FZ/T 93079-2012 English PDF

US$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 93079-2012: Rotor type open-end spinning machine. Resilient mounting
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 93079-2012	179	Add to Cart	3 days	Rotor type open-end spinning machine. Resilient mounting	Valid

Similar standards

FZ/T 93048.1   FZ/T 93019   FZ/T 93080   FZ/T 93077   FZ/T 93076   

Basic data

Standard ID: FZ/T 93079-2012 (FZ/T93079-2012)
Description (Translated English): Rotor type open-end spinning machine. Resilient mounting
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W91
Classification of International Standard: 59.120.10
Word Count Estimation: 7,792
Quoted Standard: GB/T 191; GB/T 531.1; GB/T 1958; GB/T 2828.1-2003; GB/T 4879; GB/T 6543
Regulation (derived from): Ministry of Industry and Information Technology Bulletin 2012 No. 20; industry standard filing Notice 2012 No. 7 (No. 151 overall)
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the rotor spinning machine Bumpers classification parameters and marking, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to turn the rotor spinning machine with

FZ/T 93079-2012: Rotor type open-end spinning machine. Resilient mounting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rotor type open-end spinning machine.Resilient mounting ICS 59.120.10 W91 People's Republic of China textile industry standards Rotor spinning machine damping sleeve Issued on. 2012-05-24 2012-11-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee mechanical accessory spinning, dyeing and finishing of textile machinery and Technical Committee (SAC/TC215/SC1) Centralized. This standard was drafted. National Textile Machinery Quality Supervision and Inspection Center, Wuxi Wang Fei Ltd., Shanghai Chun Rui Mechanical Technology Ltd., Han Yan of China Textile Machinery Manufacturing Co., Ltd. The main drafters. Zhang Yuhong, Ji Yunfei, millet BAUER, Fan Baojun. Rotor spinning machine damping sleeve

1 Scope

This standard specifies the damping rotor spinning machine sets (hereinafter referred to as "damping set") classification, parameters and marking requirements, test methods, inspection regulations And the signs, packaging, transportation and storage. This standard applies to rotor spinning machine with a rotor damping sets.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness) GB/T 1958 Geometrical Product Specifications (GPS) shape and position tolerance testing requirements GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan GB/T 4879 rust-proof packaging GB/T 6543 transport packaging corrugated box with a single and double corrugated boxes 3 classification, parameters and markers 3.1 Classification A structured into type [Without Jacket (see Fig. 1)] and B [with a jacket (see Figure 2)]. 3.2 Parameter Parameters in Table 1. Table 1 project parameter A B Full-length l/mm 56,69,70 69 The outer ring outer diameter D1/mm 38 - Coat outer diameter D2/mm - 39 The hole diameter d/mm 22 NOTE hole number 1 2 Inner sleeve cooling holes 0,3 0 Before the rubber ring number of holes 0,5 0 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 93079-2012_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 93079-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 93079-2012_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 93079-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.