HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (3 Nov 2024)

YY 0585.2-2019 PDF in English


YY 0585.2-2019 (YY0585.2-2019) PDF English
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
YY 0585.2-2019English170 Add to Cart 0-9 seconds. Auto-delivery. Fluid lines for use with pressure infusion equipment and accessories for single use - Part 2: Accessories Valid
YY 0585.2-2005English120 Add to Cart 0-9 seconds. Auto-delivery. Fluid lines for use with pressure infusion equipment and accessories for single use - Part 2: Accessories Obsolete
Standards related to (historical): YY 0585.2-2019
PDF Preview

YY 0585.2-2019: PDF in English

YY 0585.2-2019 YY NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 11.040.20 C 31 Replace YY 0585.2-2005 Fluid lines for use with pressure infusion equipment and accessories for single use - Part 2: Accessories (ISO 8536-10: 2015, MOD) ISSUED ON: MAY 31, 2019 IMPLEMENTED ON: DECEMBER 1, 2020 Issued by: National Medical Products Administration Table of Contents Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Materials ... 6 4 Physical requirements ... 6 5 Chemical requirements ... 7 6 Biological requirements ... 7 7 Packaging ... 7 8 Labelling ... 7 9 Disposal ... 9 Appendix A (Normative) Physical test ... 10 Appendix B (Normative) Chemical test ... 12 Appendix C (Normative) Biological test ... 13 Appendix D (Informative) Technical differences between this part and ISO 8536-10: 2015 and their reasons ... 14 References ... 16 Fluid lines for use with pressure infusion equipment and accessories for single use - Part 2: Accessories 1 Scope This part of YY 0585 specifies the physical, chemical, and biological requirements for accessories used with pressure infusion equipment. This part applies to accessories for single-use sterile fluid lines and accessories for pressure infusion equipment specified in YY 0286.4, including: a) Two-way stopcock (2SC), three-way stopcock (3SC), four-way stopcock (4SC) and stopcocks manifold (SM); Note: The labelling of the stopcock depends on the number of connections. The number of possible functional positions can be indicated by the addition of a supplementary note, as expressed by a slash and the number of possible positions of the stopcock. For example, a 3/4-way stopcock means a three- way stopcock with 4 possible positions. b) Units with injection sites (UIS) or units with check valves (UCV); c) Stoppers (S) or adapters (A). 2 Normative references The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard. GB/T 1962.21 ) Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 2: Lock fittings (GB/T 1962.2-2001, ISO 594- 2:1998, IDT) GB 8368 Infusion sets for single use - Gravity feed (GB 8368-2018, ISO 8536-4: 2010, MOD) YY 0286.4 Special infusion sets-Part 4:Single-use infusion equipment for use with pressure infusion apparatus (YY 0286.4-2006, ISO 8536-8: 2004, IDT) 1) [Translator note: Copied from YY 0585.1-2019] GB/T 1962 will be replaced by Part 7 of YY/T 0916 series standard (ISO 80369-7: 2015, IDT). YY/T 0466.1 Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (YY/T 0466.1-2016, ISO 15223-1: 2012, IDT) YY 0585.4 Fluid lines for use with pressure infusion equipment and accessories for single use - Part 4: Check valves (YY 0585.4-2009, ISO 8536-12: 2007, MOD) Pharmacopoeia of the People’s Republic of China 3 Materials The materials from which accessories are manufactured shall meet the requirements specified in Chapter 4, Chapter 5, and Chapter 6. 4 Physical requirements 4.1 Avoidance of air bubbles All components of accessories shall be designed so that no air bubbles are detected in flow channels when they are tested in accordance with A.1 of Appendix A. 4.2 Particulate contamination The accessories shall be manufactured with minimal particulate contamination. Fluid pathway surfaces shall be smooth and clean. When the test is carried out according to A.2, the pollution index shall not be exceeded. 4.3 Connection strength When the test is carried out in accordance with the provisions of A.3, the accessories and the connections between all components (except the protective cover) shall be able to withstand a static tensile force of not less than 15 N for 15 s. For stopcocks, the connections between the plug and the housing shall be able to withstand the tensile force regardless of the position of the plug. 4.4 Leakage The accessories shall be impermeable to air, microorganisms and fluid. No matter where the plug is located, it shall be sealed. When the test is carried out according to A.4, there shall be no air or water leakage. 4.5 Adapters with female and/or male conical fittings The adapters shall have female conical fittings and/or male conical fittings in 8.2 Single package A single package shall be labelled with at least the following information: a) The manufacturer’s name and address; b) Text description of the contents, such as single-use stopcocks manifold; c) The accessories are pyrogen-free, or the accessories are free of bacterial endotoxins; d) The graphic symbols given in YY/T 0466.1 are used to indicate that the accessories are sterile; e) Lot number that begins with the word “LOT”, or indicated by the graphic symbol of YY/T 0466.1; f) The expiration date (month/year) represented by the corresponding text or the graphic symbols given in YY/T 0466.1; g) The accessories are for single use only that is indicated by the description of the equivalent text, or the graphic symbol conforming to YY/T 0466.1; h) Instructions for use, including warnings, such as checking whether the protective cap has fallen off; i) The letter “P” that represents pressure, and the size of which shall stand out from the surrounding text. If the single package area is too small to give all the information and/or symbols, the information can be simplified to e) and f). In this case, the information required by this clause shall be given on the label of the next larger shelf or multi-unit package. 8.3 Shelf or multi-unit package The shelf or multi-unit package shall be labelled with at least the following information: a) The manufacturer’s name and address; b) Text description of the contents, such as single-use stopcocks manifold; c) Lot number that begins with the word “LOT”, or indicated by the graphic symbol of YY/T 0466.1; d) The expiration date (month/year) represented by the corresponding text or the graphic symbols given in YY/T 0466.1; e) The text “Safe for use with pressure infusion equipment”; Appendix A (Normative) Physical test A.1 Air bubbles Fill the accessory to be tested with distilled water according to the usual operation method, and visually check whether there are air bubbles in the fluid pathway of the transparent components. A.2 Particulate contamination test The volume of the rinse fluid shall be at least 50 times the volume of the inner cavity of the test sample, and the test shall be carried out in accordance with the provisions of GB 8368. A.3 Connection strength test The accessory to be tested shall be subjected to an axial static tensile force of 15 N for 15 s. The same tensile force is also applied in the direction of the rotation axis of the stopcock’s plug body. Inspect whether the connections of the components can withstand the applied force. A.4 Leakage test A.4.1 Before starting the test, place the entire system at the test temperature for conditioning. A.4.2 Use the male and/or female adapters that are in accordance with GB/T 1962.2 to seal each port of the accessory, connect it with the compressed air source, apply air pressure of 50 kPa to the accessory for 15 s, and then check whether the accessory has air leakage in the water at (40±1) ℃. A.4.3 Fill the accessory with distilled water at (40±1) ℃, and apply air pressure of 200 kPa for 15 min to check whether there is water leakage. A.5 Stopcock manipulation test Rotate the plug body to all functional positions and check for adverse effects on adjacent components or incorrect adjustment of the plug body movement. A.6 Test for units with injection sites Appendix B (Normative) Chemical test B.1 Preparation of test solution Take components with a total area of 100 cm2. Disassemble the components that are in contact with the fluid line in the sterilized and ready-to-use accessory, and arrange them according to the same material. Disintegrate each component so that its inner and outer surfaces can be soaked in water, and put them into a 250 mL wide-mouth flask; add 200 mL of purified water that is in accordance with the specification of the current version of “Pharmacopoeia of the People’s Republic of China”, cover the flask, and place it at (37±1) ℃ for 24 h. Take another 250 mL wide-mouth flask, add 200 mL of purified water that is in accordance with the specification of the current version of “Pharmacopoeia of the People’s Republic of China”, cover it, and place it at (37±1) ℃ for 24 h. This fluid is used as the blank control fluid for the test carried out according to GB 8368. B.2 Test procedure The test shall be carried out in accordance with the provisions of GB 8368, but the test solution specified in B.1 shall be used. ......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.