GB 46310-2025 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 46310-2025	519	Add to Cart	5 days	Protective clothing - Protective clothing against particles	Valid

Basic data

Standard ID: GB 46310-2025 (GB46310-2025)
Description (Translated English): Protective clothing - Protective clothing against particles
Sector / Industry: National Standard
Classification of Chinese Standard: C73
Classification of International Standard: 13.340.10
Word Count Estimation: 26,229
Date of Issue: 2025-08-29
Date of Implementation: 2026-09-01
Issuing agency(ies): State Administration for Market Regulation; Standardization Administration of China

GB 46310-2025: Protective clothing - Protective clothing against particles

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB46310-2025
ICS 13.340.10 CCSC73 National Standards of the People's Republic of China Protective clothing, particulate protective clothing Published on 2025-08-29 Implemented on 2026-09-01 State Administration for Market Regulation The State Administration for Standardization issued a statement.

Table of Contents

Preface III 1.Scope 1 2 Normative References 1 3.Terms and Definitions 1 4.Classification and Codes 2 5.Technical Requirements 3 6.Test Methods 9. 7.Labeling and information to be provided by the manufacturer 10 Appendix A (Normative) Practical Performance Test Methods for Protective Clothing 11 Appendix B (Normative) Test Method for Inward Leakage Rate of Particulate Protective Clothing 12 Appendix C (Normative) Test Method for Flammability of Fabrics (Single-Nozzle Dynamic Method) 19 References 21

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed and is under the jurisdiction of the Ministry of Emergency Management of the People's Republic of China. Protective clothing, particulate protective clothing 1.Scope This document specifies the classification and codes, technical requirements and markings, and information that manufacturers should provide for particulate protective clothing. It also describes the testing procedures. method. This document applies to protective clothing that reduces the harm of hazardous particulate matter to the wearer. This document does not apply to protective clothing for protection against volatile or penetrating toxic gases or liquids, nor does it apply to protection against ionizing radiation or medical procedures. Protective clothing used during diagnosis and treatment.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. GB/T 3917.3 Textiles - Tear Properties of Fabrics - Part 3.Determination of Tear Strength of Trapezoidal Specimens GB/T 3923.1 Textiles - Tensile properties of fabrics - Part 1.Determination of breaking strength and elongation at break (strip method) GB/T 4744 Test and evaluation of water resistance of textiles - hydrostatic pressure method GB/T 4745-2012 Test and evaluation of water-repellent properties of textiles - Wet test GB/T 11048 Determination of thermal and moisture resistance of textiles under steady-state conditions for physiological comfort (hot plate evaporation method) GB 12014-2019 Protective Clothing - Antistatic Clothing GB/T 12586-2003 Determination of the resistance to flexural breakdown of rubber or plastic coated fabrics GB/T 12704.1 Textiles - Test methods for moisture permeability of fabrics - Part 1.Moisture absorption method GB/T 12903 Terminology for Personal Protective Equipment GB/T 13773.2 Textiles - Tensile properties of seams in fabrics and their products - Part 2.Determination of seam strength by the gripping method GB/T 20654 Test methods for puncture resistance and dynamic tear resistance of mechanical properties materials for protective clothing GB/T 21196.2 Textiles - Martindale Method - Determination of Abrasion Resistance of Fabrics - Part 2.Determination of Specimen Breakage GB/T 21294-2024 Test methods for physical and chemical properties of clothing GB 24539 Protective Clothing - Chemical Protective Clothing ISO 16603.2004 Protective clothing materials—Test method for resistance to penetration by blood and body fluids (synthetic blood test) 3.Terms and Definitions The terms and definitions defined in GB/T 12903 and the following terms and definitions apply to this document. 3.1 particulate matter Solid, liquid, or a mixture of solid and liquid particulate matter suspended in the air. Note. Such as dust, smoke, fog and microorganisms. 3.2 Synthetic blood A mixture of amaranth red dye, surfactant, thickener, inorganic salt, and distilled water has surface tension and viscosity similar to blood and some other substances. body fluid. Note. The synthetic blood in this document does not simulate all the properties of real blood or body fluids, such as color, coagulation, and cytoplasmic content. [Source. ISO 16603.2004, 3.7, modified] 3.3 inward leakage rate Under specified test conditions, the concentration of the simulant leaking into the protective suit from various parts, including the seams, was compared with the concentration simulated in the test environment. The ratio of reagent concentration. Note 1.Ljmn, 82/90.Inward leakage rate expressed as a percentage. 82/90 refers to the number of leakage rate scores, arranged in ascending order, and taking the [number]th score. 82 inward leakage rates, including inward leakage rates for all test actions, sampling points, and protective clothing. Note 2.LS, 8/10.Total inward leakage rate of each protective suit. 8/10 refers to the 8th highest total inward leakage rate of all 10 protective suits, arranged in ascending order. A number. 3.4 Water-vapor resistance The ratio of the water vapor pressure difference between two surfaces of a material to the evaporative heat flux generated per unit area along the gradient direction. Note 1.Moisture resistance determines the potential evaporative heat flux when a stable water vapor pressure gradient exists in a given region. The evaporative heat flux may be generated by diffusion and relativistic forces. Flow formation. Note 2.The unit is kilopascals per square meter per watt (kPa·m2/W). [Source. ISO 11092.2014, 2.2, modified] 3.5 Full-body protective clothing to protect the skin from exposure to or contact with harmful particulate matter in the workplace. 3.6 Full-body protective clothing that protects against harmful biological particulate matter in the workplace, protecting the skin from exposure or contact with it. 3.7 Protect your workplace from radioactive particulate matter in the air, and protect your skin from exposure or contact with radioactive particulate matter. Sexually protective clothing. Note. Positive pressure protective clothing that provides internal ventilation and clean air is not included. 3.8 Full-body protective clothing worn by personnel during emergency rescue and response to protect against harmful particulate matter and protect the skin from exposure or contact with it. 4.Classification and Codes Particulate protective clothing is classified into four categories based on its protective function and application. The classification and codes are as follows. ---Industrial particulate protective clothing, category code. K-1; ---Biological particulate protective clothing, category code. K-2; ---Emergency particulate protective clothing, category code. K-3; ---Radioactive particulate matter protective clothing, category code. K-4. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 46310-2025_English be delivered?

Answer: Upon your order, we will start to translate GB 46310-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 46310-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB 46310-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.