Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169760 (Sep 19, 2020)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

FZT01093-2008

Chinese Standard: 'FZT01093-2008'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
FZ/T 01093-2008English80 Add to Cart 0--15 minutes. Auto immediate delivery. Textiles. Woven fabrics. Construction. Methods of analysis. Determination of linear density of yarn removed from fabric Obsolete FZ/T 01093-2008
FZ/T 01093-2008Chinese16 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

  Google-Books (Full-PDF will be auto-delivered in 0~10 mins):   GB/T 38473-2020  GB/T 33610.3-2019  FZ/T 01026-2017  FZ/T 01026-2009  FZ/T 01093-2008
In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  
FZ/T 01093-2008
TEXTILE INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 59.080.30
W 04
Replacing FZ/T 01093-1999
Textiles - Woven fabrics - Construction - Methods of
analysis - Determination of linear density of yarn
removed from fabric
(ISO 7211-5:1984, MOD)
机织物结构分析方法 织物中拆下纱线线密度的测定
ISSUED ON: APRIL 23, 2008
IMPLEMENTED ON: OCTOBER 01, 2008
Issued by: National Development and Reform Commission, People's
Republic of China
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative references ... 5 
3 Principle ... 6 
4 Equipment ... 6 
5 Atmosphere for moisture conditioning and test ... 6 
6 Sample ... 6 
7 Steps ... 6 
8 Calculation and representation of results ... 8 
9 Test report ... 8 
Foreword
The revision of this Standard uses ISO 7211-5:1984 “Textiles - Woven fabrics -
Construction - Methods of analysis - Part 5: Determination of linear density of
yarn removed from fabric”.
This Standard was redrafted based on ISO 7211-5:1984. The main differences
between this Standard and ISO 7211-5:1984 are as follows:
1. Deleted the introduction;
2. Replaced the international standards by corresponding national standards
or industry standards in normative references;
3. Added inapplicable content in the scope and used partial content of
introduction as notes;
4. Simplified the description of sample quantity; deleted the requirements for
containing different weft tubes; the warp and weft samples were unified
into 2 blocks; weft group weighing was changed to weigh together;
5. Added the calculation of drying value plus official moisture regain;
6. Added the relevant sub-clauses for determination of strand line density
and its representation method (7.3 and 8.3);
7. Added “Sample description” in test report.
This Standard replaces FZ/T 01093-1999 “Textiles - Woven fabrics -
Construction - Methods of analysis - Determination of linear density of yarn
removed from fabric”.
Compared with FZ/T 01093-1999, the main technical modifications in this
Standard are as follows:
1. modified 1.3 of the scope in FZ/T 01093-1999 as the content of note;
2. simplified regulation of standard atmospheres for humidity conditioning
and testing;
3. deleted the requirement that the sample preferably contains 5 weft tubes
in the sample request; the warp and weft samples are unified into 2 blocks;
weft group weighing is changed to weighing together;
4. added the calculation of drying value plus official moisture regain.
Textiles - Woven fabrics - Construction - Methods of
analysis - Determination of linear density of yarn
removed from fabric
1 Scope
This Standard specifies two methods for determining linear density of yarn
removed from fabric. One method is to determine the linear density of yarn
removed from fabric without removing the non-fibrous material. The other
method is to determine the linear density of yarn removed from fabric after
removal of non-fibrous materials. Choose one of them as needed.
This Standard applies to the determination of the linear density of yarn removed
from most woven fabrics. It is not applicable to the fabrics that the curl on the
yarn cannot be eliminated under a certain straightening tension, and the yarn
is damaged during weaving, finishing and analysis of the method.
NOTE: The linear density of the yarn in the fabric obtained by the method of this Standard may be different
from the linear density of the original yarn before weaving. If the sample is not large enough, the results
may vary significantly.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For dated references, the subsequent
amendments (excluding corrigendum) or revisions do not apply to this Standard,
however, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 2543.1, Textiles - Determination of twist in yarns - Part 1: Direct
counting method (GB/T 2543.1-2001, eqv ISO 2061:1995)
GB 6529, Textiles - Standard atmospheres for conditioning and testing
GB/T 8693, Textiles - Designation of yarns
FZ/T 01091, Textiles - Woven fabrics – Construction - Methods of analysis -
Determination of crimp of yarn in fabric (FZ/T 01091-2008, ISO 7211-3:1984,
MOD)
7.1.1 Separating yarn and measuring length
Related standard:   FZ/T 01099-2008  FZ/T 01101-2008
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2020