HJ 569-2010 PDF English
Search result: HJ 569-2010 English: PDF
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| HJ 569-2010 | English | 110 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Technical requirement for environmental labeling products - Cases and bags
| Valid |
PDF Preview: HJ 569-2010
HJ 569-2010: PDF in English HJ 569-2010
HJ
NATIONAL ENVIRONMENTAL PROTECTION STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Technical requirement for
environmental labeling products - Cases and bags
ISSUED ON. MAY 4, 2010
IMPLEMENTED ON. JULY 1, 2010
Issued by. Ministry of Environmental Protection
Ministry of Environmental Protection of P.R.C
ANNOUNCEMENT
2010 No.41
For the purpose of implementing the "People's Republic of China
Environmental Protection Law", protecting the environment and promoting
technological progress, "Technical requirement for environmental labeling
products - Cases and bags" and other five standards are approved and
published as national environmental standards. The names and numbers of
standards are as follows.
1. “Technical requirement for environmental labeling products - Cases and
bags” (HJ 569-2010)
2. “Technical requirement for environmental labeling products - Toner
cartridge” (HJ 570-2010)
3. “Technical requirement for environmental labeling products - Wood
based panels and finishing products” (HJ 571-2010)
4. “Technical requirement for environmental labeling products - Stationery”
(HJ 572-2010)
5. “Technical requirement for environmental labeling products - Ink-jet
cartridge” (HJ 573-2010)
Announcement is hereby given that the standards mentioned above shall be
implemented since July 1, 2010, and published by the China Environmental
Science Press. The content can be found at the website of the Ministry of
Environmental Protection (bz.mep.gov.cn).
Hereby it is announced.
May 4, 2010
Table of Contents
Foreword ... 4
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Basic requirements ... 6
5 Technical contents ... 6
6 Inspection methods ... 7
Appendix A ... 9
Foreword
This Standard is formulated for implementing the "People's Republic of China
Environmental Protection Law", reducing the impact of cases and bags in the
production and use on the environment and human health.
This Standard puts forward the requirements for cases and bags (harmful
substance limits in fabrics, metal parts in contact with human skin, smell grade),
production process, prohibited substances in package, storage and
transportation of cases and bags.
This Standard applies to Chinese environmental labeling product certification.
This Standard was organized and developed by Department of Science and
Technology Standard of the Ministry of Environmental Protection.
Main drafting organizations of this Standard. Environmental Development
Center of the Ministry of Environmental Protection, China Leather and Footwear
Industry Research Institute, Shenzhen Academy of Metrology and Quality
Inspection, Newcomer Group Co Ltd., DAPAI (China) Co., Ltd., Guangzhou
Shiling Leather Industry Research Center Co., Ltd., Guangzhou V-goal Hand
Bag Co., Ltd., Guangzhou Huadu Dr. En Leather Design Institute, Guangzhou
Huishun Exhibition Handbags Co., Ltd., Guangzhou Aowangda Leather
Product Co., Ltd., and Guangzhou Daxiwang Zipper Industries Limited.
This Standard was approved by the Ministry of Environmental Protection on
May 4, 2010.
This Standard shall be implemented since July 1, 2010. This Standard shall be
interpreted by the Ministry of Environmental Protection.
Technical requirement for
environmental labeling products - Cases and bags
1 Scope
This Standard specifies the terms and definitions, basic requirements, technical
contents, and inspection methods of environmental labeling products - cases
and bags. This Standard applies to cases and bags that are made of textile
fabric, leather and PU synthetic leather.
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For undated references,
the effective version applies to this Standard.
GB 6675-2003 National safety technical code for toys
GB 21550-2008 The restriction of hazardous materials in polyvinyl chloride
artificial leather
GB/T 22866-2008 Leather hardware accessory - Determination of release of
nickel
GB/T 22931-2008 Leather and fur - Chemical tests - Determination of
plasticizers
HJ 507-2009 Technical requirement for environmental labeling products
Leather and synthetic leather
HJ/T 220 Technical requirement for environmental labeling products -
Adhesives
HJ/T 307 Technical Requirement for Environmental Labeling Products -
Ecotypic Textile
3 Terms and definitions
The following terms and definitions apply to this Standard.
6.5 Inspection of 5.1.2 of technical contents shall be conducted in the method
stipulated in GB/T 22866-2008.
6.6 Inspection of 5.1.3 of technical contents shall be conducted in the method
stipulated in Appendix of HJ 507-2009. Sample preparation shall be conducted
in the following steps. After the sample is unsealed, immediately extract (150±5)
cm3 of fabric sample, of which the size shall be converted according to sample
thickness. For example, for the sample of which the thickness is 1.0 mm, its
size shall be about 39 cm × 39 cm.
Coated fabric shall be tested as a whole.
6.7 Inspection of adhesive in 5.2.2 of technical contents shall be conducted in
the method stipulated in HJ/T 220.
6.8 Inspection of transportable heavy metal limits in ink in 5.2.3 of technical
contents shall be conducted in the method stipulated in Appendix C of GB 6675-
2003.
6.9 Other indicators of technical contents shall be verified by document review
and inspection on the spot.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|