HOME   Cart   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189759 (3 Dec 2023)

SH/T 1499.9-1997 (SH/T1499.9-1997)

Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
SH/T 1499.9-1997English70 Add to Cart 0-9 seconds. Auto-delivery. Pure adipic acid. Measurement of melt colour (in Pt - Co scale)  

SH/T 1499.9-1997: PDF in English (SHT 1499.9-1997)

SH/T 1499.9-1997
ICS 71.080.40
G 15
Pure adipic acid -
Measurement of meit colour (in Pt-Co scale)
ISSUED ON. JULY 12, 1997
Issued by. China Sinopec Corp.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Reference standards ... 4
3 Method summary ... 4
4 Reagents and solutions ... 4
5 Instruments and equipment ... 5
6 Sampling ... 5
7 Analysis steps ... 5
8 Result expression ... 5
9 Report ... 5
This Standard is equivalent to 4.12 “Measurement of melt colour (in Pt-Co scale)” in
GOCT 10558-80 * (No.2 Modification Notice was approved in September 1989, and
No.2 Modification Notice was approved in March 1992) “Adipic acid - Technical
This Standard is the test method added for this revision of SH/T 1499-92.
This Standard is written in accordance with GB/T 1.1-1993.
This Standard is proposed by Liaoyang Petrochemical Company.
This Standard is under the jurisdiction of Subcommittee on Petrochemistry of National
Technical Committee on Chemical of Standardization Administration of China.
This Standard is drafted by No.4 Chemical Factory of Liaoyang Petrochemical
Main drafters of this Standard. Xue Shaoju, Tang Min, Tong Enbao.
This Standard was first published on July 12, 1997.
Pure adipic acid -
Measurement of melt colour (in Pt-Co scale)
1 Scope
This Standard specifies the visual colorimetric method for the measurement of melt
colour of pure adipic acid.
This Standard is applicable to the measurement of melt colour of pure adipic acid.
2 Reference standards
The following standards contain provisions which, through reference in this Standard,
constitute provisions of this Standard. At the time of publication of this Standard, the
versions shown are valid. All standards will be revised, and the parties to agreements
based on this Standard are encouraged to investigate the possibility of applying the
most recent editions of the standards.
GB/T 605-88 Chemical reagent - General method for the measurement of colour (in
Hazen units) (eqv ISO 6353-1.1982 GM36)
GB/T 6678-86 General principles for sampling chemical products
GB/T 6679-86 General rules for sampling of solid chemical products
GB/T 6682-92 Water for laboratory use - Specifications
3 Method summary
HEAT the sample to 250 °C and the colour of the sample is obtained by visually
comparing the sample with the platinum-cobalt standard solution in the molten state.
4 Reagents and solutions
Platinum-cobalt standard solution. platinum-cobalt standard solution with 10 ~ 70
platinum-cobalt colour, prepared according to the specifications of GB/T 605.