PDF Q/BQB 130-2018 English
Search result: Q/BQB 130-2018
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| Q/BQB 130-2018 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Rolled slab
| |
PDF Preview: Q/BQB 130-2018
Q/BQB 130-2018: PDF in English (QBQB 130-2018) Q/BQB 130-2018
BQB
ENTERPRISE STANDARD OF BAOSTEEL
Replacing Q/BQB 130-2014
Rolled Slab
初扎板坯
ISSUED ON. JANUARY 15, 2018
IMPLEMENTED ON. APRIL 10, 2018
Issued by. Baoshan Iron & Steel Co., Ltd.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Information Required for Ordering ... 4
3 Dimension, Shape, Weight and Allowable Deviation ... 4
4 Technical Requirements ... 5
5 Inspection and Test ... 6
6 Marking and Inspection Documents ... 7
Foreword
This Standard was drafted as per the requirements and format specified in GB/T 1.1-
2009 Directives for Standardization – Part 1. Structure and Drafting of Standards.
This Standard is based on the characteristics of our company’s products and
processes.
Please note that some contents of this Standard may involve patents. The issuing
organization of this Standard does not assume the responsibility for identifying these
patents.
This Standard replaces Q/BQB 130-2014. Compared with Q/BQB 130-2014, this
Standard has the major changes as follows.
--- Add rolled slab for forging in the Scope;
--- For dimensions. expand the maximum nominal width from 250mm in Table 1 to
500mm; modify the minimum nominal width from 750mm to 650mm;
correspondingly modify the dimension allowable deviation, shape and surface
quality requirements, for instance, the sickle bend per meter of slab with nominal
thickness greater than 250mm shall be no greater than 15mm; modify 4.4.1 and
Table 3;
--- Modify the sub-clause 3.2.1 from “the bend per meter of slab shall be no greater
than 20mm; total bending shall be no greater than 2.0% of total length” into “the
bend per meter of slab shall be no greater than 15mm; total bending shall be no
greater than 1.5% of total length”.
This Standard was proposed by Manufacturing Management Department of Baoshan
Iron & Steel Co., Ltd.
This Standard shall be under the jurisdiction of Manufacturing Management
Department of Baoshan Iron & Steel Co., Ltd.
This Standard was drafted by Manufacturing Management Department of Baoshan
Iron & Steel Co., Ltd.
Chief drafting staff of this Standard. Xu Qing.
The historical editions replaced by Q/BQB 130-2014 are as follows.
--- Q/BQB 130-1985, Q/BQB 130-1986, Q/BQB 130-1994, Q/BQB 130-1999, Q/BQB
130-2003, Q/BQB 130-2009.
cleaning position shall be smooth
without corner
5.2 Surface quality inspection
The surface quality of the slab shall be visually examined block by block.
5.3 Batching rules
The slab shall be inspected and accepted in batches; each batch consists of the
products with the same grade, the furnace number and the same specification.
6 Marking and Inspection Documents
6.1 Marking
The furnace number, grade, specification and slab number of each slab shall be
indicated on its end face.
6.2 Inspection document (quality certificate)
Each batch of delivery slabs must be certified to meet the requirements of the standard,
and the inspection document (quality certificates); the inspection document shall
indicate the following contents.
a) Supplier name. Baoshan Iron & Steel Co., Ltd.;
b) Purchaser name;
c) The date of issuance of the inspection document;
d) Contract No.;
e) Grade;
f) Standard number;
g) Furnace number, number of blocks, weight;
h) Product name, specification;
i) The test results specified in this Standard;
j) Signature of the person in charge of the quality management department.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|