GB/T 32483.1-2016 English PDFUS$314.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32483.1-2016: Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps -- Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear Status: Valid
Basic dataStandard ID: GB/T 32483.1-2016 (GB/T32483.1-2016)Description (Translated English): Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps -- Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K74 Classification of International Standard: 29.140.99 Word Count Estimation: 16,167 Date of Issue: 2016-04-25 Date of Implementation: 2016-11-01 Quoted Standard: IEC 60081; IEC 60901; IEC 60921-2004; IEC 60929-2011; IEC 61347-2-3; IEC 61347-2-8 Adopted Standard: IEC 62442-1-2011, IDT Regulation (derived from): National Standard Announcement No Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies a control device - the lamp line and the corresponding fluorescent lamp supporting the work of a total input power of a measurement and calculation method, also provides a lamp control device efficiency calculation method. This standard applies to electrical control devices consisting of control units and lamps only - 50 Hz or 60 Hz AC power supply up to 1 000 V - for lamp circuits. It does not include the requirement to test individual control devices in the production process. This standard specifies the method of measurement of the total input power of all control devices operating with the following fluorescent lamps and the calculation method of the efficiency of the control device: straight fluorescent lamps; single-ended (compact) fluorescent lamps; other ordinary Use of fluorescent lamps. This standard does not apply to: constitute a single lamp control device; controllable GB/T 32483.1-2016: Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps -- Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Energy performance of lamp controlgear.Part 1. Controlgear for fluorescent lamps.Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear ICS 29.140.99 K74 National Standards of People's Republic of China Lamps - Efficiency requirements for control devices - Part 1. Fluorescence Lamp control device control device line total input Measurement of power and control device efficiency Part 1. Controlgearforfluorescentlamps- (IEC 62442-1..2011, IDT) 2016-04-25 release.2016-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 General requirements 3 5 control device - the total input power of the lamp line and the measurement and calculation of the efficiency of the control device 5 Appendix A (normative appendix) Efficiency measuring device 8 Appendix B (informative) Lamps Application of reference ballasts in high frequency operation Reference 12 Figure 1 Light and photoelectric sensor configuration 7 Figure A.1 Inductor control device - Lamp line measurement 8 Figure A.2 AC power supply electronic control device - lamp line measurement 8 Figure A.3 Test device for measuring standby power consumption Figure A.4 Side view of the light output measurement system Figure A.5 Top view of the light output measurement system Table 1 Typical nominal power supply data for some areas 4 ForewordGB/T 32483 "lamp control device efficiency requirements" is divided into three parts. - Part 1. Fluorescent lamp control device control device line total input power and control device efficiency measurement method; - Part 2. Control devices for high-intensity gas discharge lamps (except fluorescent lamps) Method for determining the efficiency of control devices; - Part 3. Low pressure halogen lamps and LED modules - Determination of efficiency of control devices using control means. This part is part 1 of GB/T 32483. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part uses the translation method equivalent to the use of IEC 62442-1..2011 "Lamp control device efficiency requirements Part 1. Fluorescent lamp control equipment Set the control device line total input power and control device efficiency measurement method ". In this part of the normative reference to the international documents have a consistent correspondence between the following documents. GB/T 10682-2010 double-ended fluorescent lamp performance requirements (IEC 60081..2005, NEQ) GB/T 17262-2011 single-ended fluorescent lamp performance requirements (IEC 60901..2007, NEQ) Performance requirements for ballasts for tubular fluorescent lamps (IEC 60921..2004, NEQ) GB/T 14044-2008 GB/T 15144-2009 Performance requirements for AC electronic ballasts for tubular fluorescent lamps (IEC 60929..2006, MOD) GB 19510.9 - Lamp controlgear - Part 9. Particular requirements for ballasts for fluorescent lamps (IEC 61347-2-8..2006, IDT) This part is made by the China Light Industry Federation. This part of the National Lighting Standardization Technical Committee (SAC/TC224) centralized. This part of the drafting unit. Hangzhou Ruiqi Information Technology Co., Ltd., Zhejiang Province Lighting Association, Foshan City, the whole Electric Lighting Co., Ltd., Hangzhou State Hongyan Electric Co., Ltd., Beijing Electric Light Source Research Institute. The main drafters of this part. Zhou Xunsheng, Chen Zhegen, Ke Baiquan, Sun Quanming, Zheng Yanfeng, Duan Yanfang. Lamps - Efficiency requirements for control devices - Part 1. Fluorescence Lamp control device control device line total input Measurement of power and control device efficiency1 ScopeThis part of GB/T 32483 specifies a measure of the total input power of the control unit - the lamp line and the corresponding fluorescent lamp. The calculation method also specifies the calculation method of the efficiency of the lamp control device. This part applies to 50V or 60Hz AC below 1000V The source is powered by only the control device and the lamp consists of an electrical control device - lamp line. It does not include the requirement to test individual control devices during the production process. This section specifies the total input power for all control devices applicable to household and general commercial use, with the following fluorescent lamps Measurement method and control device efficiency calculation method. --- straight tube fluorescent lamp; --- single-ended (compact) fluorescent lamps; --- other general purpose fluorescent lamps. This section does not apply to. - a control device that constitutes a monolithic lamp; Controllable inductive control device; --- Depends on additional optical performance of the fixture.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Performance requirements for IEC 60081 double - ended fluorescent lamps IEC 60901 single - ended fluorescent lamp performance requirements Performance requirements for ballasts for tubular fluorescent lamps IEC 60921..2004 Performance requirements for AC and/or dc electronic control devices for tubular fluorescent lamps IEC 60929..2011 Control devices for IEC 61347-2-3 lamps - Part 2-3. Particular requirements for AC and/or DC electronic control devices for fluorescent lamps IEC 61347-2-8 Lamp controlgear - Part 2-8. Particular requirements for ballasts for fluorescent lamps3 terms and definitionsThe following terms and definitions apply to this document. 3.1 Nominal value nominalvalue To indicate or identify the appropriate approximate value of the element, device, or device. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32483.1-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 32483.1-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32483.1-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32483.1-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
