Powered by Google www.ChineseStandard.net Database: 189759 (16 Jun 2024)

QC/T 1000.2-2015 PDF in English

QC/T 1000.2-2015 (QC/T1000.2-2015, QCT 1000.2-2015, QCT1000.2-2015)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
QC/T 1000.2-2015English175 Add to Cart 0-9 seconds. Auto-delivery. Performance Requirements and Test Methods of Non-woven on Automotive Filter--Part 2:Non-woven of filters for Air Filter Valid

PDF Preview

Standards related to: QC/T 1000.2-2015

QC/T 1000.2-2015: PDF in English (QCT 1000.2-2015)

QC/T 1000.2-2015
ICS 43.040
T 05
Performance requirements and test methods of no-
woven on automotive filter – Part 2. Non-woven of
filters for air filter
Issued by. Ministry of Industry and Information Technology of the
People’s Republic of China
Table of Contents
Announcement of Ministry of Industry and Information Technology of the
People's Republic of China ... 3
Foreword ... 7
1 Scope ... 8
2 Normative references ... 8
3 Terms and definitions ... 9
4 Requirements... 10
5 Test methods ... 11
6 Inspection rules ... 12
7 Packing, transportation and storage ... 13
Numbers, standard names and initial implementation dates of 17
automotive industry standards
No. Standard number Standard name Standard number being substituted
implementation date
287 QC/T 991-2015
Passenger cars - Light
alloy wheels - 90°
impact test procedure
288 QC/T 717-2015
Road vehicle – Wheels
- Requirements and
Measuring methods of
radial and lateral run-
QC/T 717-2004
ISO 16833.2006,
289 QC/T 52-2015 Refuse collection vehicle QC/T 52-2000 2015-10-01
290 QC/T 652-2015 Suction-type sewer scavenger QC/T 652-2000 2015-10-01
291 QC/T 992-2015 Municipal emergency service vehicle 2015-10-01
292 QC/T 993-2015 Explosive transport vehicle 2015-10-01
293 QC/T 994-2015 Demountable tanker carrier 2015-10-01
294 QC/T 995-2015 Hydrostatic drive modular transporter 2015-10-01
295 QC/T 764-2015
Road vehicles -
Hydraulic braking
system - Simple flare
pipes, tube tapped
holes male fittings and
hose end fittings
QC/T 764-2006 2015-10-01
296 QC/T 239-2015
Specifications and
bench test methods for
commercial vehicle
service brake
QC/T 239-1997
QC/T 479-1999 2015-10-01
297 QC/T 996-2015
Specifications and
bench test methods of
automobile air dryer
298 QC/T 997-2015
Passenger car full load
overall frame body
structure requirements
Performance requirements and test methods of no-
woven on automotive filter – Part 2. Non-woven of
filters for air filter
1 Scope
This Part specifies the classification, requirements, test methods, inspection rules,
marking, packing, transportation and storage of non-woven of filters for air filter
(hereinafter referred to as non-woven).
This Part applies to non-woven of filter for air filter.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this document.
GB 6529, Textiles – Standard atmospheres for conditioning and testing
GB 8410, Flammability of automotive interior materials
GB 18401, National general safety technical code for textile products
GB/T 2828.1, Sampling procedures for inspection by attributes – Part 1. Sampling
schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2912.1, Textiles – Determination of formaldehyde – Part 1. Free and
hydrolized formaldehyde (Water extraction method)
GB/T 5453, Textiles – Determination of the permeability of fabrics to air
GB/T 7573, Textiles – Determination of pH of aqueous extract
GB/T 17592, Textiles – Test method of the use of banned azo colourants
GB/T 22364, Paper and board - Determination of resistance to bending
GB/T 23344, Textiles – Determination of 4-aminoazobenzene
GB/T 24218.1, Textiles – Test methods for nonwovens – Part 1. Determination of
mass per unit area
GB/T 24218.2, Textiles - Test methods for nonwovens – Part 2. Determination of
GB/T 24218.3, Textiles – Test methods for nonwovens – Part 3. Determination of
tensile strength and elongation (strip method)
HJ/T 324, Specifications for environmental protection product – Fabric for bag
QC/T 794, Internal-combustion engine industry filter paper
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
hot forming presses filter media
non-woven filter media which are used for the hot forming process for the production
of air filter
non-hot forming presses filter media
non-woven filter media which are used for the non-hot forming process for the
production of air filter
precision filter media for commercial vehicle
non-woven filter media for air filter primary air element for commercial vehicle
Table 2 – Safety technical requirements
Item Requirements
pH 4.0 ~ 8.5
Sensory odours None
Formaldehyde content, mg/kg ≤ 10
Resoluble carcinogenic aromatic amine dyestuffs Banned
4.2.4 Tolerance of dimensions
Tolerance of width of filter media is ± 1 mm. Drum diameter of filter media rolls is
specified to be Φ 600 mm, with a tolerance of ± 50 mm. Filter media rolls shall have
standard drum cores with an inner diameter of Φ 76 mm. Tolerance of thickness of
filter media is ± 1 m.
NOTE. Width and drum core diameter of filter media can also be as agreed in contracts.
5 Test methods
5.1 Standard atmospheric conditions for sample processing and test shall be as
specified in GB 6529.
5.2 Visual inspection is carried out for appearance inspection.
5.3.2 Calculation result.
ΔG – tolerance of grammage, %;
M – actually measured grammage, g/m2;
m – nominal grammage, g/m2.
5.4 Tolerance of thickness
5.4.1 Determine thickness as specified in GB/T 24218.2.
5.4.2 Calculation result.
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.