GB 29944-2013 English PDF

Standard Briefing:

Stadard ID: GB 29944-2013
Stadard Title: Food additive -- N-[N-(3,3-dimethyl-butyl)]-L-aspartyl-L-phenylalanine 1-methyl ester (neotame)
Price (USD): 259
Lead day (Deliver True-PDF English version): 3 days
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB 29944-2013259 Add to Cart 3 days Food additive -- N-[N-(3,3-dimethyl-butyl)]-L-aspartyl-L-phenylalanine 1-methyl ester (neotame) Valid

Basic Data:

Standard ID GB 29944-2013 (GB29944-2013)
Description (Translated English) Food additive��N-[N-(3, 3-dimethyl -butyl)]-L-aspartyl -L-phenylalanine 1-methyl ester (neotame)
Sector / Industry National Standard
Classification of Chinese Standard C54
Classification of International Standard 67.020
Word Count Estimation 11,143
Issuing agency(ies) National Health and Family Planning Commission of the People's Republic of China
Summary This standard applies to food additives: N-[N-(3, 3 dimethyl -butyl)]-L-��- aspartyl -L- phenylalanine 1 methyl ester (neotame).

Similar Standards:

GB 28314   GB 28308   GB 28316   GB 29936   GB 29937   GB 29934   

Contents, Scope, and Excerpt:

GB 29944-2013 Food additive-N- [N- (3, 3-dimethyl -butyl)] - L-aspartyl -L-phenylalanine 1-methyl ester (neotame) National Standards of People's Republic of China Issued on. 2013-11-29 2014-06-01 implementation National Food Safety Standard Food additives N- [N- (3,3- dimethylbutyl)] - L-α- days Aspartic -L- phenylalanine 1-methyl ester (neotame) National Food Safety Standard Food additives N- [N- (3,3- dimethylbutyl)] - L-α- aspartyl -L- phenylalanine 1-methyl ester (Neotame)

Scope

This standard applies to aspartame and 3,3-dimethyl butyraldehyde as the main raw material, in the presence of hydrogen in methanol solution was reacted after Methanol, washing and drying step of removing the food additive prepared N- [N- (3,3- dimethylbutyl)] - L-α- aspartyl -L- phenylalanine 1-A Ester (neotame). 2 chemical name, molecular formula, molecular mass and structural formula 2.1 Chemical Name N- [N- (3,3- dimethylbutyl) -L-α- aspartyl] -L-phenylalanine 1-methyl ester Formula 2.2 C 20 H30N2O5 2.3 formula 2.4 relative molecular mass 378.47 (according to 2007 international relative atomic mass) 3 Technical requirements 3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods White to off-white color of the sample placed in a proper amount of white porcelain plate, observe its color under natural light Status and powder 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method Neotame content (dry basis), w /% 97.0 ~ 102.0 Appendix A A.3 N- [N- (3,3- dimethylbutyl) alpha] aspartyl] -L-phenylalanine, w /% ≤ 1.5 Appendix A A.4 Other related substances, w /% ≤ 2.0 A.5 in Appendix A Water, w /% ≤ 5.0 GB/T 6283 Residue on ignition, w /% ≤ 0.2 GB/T 9741 pH (5 g/L solution) 5.0 ~ 7.0 GB/T 9724 Lead (Pb)/(mg/kg) ≤ 1 GB 5009.12 Specific rotation αm (20 ℃, D)/[(º) · dm2 · kg-1] -40.0 ~ -43.3 GB/T 613 a formulated a mass fraction of 0.5% of the sample solution, the results on a dry basis.

Appendix A

Testing method A.1 General Provisions Unless otherwise specified in this standard, the use of analytical reagent purity should be more than the standard titration solution, standard solution for measuring impurities, Preparations and products, should be GB/T 601, GB/T 602, the provisions of the preparation of GB/T 603, the test water should be consistent with GB/T 6682-2008 in three water Provisions. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution. A.2 Identification Test A.2.1 solubility Slightly soluble in water, soluble in ethanol. A.2.2 IR IR potassium bromide dispersion of the sample in line with the criteria in Appendix B in the infrared spectrum. Determination A.3 Neotame Content A.3.1 Reagents and materials A.3.1.1 acetonitrile. chromatography. A.3.1.2 sodium heptane. chromatography. A.3.1.3 triethylamine. chromatography. A.3.1.4 Water. GB/T 6682-2008 in a water. A.3.1.5 phosphoric acid. A.3.1.6 neotame standards. A.3.2 Instruments and Equipment High performance liquid chromatograph. with UV detection, or other equivalent detectors. A.3.3 reference chromatographic conditions A.3.3.1 Column. C18 column, 4.6 mm (inner diameter) × 100 mm (length), particle size 5 μm. Or other equivalent chromatographic separation Column and chromatographic conditions. A.3.3.2 Mobile phase. A 3.0 g sodium dissolved in 740 mL of heptane water, adding 3.8 mL of triethylamine, with phosphoric acid to adjust the pH to 3.5, and then Diluted with water to 750 mL. Then add 250 mL of acetonitrile with phosphoric acid to adjust the pH to 3.7, filtered spare. A.3.3.3 Column temperature. 45 ℃. A.3.3.4 flow rate. 1.5 mL/min. A.3.3.5 Injection volume. 20 μL. A.3.3.6 detection wavelength. 210 nm. A.3.4 Analysis step A.3.4.1 Preparation of standard solutions Weighed amount neotame standard, accurate to 0.000 1 g, with flows to match to a concentration of about 1.0 mg/mL of the standard solution. A.3.4.2 Preparation of sample solution Weighed amount of sample, accurate to 0.000 1 g, with flows to match to a concentration of about 1.0 mg/mL of the sample solution. A.3.4.3 Determination In A.3.3 reference chromatographic conditions, respectively standard solution and sample solution chromatography. Chromatogram of the sample solution and standard solution records Neotame chromatogram peak area. A.3.5 Calculation Results Neotame content mass fraction w1 according to formula (A.1) Calculated. 1  c rw (A.1) Where. The main peak rU-- sample solution chromatogram peak area; The main peak rS-- standard solution chromatogram peak area; CS-- actual concentration of the standard solution, in milligrams per milliliter (mg/mL); CU-- actual concentration of the sample solution, in milligrams per milliliter (mg/mL). A.4 N- [N- (3,3- dimethylbutyl) alpha] aspartyl] -L-phenylalanine determination A.4.1 Reagents and materials A.4.1.1 acetonitrile. chromatography. A.4.1.2 sodium heptane. chromatography. A.4.1.3 triethylamine. chromatography. A.4.1.4 Water. GB/T 6682-2008 in a water. A.4.1.5 N- [N- (3,3- dimethylbutyl) alpha] aspartyl] -L-phenylalanine standard. A.4.2 Instruments and Equipment With A.3.2. A.4.3 reference chromatographic conditions With A.3.3. A.4.4 Analysis step A.4.4.1 Preparation of standard solutions Mobile phase (A.3.3.2) as solvent, weighed amount of N- [N- (3,3- dimethylbutyl) alpha] aspartyl] -L-phenylalanine standard, exact to 0.000 1 g, formulated in a concentration of about 0.03 mg/mL of the standard solution. A.4.4.2 Preparation of sample solution Mobile phase (A.3.3.2) as solvent, weighed amount of sample, accurate to 0.000 1 g, formulated in a concentration of about 2 mg/mL of the sample solution. A.4.4.3 Determination In A.4.3 reference chromatographic conditions, respectively standard solution and sample solution chromatography. Chromatogram of the sample solution and standard solution records Chromatogram N- [N- (3,3- dimethylbutyl) alpha] aspartyl] -L-phenylalanine peak area. A.4.5 Calculation Results N- [N- (3,3- dimethylbutyl) alpha] aspartyl] -L-phenylalanine mass fraction w2 according to formula (A.2) Calculated. 2  c rw (A.2) Where. rU-- sample solution chromatogram N- [N- (3,3- dimethylbutyl) alpha] aspartyl] -L-phenylalanine peak area; rS-- standard solution chromatogram N- [N- (3,3- dimethylbutyl) alpha] aspartyl] -L-phenylalanine peak area; CS-- actual concentration of the standard solution, in milligrams per milliliter (mg/mL); CU-- actual concentration of the sample solution, in milligrams per milliliter (mg/mL). A.5 Determination of other related substances A.5.1 Reagents and materials A.5.1.1 acetonitrile. chromatography. A.5.1.2 sodium heptane. chromatography. A.5.1.3 triethylamine. chromatography. A.5.1.4 Water. GB/T 6682-2008 in a water. A.5.1.5 neotame standards. A.5.1.6 N- [N- (3,3- dimethylbutyl) alpha] aspartyl] -L-phenylalanine standard. A.5.2 Instruments and Equipment With A.3.2. A.5.3 reference chromatographic conditions With A.3.3. A.5.4 Analysis step A.5.4.1 Preparation of standard solutions With A.3.4.1. A.5.4.2 Preparation of sample solution Mobile phase (A.3.3.2) as solvent, weighed amount of sample, accurate to 0.000 1 g, formulated in a concentration of about 2 mg/mL of the sample solution. A.5.4.3 Determination In A.5.3 reference chromatographic conditions, respectively standard solution and sample solution chromatography. Chromatogram of the sample solution and standard solution records Chromatogram peak area. A.5.5 Calculation Results Mass fraction w3 other related substances according to formula (A.3) Calculated. 3  c rw (A.3) Where. rT-- sample solution chromatogram impurity (neotame, N- [N- (3,3- dimethylbutyl) -α- aspartyl] -L- phenylalanine and excluding the solvent peak) The peak area; rS-- standard solution chromatogram peak area Neotame value; CS-- actual concentration of the standard solution, in milligrams per milliliter (mg/mL); CU-- actual concentration of the sample solution, in milligrams per milliliter (mg/mL).

Appendix B

Standard infrared spectra neotame Neotame standard infrared spectra are shown in Figure B.1. Figure B.1 Neotame standard infrared spectra Wave number/cm-1
......