Machine-specific frequency control device

1 Scope

This standard specifies the machine-specific frequency control device design, application conditions, technical requirements, testing and judgment, packaging and storage. This standard applies to the rated input voltage of AC 1kV and below grade, rated input frequency of 50Hz or 60Hz, the output voltage is less than 1kV, the output frequency is less than 600Hz machine with frequency control device (hereinafter referred to as "Speed ​​Device").

2 Normative references

The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3797 Electric Control Equipment GB 4208-2008 shell protection (IP code) GB/T 4798.2-2008 application of electric and electronic products environmental conditions - Part 2. Transport GB/T 4798.3-2007 application of electric and electronic products environmental conditions - Part 3. Stationary use at weather protected locations GB 4824-2013 industrial, scientific and medical (ISM) radio frequency equipment disturbance characteristics - Limits and methods of measurement GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements GB/T 12668.2-2002 speed electric drive systems - Part 2. General requirements for low-voltage adjustable frequency ac power drive systems rating requirements (IEC 61800-2.1998, IDT) EMC requirements and specific test methods. Part 3 GB 12668.3-2012 speed electric drive systems (IEC 61800-3.2004, IDT) GB 12668.501-2013 speed electric drive systems - Part 5-1. Safety requirements for electrical, thermal and energy GB/T 13384-2008 mechanical and electrical products packaging General technical conditions GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques Immunity to conducted disturbances induced field GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test GB/T 17627.1-1998 high voltage test techniques for low voltage equipment Part I. Definitions and testing requirements GB /Z18039.5-2003 electromagnetic compatibility environment in public power supply system frequency conducted electromagnetic environment harassment and signal transmission GB/T 22663-2008 industrial machinery and electrical equipment EMC immunity requirements for machine tools GB 23712-2009 Industry machinery electrical equipment, machine tools EMC emission limits GB/T 30844.1-2014 1kV and the following general frequency control equipment - Part 1. Technical conditions GB/T 30844.2-2014 1kV and the following general frequency control equipment - Part 2. Test methods IEC 61000-2-4.2002 Electromagnetic compatibility (EMC) - Part 2-4. Environmental plant frequency conducted disturbances compatibility level ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32505-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32505-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32505-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32505-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.