HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (1 Dec 2024)

TB/T 2328.5-2008 PDF in English


TB/T 2328.5-2008 (TB/T2328.5-2008, TBT 2328.5-2008, TBT2328.5-2008)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
TB/T 2328.5-2008English90 Add to Cart 0-9 seconds. Auto-delivery. Test Method for Railway Ballast – Part 5: Crushing Rate Test for Ballast Aggregate Obsolete
TB/T 2328.5-1992English199 Add to Cart 2 days (Railroad ballast gravel ballast aggregate crushing test method) Obsolete
Standards related to (historical): TB/T 2328.5-2008
PDF Preview

TB/T 2328.5-2008: PDF in English (TBT 2328.5-2008)

TB/T 2328.5-2008 TB NATIONAL RAILWAY INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 45.040 S 05 Test Method for Railway Ballast – Part 5. Crushing Rate Test for Ballast Aggregate ISSUED ON. NOVEMBER 14, 2008 IMPLEMENTED ON. DECEMBER 01, 2008 Issued by. Ministry of Railways of PRC Table of Contents Foreword ... 3 1 Scope ... 5 2 Terms and Definitions ... 5 3 Test Method ... 5 4 Calculation ... 6 Foreword TB/T 2328 Test Method for Railway Ballast can be divided into the following 19 parts. --- Part 1. Test for Abrasion Loss Rate of Los Angeles; --- Part 2. Test for the Impact Ductility of Standard Aggregate; --- Part 3. Dry Milling Test for Abrasive Hardness Coefficient K of Stone Material; --- Part 4. Crushing Rate Test for Standard Aggregate; --- Part 5. Crushing Rate Test for Ballast Aggregate; --- Part 6. Permeability Coefficient Test; --- Part 7. Compressive Strength Test for Stone Powder Mould; --- Part 8. Liquid Limit Test for Stone Powder; --- Part 9. Plastic Limit Test for Stone Powder; --- Part 10. Combined Liquid and Plastic Limit Test for Stone Powder; --- Part 11. Loss Rate Test for the Soaking of Sodium Sulfate Liquor; --- Part 12. Density Test for Stone Material; --- Part 13. Bulk Density Test for Stone Material; --- Part 14. Ballast Size Grading Test; --- Part 15. Test for Acicular Index and Sheet index; --- Part 16. Test for the Content of Weathering Particles and Other Miscellaneous Stone; --- Part 17. Test for the Content of Powder with Grain Size below 0.1mm; --- Part 18. Test for the Cleanliness of Particle Surface; --- Part 19. Standard for the Ballast Mesh Sieve. This Part belongs to Part 5 of TB/T 2328. This Part replaces TB/T 2328.5-1992 Test Method for Railway Ballast – Part 5. Crushing Rate Test for Ballast Aggregate. Compared with TB/T 2328.5-1992, this Part has the major changes as follows. Test Method for Railway Ballast – Part 5. Crushing Rate Test for Ballast Aggregate 1 Scope This Part specifies the test method and calculation for the crushing rate of the railway ballast aggregate. This Part is applicable to the crushing rate test for the railway ballast aggregate. 2 Terms and Definitions The following terms and definitions are applicable to this Part. 2.1 Ballast collect stuff crunch rate The grading change parameter after the ballast aggregate specimen is crushed according to the specified mould and load. 3 Test Method 3.1 Equipment and machinery 3.1.1 Pressure tester. 1000kN. 3.1.2 Mould for crushing rate of ballast aggregate can refer to Figure 1. Figure 1 -- Mould for Crushing Rate of Ballast Aggregate Unit. mm ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.