JR/T 0025.8-2013 (JR/T 0025.8-2018 Newer Version) PDF English
Search result: JR/T 0025.8-2013 (JR/T 0025.8-2018 Newer Version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| JR/T 0025.8-2018 | English | 2009 |
Add to Cart
|
11 days
|
China financial integrated circuit card specifications - Part 8: Contactless specification independent of application
| Valid |
| JR/T 0025.8-2013 | English | 2020 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
China financial integrated circuit card specifications. Part 8: Contactless specification independent of application
| Obsolete |
| JR/T 0025.8-2010 | English | RFQ |
ASK
|
14 days
|
China financial integrated circuit card specifications. Part 8: Contactless specification independent of application
| Obsolete |
| JR/T 0025.8-2005 | English | RFQ |
ASK
|
14 days
|
China financial integrated circuit card specifications - Part 8: Contactless specification independent of application
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): JR/T 0025.8-2013 Newer/related standards: JR/T 0025.8-2018
PDF Preview: JR/T 0025.8-2013
JR/T 0025.8-2013: PDF in English (JRT 0025.8-2013) JR/T 0025.8-2013
JR
FINANCIAL INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 35.240.40
A 11
Filing No..
Replacing JR/T 0025.8-2010
China financial integrated circuit card specifications - Part 8.
Contactless specification independent of application
(ISO 14443.2001, Identification cards - Contactless
integrated circuit(s) cards - Proximity cards, Part 1~4, NEQ)
ISSUED ON. FEBRUARY 5, 2013
IMPLEMENTED ON. FEBRUARY 5, 2013
Issued by. The People’s Bank of China
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 6
2 Normative references ... 7
3 Terms and definitions ... 8
4 Symbols and abbreviated terms ... 10
5 Physical characteristics ... 13
6 Radio frequency power and signal interface... 15
7 Initialization and anticollision ... 24
8 Transmission protocol ... 63
9 Data element and command ... 85
Annex A (Informative) Standard compatibility and surface quality ... 90
Annex B (Informative) Communication example Type A ... 91
Annex C (Normative) CRC_A and CRC_B encoding ... 93
Annex D (Informative) Type A timeslot - Initialization and anticollision ... 99
Annex E (Informative) Example of Type B anticollision sequence ... 103
Annex F (Informative) Multi-Activation example ... 105
Annex G (Informative) Protocol scenarios ... 106
Annex H (Informative) Block and frame coding overview ... 115
Annex I (Normative) Security message ... 117
Reference ... 122
Foreword
JR/T 0025 China financial integrated circuit card specifications is divided into
the following parts.
— Part 1. Electronic purse / electronic deposit application card specification
(abolished);
— Part 2. Electronic purse / electronic deposit application specification
(abolished);
— Part 3. Specification on application independent ICC to terminal interface
requirements;
— Part 4. Debit / Credit application overview;
— Part 5. Debit / Credit application card specification;
— Part 6. Debit / Credit application terminal specification;
— Part 7. Debit / Credit application security specification;
— Part 8. Contactless specification independent of application;
— Part 9. Electronic purse extended application guide;
— Part 10. Debit / Credit card personalization guide;
— Part 11. Contactless integrated circuit card communication specification;
— Part 12. Contactless integrated circuit card payment specification;
— Part 13. Low-value payment specifications based on debit / credit
application;
— Part 14. Comprehensive application specification based on contactless
low-value payment application;
— Part 15. Electronic cash dual-currency payment specification;
— Part 16. IC card internet terminal specification;
— Part 17. Enhanced debit / credit application security specification.
This Part is Part 8 of JR/T 0025.
This Part was drafted in accordance with the provisions given in GB/T 1.1-2009.
China financial integrated circuit card specifications - Part 8.
Contactless specification independent of application
1 Scope
This Part of JR/T 0025 mainly includes the following contents.
— Physical characteristics. SPECIFY the physical characteristics of
proximity cards (PICCs). This part is identical with the contents of
ISO/IEC 14443-1.
— Radio frequency power and signal interface. SPECIFY the properties and
characteristics of the fields to be provided for power and bidirectional
communication between proximity coupling devices (PCDs) and
proximity cards (PICCs). This Part does not specify the means of
generating coupling fields, nor the means of compliance with
electromagnetic radiation and human exposure safety regulations. This
part is identical with the contents of ISO/IEC 14443-2.
— Initialization and anticollision. DESCRIBE the polling for proximity cards
(PICCs) entering the field of a proximity coupling device (PCD); the byte
format, the frames and timing used during the initial phase of
communication between PCDs and PICCs; the initial Request (REQ) and
Answer to Request (ATQ) command content; methods to detect and
communicate with one PICC among several PICCs (anticollision); other
parameters required to initialize communications between a PICC and
PCD; and optional means to ease and speed up the selection of one
PICC among several PICCs (the one that needs to be dealt with most)
based on application criteria. This part is identical with the contents of
ISO/IEC 14443-3.
— Transmission protocol. SPECIFY a half-duplex block transmission
protocol featuring the special needs of a contactless environment.
DEFINE the activation and deactivation sequence of the protocol. This
part is applicable to proximity cards (PICCs) of Type A and Type B. This
part is identical with the contents of ISO/IEC 14443-4.
— Data elements and command sets. DEFINE general data elements and
command sets used in deactivating and activating contactless channels
in financial applications, and basic requirements for terminal response.
This Part is applicable to the contactless financial IC cards issued or accepted
by the banks. Such cards are mainly used in the departments (authorities)
related to the card design, manufacturing, management, issuing and
acceptance as well as the development, integration and maintenance of the
application systems associated with the contactless financial IC card
applications.
2 Normative references
The following documents are essential to the application of this document. For
dated references, only the editions with the dates indicated are applicable to
this document. For undated references, only the latest editions (including all the
amendments) are applicable to this document.
GB/T 7496 Information processing systems - Data communication - High-
level data link control procedures - Frame structure (GB/T 7496-1987,
ISO/IEC 3309.1984, IDT)
GB/T 14916 Identification cards - Physical characteristics (GB/T 14916-2006,
ISO/IEC 7810.2003, IDT)
GB/T 16649.2 Identification cards - Integrated circuit(s) cards with contacts -
Part 2. Dimensions and location of the contacts (GB/T 16649.2-2006,
ISO/IEC 7816-2.1999, IDT)
GB/T 16649.3 Identification cards - Integrated circuit(s) cards with contacts -
Part 3. Electronic signals and transmission protocols (GB/T 16649.3-2006,
ISO/IEC 7816-3.1997, IDT)
GB/T 16649.4 Identification cards - Integrated circuit(s) cards with contacts -
Part 4. Organizations, security and commands for interchange (GB/T
16649.4-2010, ISO/IEC 7816-4.2005, IDT)
GB/T 16649.5 Identification cards - Integrated circuit(s) cards with contacts -
Part 5. National numbering system and registration procedure for application
identifiers (GB/T 16649.5-2002, ISO/IEC 7816-5.1994, NEQ)
GB/T 16649.6 Identification cards - Integrated circuit(s) cards with contacts -
Part 6. Interindustry data elements (GB/T 16649.6)-2001, ISO/IEC 7816-
6.1996, IDT)
GB/T 17554.1 Identification cards - Test methods - Part 1. General
characteristics tests (GB/T 17554.1-2006, ISO/IEC 10373-1.1998, MOD)
JR/T 0025.7 China financial integrated circuit card specifications - Part 7.
Debit / Credit application security specification
JR/T 0025.17 China financial integrated circuit card specifications - Part 17.
Enhanced debit / credit application security specification
ISO/IEC 13239 Information technology - Telecommunications and
information exchange between systems - High-level data link control (HDLC)
procedures
ISO/IEC 14443.1~14443.4 Identification cards - Contactless integrated
circuit cards - Proximity cards
CCITT X.25 Data network packet-switched communication protocol
CCITT V.42 Data set criteria
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 Integrated circuit (IC)
Electronic component designed to perform processing and / or memory
functions.
3.2 Contactless
Achievement of signal exchange with, and supply of power to, the card without
the use of galvanic elements [it is also the absence of an ohmic path from the
external interfacing equipment to the integrated circuit(s) contained within the
card].
3.3 Contactless integrated circuit(s) card
ID-1 card (as specified in GB/T 14916) into which integrated circuit has been
placed, such that communication to such integrated circuit is done in a
contactless manner.
3.4 Proximity card (PICC)
ID-1 card into which integrated circuit and coupling circuit have been placed,
such that communication to such integrated circuit is done by inductive coupling
of the proximity coupling device.
3.5 Proximity co...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|