GB/T 11616-2013 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11616-2013: Synchronous belt drives -- Belts with pitch codes -- MXL, XXL, XL, L, H, XH and XXH -- Synchronous belt dimensions
Status: Valid

GB/T 11616: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 11616-2013	279	Add to Cart	3 days	Synchronous belt drives -- Belts with pitch codes -- MXL, XXL, XL, L, H, XH and XXH -- Synchronous belt dimensions	Valid
GB/T 11616-1989	359	Add to Cart	3 days	Synchronous belts--Dimensions	Obsolete

Similar standards

GB/T 11357   GB/T 10414   GB/T 13487   GB/T 45016   GB/T 11356.2   GB/T 13575.1   

Basic data

Standard ID: GB/T 11616-2013 (GB/T11616-2013)
Description (Translated English): Synchronous belt drives -- Belts with pitch codes -- MXL, XXL, XL, L, H, XH and XXH -- Synchronous belt dimensions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J18
Classification of International Standard: 21.220.10
Word Count Estimation: 12,116
Older Standard (superseded by this standard): GB/T 11616-1989
Adopted Standard: ISO 5296-2012, MOD
Regulation (derived from): National Standards Bulletin No. 25 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the MXL, XXL, XL, L, H, XH and XXH 7 models ladder tooth belt (hereinafter referred to as band) type and markings, size and long measuring tape. This standard applies to general industrial belt drive.

GB/T 11616-2013: Synchronous belt drives -- Belts with pitch codes -- MXL, XXL, XL, L, H, XH and XXH -- Synchronous belt dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Synchronous belt drives. Belts with pitch codes. MXL, XXL, XL, L, H, XH and XXH. Synchronous belt dimensions ICS 21.220.10 J18 National Standards of People's Republic of China Replacing GB/T 11616-1989 Pitch belt drive models MXL, XXL, XL, L, H, XH and XXH Belt size MXL, XXL, XL, L, H, XHandXXH-Synchronousbeltdimensions (ISO 5296.2012, Synchronousbeltdrives-Beltswithpitchcodes- MXL, XXL, XL, L, H, XHandXXH-Metricandinchdimensions, MOD) Issued on. 2014-10-01 2013-12-17 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 11616-1989 "belt size" compared with the GB/T 11616-1989, the main technical changes are as follows. --- Increasing the specific values \u200b\u200bshown and pitch line differential (see Figure 1 and Table 1); --- Increased tape length and bandwidth requirements double sided tape (see 3.3 and Table 6); --- Deleted XXL belt length code (see 1989 edition Table 6). This standard uses redrafted law revision using ISO 5296.2012 "pitch belt drive models MXL, XXL, XL, L, H, XH and XXH belt metric and inch dimensions. " This standard and ISO 5296. compared to 2012 in the structure of the order of the clauses were adjusted. This standard and ISO 5296.2012 is a technical difference. --- Increasing the specific values \u200b\u200bshown and pitch line differential (see Figure 1 and Table 1); --- Added Section line length formula [see equation (1)]. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of the pulley and the belt (SAC/TC428) centralized. This standard was drafted. Ningbo Fulong Synchronous Belt Co., Ltd., machine Productivity Promotion Center, Ningbo Kai Chi Belt Co., Ltd., Ningbo Bei Delivery belt Co., Ltd. Zhejiang Ken Laite Transmission Industry Co., Ltd., Ningbo Jaguar Group Limited. The main drafters of this standard. Lu Hongfen, Panhai Rui, Zhou Yujie, should Jianli The Simultaneous Wang Jinfang, Rong. This standard replaces the standards previously issued as follows. --- GB/T 11616-1989.

3 Dimensions

3.1 Model and pitch Of different pitch, with and seven different models, as shown in Table 1. Table 1 Type of pitch model Pitch Pb pitch line difference ta mm in mm in MXL 2.032 0.080 0.254 0.010 XXL 3.175 0.125 0.254 0.010 XL 5.080 0.200 0.254 0.010 L 9.525 0.375 0.381 0.015 H 12.700 0.500 0.686 0.027 XH 22.225 0.875 1.397 0.055 XXH 31.750 1.250 1.524 0.060 3.2 Toothed Toothed predetermined dimensions Figure 1 and Table 2. Table 2 toothed size Model 2β/(°) S high thick tooth root tooth root fillet radius rr ht tip radius ra mm in mm in mm in mm in MXL 40 1.14 0.045 0.51 0.020 0.13 0.005 0.13 0.005 XXL 50 1.73 0.068 0.76 0.030 0.20 0.008 0.30 0.012 XL 50 2.57 0.101 1.27 0.050 0.38 0.015 0.38 0.015 L 40 4.65 0.183 1.91 0.075 0.51 0.020 0.51 0.020 H 40 6.12 0.241 2.29 0.090 1.02 0.040 1.02 0.040 XH 40 12.57 0.495 6.35 0.250 1.57 0.062 1.19 0.047 XXH 40 19.05 0.750 9.53 0.375 2.29 0.090 1.52 0.060 3.3 with a long In line with a long section chief, said single-sided tooth synchronous belt length and limit deviations are shown in Table 3 and Table 4. With a long single-sided double-sided tooth synchronous belt Toothed belt with the same long, 1.5 times the positive deviation sided tooth belt positive deviation, negative deviation negative deviation sided tooth belt twice. Table 3 XL, L, H, XH, XXH belt length and limit deviations Length code Section line length LP limit deviation Teeth mm in mm in XL LH XH XXH 60 152.4 6 ± 0.41 ± 0.016 30 70 177.8 7 ± 0.41 ± 0.016 35 80 203.2 8 ± 0.41 ± 0.016 40 90 228.6 9 ± 0.41 ± 0.016 45 100 254 10 ± 0.41 ± 0.016 50 110 279.4 11 ± 0.46 ± 0.018 55 120 304.8 12 ± 0.46 ± 0.018 60 124 314.33 12.375 ± 0.46 ± 0.018 33 130 330.20 13.000 ± 0.46 ± 0.018 65 140 355.60 14.000 ± 0.46 ± 0.018 70 150 381.00 15.000 ± 0.46 ± 0.018 75 40 160 406.40 16.000 ± 0.51 ± 0.02 80 170 431.80 17.000 ± 0.51 ± 0.02 85 180 457.20 18.000 ± 0.51 ± 0.02 90 187 476.25 18.750 ± 0.51 ± 0.02 50 190 482.60 19.000 ± 0.51 ± 0.02 95 200 508.00 20.000 ± 0.51 ± 0.02 100 210 533.40 21.000 ± 0.61 ± 0.024 105 56 220 558.80 22.000 ± 0.61 ± 0.024 110 225 571.50 22.500 ± 0.61 ± 0.024 60 230 584.20 23.000 ± 0.61 ± 0.024 115 240 609.60 24.000 ± 0.61 ± 0.024 120 64 48 250 635.00 25.000 ± 0.61 ± 0.024 125 255 647.70 25.500 ± 0.61 ± 0.024 68 260 660.40 26.000 ± 0.61 ± 0.024 130 270 685.80 27.000 ± 0.61 ± 0.024 72 54 285 723.90 28.500 ± 0.61 ± 0.024 76 300 762.00 30.000 ± 0.61 ± 0.024 80 60 322 819.15 32.250 ± 0.66 ± 0.026 86 330 838.20 33.000 ± 0.66 ± 0.026 66 Table 3 (Continued) Length code Section line length LP limit deviation Teeth mm in mm in XL LH XH XXH 345 876.30 34.500 ± 0.66 ± 0.026 92 360 914.40 36.000 ± 0.66 ± 0.026 72 367 933.45 36.750 ± 0.66 ± 0.026 98 390 990.60 39.000 ± 0.66 ± 0.026 104 78 420 1066.80 42.000 ± 0.76 ± 0.03 112 84 450 1143.00 45.000 ± 0.76 ± 0.03 120 90 480 1219.20 48.000 ± 0.76 ± 0.03 128 96 507 1289.05 50.750 ± 0.81 ± 0.032 58 510 1295.40 51.000 ± 0.81 ± 0.032 136 102 540 1371.60 54.000 ± 0.81 ± 0.032 144 108 560 1422.40 56.000 ± 0.81 ± 0.032 64 570 1447.80 57.000 ± 0.81 ± 0.032 114 600 1524.00 60.000 ± 0.81 ± 0.032 160 120 630 1600.20 63.000 ± 0.86 ± 0.034 126 72 660 1676.40 66.000 ± 0.86 ± 0.034 132 700 1778.00 70.000 ± 0.86 ± 0.034 140 80 56 750 1905.00 75.000 ± 0.91 ± 0.036 150 770 1955.80 77.000 ± 0.91 ± 0.036 88 800 2032.00 80.000 ± 0.91 ± 0.036 160 64 840 2133.60 84.000 ± 0.97 ± 0.038 96 850 2159.00 85.000 ± 0.97 ± 0.038 170 900 2286.00 90.000 ± 0.97 ± 0.038 180 72 980 2489.20 98.000 ± 1.02 ± 0.04 112 1000 2540.00 100.000 ± 1.02 ± 0.04 200 80 1100 2794.00 110.000 ± 1.07 ± 0.042 220 1120 2844.80 112.000 ± 1.12 ± 0.044 128 1200 3048.00 120.000 ± 1.12 ± 0.044 96 1250 3175.00 125.000 ± 1.17 ± 0.046 250 1260 3200.40 126.000 ± 1.17 ± 0.046 144 1400 3556.00 140.000 ± 1.22 ± 0.048 280 160 112 1540 3911.60 154.000 ± 1.32 ± 0.052 176 1600 4064.00 160.000 ± 1.32 ± 0.052 128 1700 4318.00 170.000 ± 1.37 ± 0.054 340 1750 4445.00 175.000 ± 1.42 ± 0.056 200 1800 4572.00 180.000 ± 1.42 ± 0.056 144 Table 5 bandwidth and high band (single-sided tooth belt) model With high hs mm in Bandwidth basic dimensions Nominal size mm in Code Bandwidth limit deviation Section line length < 838.2mm (33in) 838.2mm (33in) ~ 1676.4mm (66in) > 1676.4mm (66in) mm in mm in mm in MXL 1.14 0.045 3.2 4.8 6.4 0.12 0.19 0.25 0.5 -0.8 0.02 -0.03 XXL 1.52 0.06 3.2 4.8 6.4 0.12 0.19 0.25 0.5 -0.8 0.02 -0.03 XL 2.30 0.09 6.4 7.9 9.5 0.25 0.31 0.37 0.5 -0.8 0.02 -0.03 - - - - L 3.60 0.14 12.7 19.1 25.4 0.5 0.75 1.00 0.8 -0.8 0.03 -0.03 0.8 -1.3 0.03 -0.05 - - H 4.30 0.17 19.1 25.4 38.1 0.75 1.00 1.5 0.8 -0.8 0.03 -0.03 0.8 -1.3 0.03 -0.05 0.8 -1.3 0.03 -0.05 50.8 2.00 200 1.3 -1.5 0.05 -0.06 1.5 -1.5 0.06 -0.06 1.5 -2 0.06 -0.08 76.2 3.00 300 1.3 -1.5 0.05 -0.06 1.5 -1.5 0.06 -0.06 1.5 -2 0.06 -0.08 XH 11.20 0.44 50.8 76.2 101.6 2.00 3.00 4.00 4.8 -4.8 0.19 -0.19 4.8 -4.8 0.19 -0.19 XXH 15.7 0.62 50.8 76.2 101.6 2.00 3.00 4.00 5.00 - - - - 4.8 -4.8 0.19 -0.19 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11616-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11616-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11616-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11616-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 11616-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11616-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.