Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169760 (Aug 8, 2020)
HOME  COVID-19   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

NBT42077-2016

Chinese Standard: 'NBT42077-2016'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
NB/T 42077-2016English445 Add to Cart 0--15 minutes. Auto immediate delivery. In-Cable Control and Protective Device for mode 2 charging of electric road vehicles (IC-CPD) Valid NB/T 42077-2016
NB/T 42077-2016Chinese69 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

  Google-Books (Full-PDF will be auto-delivered in 0~10 mins):   GB/Z 32513-2016  GB 7251.6-2015  NB/T 42077-2016  NB/T 33001-2018  NB/T 33002-2018
In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  
ICS 29.120.50
K 31
Record No.. 55686-2016
the People’s Republic of China
In-cable Control and Protective Device
for Mode 2 Charging of Electric Road
Vehicles (IC-CPD)
Contents
Foreword... i
Introduction ...ii
1 Scope .. 1
2 Normative References.. 2
3 Terms and Definitions ... 4
4 Classification ... 19
5 Characteristics of IC-CPD ... 22
6 Marking and Other Product Information... 26
7 Standard Conditions for Operation in Service and for Installation... 30
8 Requirements for Construction and Operation ... 31
9 Tests .. 50
Annex A (Normative) Test Sequences and Number of Samples to be Submitted for
Verification of Conformity to This Standard ... 128
Annex B (Normative) Routine Tests... 134
Annex C (Normative) Determination of Clearances and Creepage Distances... 135
Annex D (Informative) Switched-protective Conductor Application... 140
Annex E (Informative) Example of IC-CPD for Mode 2 Charging .. 143
Annex F (Informative) Types of IC-CPD according to Construction and Assembly.. 144
Annex G (Informative) Methods for Determination of Short-circuit Power Factor ... 145
Bibliography .. 147
In-cable Control and Protective Device for Mode
2 Charging of Electric Road Vehicles (IC-CPD)
1 Scope
This standard applies to in-cable control and protection devices for mode 2 charging of
electric road vehicles, hereafter referred to as IC-CPD, including control and safety
functions.
This standard applies to portable devices performing simultaneously the functions of
detection of the residual current, of comparison of the value of this current with the
residual operating value and of opening of the protected circuit when the residual current
exceeds this value.
The IC-CPD according to this standard shall.
——has a control pilot function controller in accordance with GB/T 18487.1-2015;
——checks supply conditions and prevents charging in case of supply faults under
specified conditions;
——may have a switched protective conductor.
These IC-CPDs are intended for use in TN-, and TT-systems. The use of IC-CPDs in IT
systems may be limited.
Residual currents with frequencies different from the rated frequency, d.c. residual
currents and specific environmental situation are considered.
This standard is applicable to IC-CPDs performing the safety and control functions as
required in GB/T 18487.1-2015 for mode 2 charging of electric vehicles.
This standard is applicable to IC-CPDs with single-phase circuits not exceeding 250V and
maximum rated current not exceeding 16A.
This standard is applicable to IC-CPDs to be used in a.c. circuits only, with preferred
values of rated frequency 50Hz, 60Hz or 50/60Hz. IC-CPDs according to this standard are
not intended to be used to supply electric energy towards the connected grid.
This standard is applicable to IC-CPDs having a rated residual operating current not
exceeding 30mA and is intended to provide additional protection for the circuit
downstream of the IC-CPD in situations where it cannot be guaranteed that the installation
is equipped with an RCD with IΔn≤30mA.
The IC-CPD consists of.
——a plug for connection to a socket-outlet in the fixed installation;
——one or more subassemblies containing the control and protection features;
——a cable between the plug and the subassemblies (optional);
——a cable between the subassemblies and the vehicle connector (optional);
——a vehicle connector for connection to the electric vehicle.
GB 2099.1-2008 is applicable to plugs for household and similar use.
Power supply plugs, vehicle connectors and cables which are part of the IC-CPD are not
tested according to this standard. These parts are tested separately according to their
specific product standards.
The switching contacts of the IC-CPD are not required to provide isolation, as isolation
can be ensured by disconnecting the plug.
The IC-CPD may have a non-replaceable integral fuse in the line(s) and/or neutral current
path.
2 Normative References
The following documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the
referenced document (including any amendments) applies.
GB/T 1043 Plastics - Determination of Charpy Impact Properties (ISO 179)
GB/T 1043.1-2008 Plastics - Determination of Charpy Impact Properties- Part 1.
Non-instrumented Impact Test (ISO 179-1.2000, IDT)
GB 2099.1-2008 Plugs and Socket-outlets for Household a......
Related standard:   NB/T 31038-2012
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2020