HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (9 Feb 2025)

NB/T 47018.4-2022 PDF English


Search result: NB/T 47018.4-2022 English: PDF (NB/T47018.4-2022)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
NB/T 47018.4-2022English200 Add to Cart 0-9 seconds. Auto-delivery. Technical conditions for ordering welding materials for pressure equipment - Part 4: Submerged arc welding wire and flux Valid
NB/T 47018.4-2017English165 Add to Cart 0-9 seconds. Auto-delivery. Technical permission of welding materials for pressure equipment. Section 4: Electrodes and fluxes for submerged arc welding Obsolete
NB/T 47018.4-2011English359 Add to Cart 3 days Technical permission of welding materials for pressure equipment. Section 4: Electrodes and fluxes for submerged arc welding Obsolete
BUY with any currencies (Euro, JPY, GBP, KRW etc.): NB/T 47018.4-2022     Related standards: NB/T 47018.4-2022

PDF Preview: NB/T 47018.4-2022


PDF Preview: NB/T 47018.4-2017


NB/T 47018.4-2022: PDF in English (NBT 47018.4-2022)

NB/T 47018.4-2022 NB ENERGY INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.160.10 CCS J 33 Replacing NB/T 47018.4-2017 Specification of Welding Materials for Pressure Equipment - Section 4: Electrodes and Fluxes for Submerged Arc Welding ISSUED ON: NOVEMBER 4, 2022 IMPLEMENTED ON: DECEMBER 31, 2022 Issued by: National Energy Administration Table of Contents Foreword ... 3 1 Scope ... 6 2 Normative References ... 6 3 Technical Requirements ... 7 4 Test Methods ... 12 5 Product Identification ... 14 Appendix A (Informative) Comparison between Classification of Solid Electrode/Flux Combination for Submerged Arc Welding and Flux Models in the 2017 Edition ... 15 Foreword This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for Standardization – Part 1: Rules for the Structure and Drafting of Standardizing Documents. This Document is Part 4 of NB/T 47018 Technical Permission of Welding Materials for Pressure Equipment. NB/T 47018 consists of the following parts: --- Part 1: General Rules of Procurement; --- Part 2: Electrodes for Steel; --- Part 3: Steel Electrodes and Rods for Gas Shielded Arc Welding; --- Part 4: Electrodes and Fluxes for Submerged Arc Welding; --- Part 5: Stainless-Steel Strip Electrodes and Fluxes for Overlay Welding; --- Part 6: Aluminum and Aluminum Alloy Welding Wires and Filler Wires; --- Part 7: Titanium and Titanium Alloy Welding Wires and Filler Wires; This Document replaced NB/T 47018.4-2017 Technical Permission of Welding Materials for Pressure Equipment - Section 4: Electrodes and Fluxes for Submerged Arc Welding. Compared with NB/T 47018.4-2017, the major technical changes of this Document are as follows besides structural adjustments and editorial modifications: a) In the normative references, the original GB/T 5293 Carbon Steel Electrodes and Fluxes for Submerged Arc Welding was renamed as Solid Wire Electrodes, Tubular Cored Electrodes and Electrode/Flux Combinations for Submerged Arc Welding of Non-Alloy And Fine Grain Steels; the original GB/T 12470 Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding was renamed as Solid Wire Electrodes, Tubular Cored Electrodes and Electrode/Flux Combinations for Submerged Arc Welding of Creep- Resisting Steels; the original GB/T 17854 Stainless Steel Electrodes and Fluxes for Submerged Arc Welding was renamed as Solid Wire Electrodes/Flux Combinations for Submerged Arc Welding of Stainless Steels; and two standards, GB/T 36034 Solid Wire Electrodes, Tubular Cored Electrodes and Electrode/Flux Combinations for Submerged Arc Welding of High Strength Steels and GB/T 36037 Fluxes for Submerged Arc Welding and Electroslag Welding were added (see the Clause 2 of this Edition); b) Change the contents of the quality certificate [see b) in 3.1.2 of this Edition; b) in 3.1.2 of the 2017 Edition]; c) Change the specific provisions on the interchangeability of flux batch numbers and electrode batch numbers in the welding material quality certificate (see 3.1.3, 3.1.4 of this Edition; 3.1.3 of the 2017 Edition); Specification of Welding Materials for Pressure Equipment - Section 4: Electrodes and Fluxes for Submerged Arc Welding 1 Scope This Document specifies the technical requirements, test methods and product identification of submerged arc welding steel electrodes, fluxes and electrode-flux combinations. This Document is applicable to non-alloy steel and fine-grained steel solid electrodes and electrode-flux combinations for submerged arc welding, heat-resistant steel solid electrodes and electrode-flux combinations, high-strength steel solid electrodes and electrode-flux combinations, and stainless-steel solid electrodes and electrode-flux combinations of pressure equipment. 2 Normative References The provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. GB/T 2653 Bend test methods on welded joints GB/T 3965 Methods for determination of diffusible hydrogen in deposited metal GB/T 5293 Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non-alloy and fine grain steels GB/T 12470 Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels GB/T 17854 Solid wire electrodes/flux combinations for submerged arc welding of stainless steels GB/T 29713 Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels GB/T 36034 Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of high strength steels GB/T 36037 Fluxes for submerged arc welding and electroslag welding NB/T 47013.2 Nondestructive testing of pressure equipment - Part 2: Radiographic testing NB/T 47013.11 Nondestructive testing of pressure equipment – Part 11: X-ray computed radiographic testing NB/T 47014 Welding procedure qualification for pressure equipment NB/T 47018.1 Technical permission of welding materials for pressure equipment - Part 1: General rule 3 Technical Requirements 3.1 General provisions 3.1.1 In addition to complying with the provisions of GB/T 5293, GB/T 12470, GB/T 17854, GB/T 36034, GB/T 36037, GB/T29713, the steel electrodes and fluxes for submerged arc welding of non-alloy steel and fine-grained steel, heat-resistant steel, high-strength steel and stainless steel for pressure equipment shall also comply with the provisions of NB/T 47018.I and this Document. 3.1.2 The quality certificate of submerged arc welding materials for pressure equipment shall include the following contents: a) The batch number of the flux and the batch number of the combined electrode, as well as the inspection results of the electrode, flux and the deposited metal after the welding of the combination; b) The impurity elements S and P contents of the flux for non-alloy steel, fine-grained steel, heat-resistant steel, high strength steel and stainless steel, and the metallurgical property code shall be indicated. 3.1.3 For heat-resistant steel with standard tensile strength of deposited metal no less than 620 MPa, fine-grained steel with standard impact test temperature lower than -70°C, high-strength steel welding materials with standard impact test temperature lower than -20°C, or at the request of the purchaser, the batch number of electrode and flux for submerged arc welding shall be the same as the content of the quality certificate in accordance with 3.1.2. In addition, the batch number of the same type of electrode and flux supplied by the same welding material manufacturer can be interchangeable and shall be indicated in the quality certificate. 3.1.4 When the batch number of electrode and/or flux is different from the content of the quality guarantee and does not meet the requirements of 3.1.3, the ordering organization shall conduct inspection according to the provisions of the quality guarantee system; and the technical requirements shall be no lower than those of this Document. Only after passing the inspection, ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.