GB 30865.1-2025 English PDFGB 30865.1: Historical versions
Basic dataStandard ID: GB 30865.1-2025 (GB30865.1-2025)Description (Translated English): Hand protection - Protective gloves against cuts and stabs by hand knives - Part 1: Chain-mail gloves and arm guards Sector / Industry: National Standard Classification of Chinese Standard: C73 Classification of International Standard: 13.340.40 Word Count Estimation: 28,264 Date of Issue: 2025-08-29 Date of Implementation: 2026-09-01 Older Standard (superseded by this standard): GB/T 30865.1-2014 Issuing agency(ies): State Administration for Market Regulation; Standardization Administration of China GB 30865.1-2025: Hand protection - Protective gloves against cuts and stabs by hand knives - Part 1: Chain-mail gloves and arm guards---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB30865.1-2025 ICS 13.340.40 CCSC73 National Standards of the People's Republic of China Replaces GB/T 30865.1-2014 Hand protection against cuts and punctures from hand-held knives Gloves Part 1.Metal Chainmail Gloves and Armguards Published on 2025-08-29 Implemented on 2026-09-01 State Administration for Market Regulation The State Administration for Standardization issued a statement. Table of ContentsPreface III Introduction IV 1.Scope 1 2 Normative References 1 3.Terms and Definitions 1 4.Pattern 2 5 Technical Requirements 4 6.Test Methods 7.Identifier 13 8.Information that manufacturers should provide 14 Appendix A (Informative) Glove Size 15 Appendix B (Informative) Hand and Arm Measurements 17 References 22ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. This document is Part 1 of GB 30865 "Hand Protection. Protective Gloves for Cuts and Punctures from Hand-held Knives". GB 30865 has been issued. The following parts were laid out. ---Part 1.Metal Chainmail Gloves and Armguards. This document replaces GB/T 30865.1-2014 "Hand Protection - Protective Gloves for Cuts and Punctures from Hand-held Knives - Part 1.Metallic Gloves". Compared with GB/T 30865.1-2014, the main technical changes in "Chain Armor Gloves and Arm Guards" are as follows, except for structural adjustments and editorial modifications. ---Added terms "metal chainmail," "short-sleeved gloves," "long-sleeved gloves," "extra-long gloves," "short arm guards," and "fixation straps" (see 3.1, 3.3~). 3.6 and 3.8); ---The term "arm guard" has been removed (see 3.2 in the.2014 edition); ---The illustrations and descriptions of the design have been revised (see Chapter 4, Chapter 4 of the.2014 edition); ---The relevant content regarding the styles, technical requirements, and testing methods of rigid and plastic arm guards has been deleted (see Chapter 4 of the.2014 edition). Chapter 6); ---General requirements have been added (see 5.1); ---The harmlessness requirement has been changed (see 5.2, 5.1 in the.2014 version); ---The technical requirements for the scope of protection have been changed (see 5.4, 5.3 in the.2014 edition); ---The sample size for each test method has been changed (see Chapter 6, Chapter 6 of the.2014 edition); ---The accuracy requirements for probe width and length in structural testing have been changed (see 6.3.1.2,.2014 version of 6.3.1.2); ---The test procedures in the structural test have been changed (see 6.3.2,.2014 version 6.3.2); ---The main body logo and the smallest outer packaging logo in the label have been changed (see Chapter 7, Chapter 7 of the.2014 edition); ---The information that manufacturers should provide has been changed (see Chapter 8, Chapter 8 of the.2014 edition). Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed and is under the jurisdiction of the Ministry of Emergency Management of the People's Republic of China. This document was first published in.2014, and this is its first revision.introductionHand protection is an important component of workplace safety. When technical measures cannot completely eliminate hazards and risks in production... In situations involving hazardous factors, wearing hand protective equipment becomes an effective means for workers to defend against external injuries and ensure personal safety and health. Mandatory regulations should be established. The standard for protective gloves against cuts and punctures from hand-held knives specifies the requirements of Article 45 of the "Law of the People's Republic of China on Work Safety". This reflects standardization. GB 30865, "Hand Protection. Protective Gloves for Cuts and Punctures from Hand-held Knives," aims to establish standards for protecting against cuts and punctures from hand-held knives. The basic product requirements for protective gloves for injuries are proposed to consist of the following two parts. ---Part 1.Metal Chainmail Gloves and Armguards. The purpose is to clarify the technical requirements, styles, etc., of metal chainmail gloves and armguards. ---Part 2.Gloves and Armguards Made of Non-Metallic Chainmail Materials. The purpose is to clarify the types of gloves and armguards made of non-metallic chainmail materials. Technical requirements and styles of arm guards. Protective gloves against cuts and punctures from hand-held knives are based on standards set for specific fields, and different products use different materials and technical details. The differences are significant; therefore, based on the differences in core materials, different documents were compiled to collectively constitute my country's protective measures against cuts and stabs from handheld knives. A complete product standard system. In the future, based on industry development, relevant materials will be incorporated in due course to further improve my country's standards for handheld knife cuts and stabs. A standard system for protective gloves to prevent injuries. Hand protection against cuts and punctures from hand-held knives Gloves Part 1.Metal Chainmail Gloves and Armguards 1.Scope This document specifies the technical requirements, markings, and information that manufacturers should provide for metal chainmail gloves and arm guards, and describes the corresponding tests. method. This document applies to chainmail gloves and chainmail arm guards worn for working with hand-held knives. This document does not apply to protective gloves used in situations involving contact with high-speed rotating cutting tools, stamping operations, mixing operations, or live electrical work.2 Normative referencesThe contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. GB/T 22866 Determination of Nickel Emission in Leather Hardware Fittings GB/T 28485 Determination of nickel release from coated jewelry - Wear and corrosion simulation method GB 42298-2022 General Technical Specification for Hand Protection 3.Terms and Definitions The following terms and definitions apply to this document. 3.1 Metal chainmail Mesh armor plates woven from individually welded small metal rings. Note. Hereinafter referred to as "Chain Armor". 3.2 Metal chainmail gloves Gloves made of individually welded small metal rings, designed to protect against cuts and punctures caused by hand-held knives. Note. Hereinafter referred to as "gloves". 3.3 Short-cuff gloves Made of individually welded small metal rings, it provides protection for cuts and punctures to the hands and wrists caused by hand-held knives. Gloves. 3.4 Long-cuff gloves Made of individually welded small metal rings, it provides protection for cuts and punctures to the hands and forearms caused by hand-held knives. Gloves. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 30865.1-2025_English be delivered?Answer: Upon your order, we will start to translate GB 30865.1-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 30865.1-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB 30865.1-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 30865.1-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 30865.1-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
