FZ/T 13014-2014_English: PDF (FZ/T13014-2014)
| Standard ID | USD | BUY PDF | Lead-Days | Standard Title (Description) | Status |
| FZ/T 13014-2014 | 329 |
Add to Cart
|
3 days
|
Cotton/vinylon blended fabric
| Valid |
| FZ/T 13014-2005 | 799 |
Add to Cart
|
5 days
|
Grey fabric of cotton and vinylon bleaded
| Obsolete |
| FZ/T 13014-1999 | 639 |
Add to Cart
|
5 days
|
Grey Fabric of Cotton and Vinylon Bleaded
| Obsolete |
| Standard ID | FZ/T 13014-2014 (FZ/T13014-2014) | | Description (Translated English) | Cotton/vinylon blended fabric | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W13 | | Classification of International Standard | 59.080.30 | | Word Count Estimation | 14,172 | | Date of Issue | 10/14/2014 | | Date of Implementation | 4/1/2015 | | Older Standard (superseded by this standard) | FZ/T 13014-2005 | | Quoted Standard | GB/T 406-2008; GB/T 2910.1; GB/T 3923.1; GB/T 4666; GB/T 4668; GB/T 8170; FZ/T 10006; FZ/T 10004; FZ/T 10009 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This Standard specifies the dimensions blended cotton gray fabric (cotton content of 50% or more) of the product classification, requirements, fabric defect score, test methods, inspection rules, marking, packaging, transport and storage. This Standard ap |
FZ/T 13014-2014
Cotton/vinylon blended fabric
ICS 59.080.30
W13
People's Republic of China textile industry standards
Replacing FZ/T 13014-2005
Victoria blended cotton gray fabric
Issued on. 2014-10-14
2015-04-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard FZ/T 13014-2005 "dimension blended cotton gray fabric." Compared with this standard FZ/T 13014-2005, major changes
The following.
--- Third cancel goods and other products;
--- Width, density, breaking strength is adjusted to the width deviation name, density deviation rate, breaking strength deviation rate, increase the fiber content of bias
Poor assessment;
--- Cloth defect score by the total points/m to min/m2, width cancel classification;
--- Rung regardless of clear and obvious defects;
--- Adjustments to the original Appendix C range, increase the moisture regain dimensional cotton blended yarn qualities, the breaking strength is calculated; delete the original Appendix D,
Press FZ/T 10013.2 execution.
The standard proposed by China Textile Industry Association.
This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized.
This standard was drafted. Fenghua double shield textile canvas Industrial Co., Ltd., Henan Xinye Textile Co., Ltd., Shanghai Textile Workers
Technical supervision of the industry, China Textile Industry Association.
The main drafters of this standard. Wangyun Xia, Hu Changming, Wu Qin Xia, Zhang Baoqing, Ye Jian Chun, Wu Yaping.
This standard replaces the standards previously issued as follows.
--- FZ/T 13014-1999, FZ/T 13014-2005.
Victoria blended cotton gray fabric
1 Scope
This standard specifies the dimension blended cotton gray fabric (cotton content of 50% or more) of product classification, requirements, cloth defect score, test side
Method, inspection rules, marking, packaging, transportation and storage.
This standard applies to the production of woven cotton blended gray fabric dimension.
This standard does not apply to large jacquard, cut pile type fabric.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 406-2008 qualities of cotton cloth
GB/T 2910.1 Textiles - Quantitative chemical analysis - Part 1. General principles of testing
GB/T 3923.1 Part 1 textile fabric tensile properties. breaking strength and elongation measurement (strip method)
Determination of GB/T 4666 Textiles length and width of
Determination of GB/T 4668 woven fabric density
GB/T 8170 repair value expressed about the rules and limit values and judgment
FZ/T 10004 cotton and chemical fiber spinning pure, blended gray fabric inspection rules
FZ/T 10006 cotton and chemical fiber spinning pure, blended qualities Bumian junction impurity lattice defect rate test
FZ/T 10009 cotton and chemical fiber spinning pure, blended gray fabric marking and packaging
Category 3
Dimensional qualities of cotton blended fabric product variety, size classification according to user needs, in accordance with Appendix A to develop.
4 Requirements
4.1 Project
Victoria blended cotton gray fabric requirements are divided into intrinsic quality and appearance of the qualitative aspects, including the intrinsic quality of the weave, the width deviation rate, fiber
Dimensional content deviation, density deviation rate, breaking strength deviation rate, frame rate Nep impurity defects six, the appearance of the quality of a fabric defect.
4.2 grading regulations
4.2.1 Cotton-dimensional qualities blended fabric products divided into superior products, first-class product and the second product, lower than the second product is substandard products.
4.2.2 Review Victoria blended cotton gray fabric, etc. to match the units of the weave, width deviation rate, fabric defects by horses ratings, fiber content bias,
Density deviation rate, breaking strength deviation rate, frame rate Nep impurity defects press criticism, to which the lowest for a piece of cloth and other goods and other products.
4.2.3 Dimension blended cotton gray fabric grading provisions are shown in Table 1, Table 2 and Table 3.
......
|