Q3 10113000006C007-2017 PDF English
Search result: Q3 10113000006C007-2017_English: PDF (Q310113000006C007-2017)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| Q31/0113000006C007-2017 | English | 185 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Cleaning spray [Enterprise standard of Shanghai Life-Beauty]
| |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): Q3 10113000006C007-2017 Related standards: Q3 10113000006C007-2017
PDF Preview: Q3 10113000006C007-2017
Q3 10113000006C007-2017: PDF in English Q31/0113000006C007-2017
ENTERPRISE STANDARD OF SHANGHAI CITY
Cleaning spray
清洁喷雾
ISSUED ON: OCTOBER 25, 2017
IMPLEMENTED ON: OCTOBER 25, 2017
Issued by: Shanghai Life-Beauty Cosmetics Co., Ltd.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Technical requirements ... 5
3.1 Sensory indicators ... 5
3.2 Physical-chemical indicators ... 5
3.3 Hygienic indicators ... 5
3.4 Net content requirements ... 6
3.5 Packaging appearance requirements ... 6
4 Inspection method ... 6
4.1 Sensory indicators ... 6
4.2 Physical-chemical indicators ... 6
4.2.2 Heat resistance ... 7
4.3 Hygienic indicators ... 7
4.4 Net content deviation ... 7
5 Inspection rules ... 7
6 Marking, packaging, transportation, storage, shelf life ... 8
6.1 Marking for sales packaging ... 8
6.2 Packaging ... 8
6.3 Transportation ... 8
6.4 Storage ... 8
6.5 Shelf life ... 8
Cleaning spray
1 Scope
This standard specifies the technical requirements, inspection methods, inspection
rules, marking, packaging, transportation, storage and transportation requirements for
cleaning spray.
This standard applies to liquid cleaning spray series products that are produced by
Shanghai Life-Beauty Cosmetics Co., Ltd.
2 Normative References
The following documents are essential for the application of this document. For dated
references, only the dated versions apply to this document. For the cited documents
without date, the latest version (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB 5296.3 Instruction for use of consumer products - General labelling for cosmetics
GB 7916 Hygienic standard for cosmetics
GB/T 13531.1 General methods on determination of cosmetics - Determination of pH
QB/T 1684 Inspecting rules for cosmetics
QB/T 1685 Requirements of packaging appearance for cosmetic products
QB/T 2660 Skin tonic
JJF 1070 Rules of Metrological Testing for Net Quantity of Products in Prepackages
with Fixed Content
“Measures for the Supervision and Administration of Measurement of Quantitative
Packaging Commodities” -- State Administration of Quality Supervision, Inspection and
Quarantine – [2005] Order No.75
“Cosmetic Safety Technical Specifications (2015 Edition)” -- State Food and Drug
Administration -- Announcement 2015 No.268
"Regulations on the Administration of Cosmetic Labeling" -- State Administration of
Quality Supervision, Inspection and Quarantine -- Order [2007] No.100
4.2.2 Heat resistance
4.2.2.1 Instruments
Constant temperature incubator: The temperature control accuracy is 1°C.
4.2.2.2 Operating procedures
Adjust the constant temperature incubator to (40±1)°C in advance; place a bottle of
the packaged sample in the constant temperature incubator. Take out after 24 h;
restore to room temperature, then observe visually.
4.2.3 Cold resistance
4.2.3.1 Instruments
Constant temperature incubator: The temperature control accuracy is 1°C.
4.2.3.2 Operating procedures
Adjust the constant temperature incubator to (5±1)°C in advance; place a bottle of the
packaged sample in the constant temperature incubator. Take out after 24 h; restore
to room temperature, then observe visually.
4.3 Hygienic indicators
Test according to the method specified in "Cosmetics Safety Technical Specifications
(2015 Edition)".
4.4 Net content deviation
Follow the method specified in JJF 1070.
5 Inspection rules
5.1 Inspection rules are carried out in accordance with the provisions of QB/T 1684.
5.2 Products must be inspected by the company's quality department before they can
leave the factory.
5.3 For factory inspection the items are this standard’s 3.1, 3.2, 3.3 (total number of
colonies, total number of molds and yeasts).
5.4 For type inspection, the items are all technical indicators in this standard. Under
normal circumstances, it is carried out once a year. If one of the following situations
occurs, then the type inspection must also be carried out:
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|