GB/T 9766.2-2016 PDF in English
GB/T 9766.2-2016 (GB/T9766.2-2016, GBT 9766.2-2016, GBT9766.2-2016)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 9766.2-2016 | English | 100 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Test method for tyre valves -- Part 2: Rubber base valves test methods
| Valid |
| GB/T 9766.2-2008 | English | 279 |
Add to Cart
|
3 days
|
Test method for tyre valve -- Part 2: Rubber base valves test methods
| Obsolete |
Standards related to (historical): GB/T 9766.2-2016
PDF Preview
GB/T 9766.2-2016: PDF in English (GBT 9766.2-2016) GB/T 9766.2-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.160.01
G 41
Replacing GB/T 9766.2-2008
Test Method for Tyre Valves -
Part 2: Rubber Base Valves Test Methods
ISSUED ON: FEBRUARY 24, 2016
IMPLEMENTED ON: JANUARY 1, 2017
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 5
4 Test Equipment, Instruments and Apparatuses ... 5
5 Sealing Performance Test ... 6
6 Adhesion Strength Test of Rubber to Metal ... 7
7 Determination of Adhesion Rate ... 10
8 Measurement of Edge Thickness of Rubber Seat ... 10
Foreword
GB/T 9766 Test Method for Tyre Valves is divided into seven parts:
---Part 1: Test Method for Tube Clamp-in Valves;
---Part 2: Rubber Base Valves Test Methods;
---Part 3: Test Methods for Snap-in Valves;
---Part 4: Test Methods for Tubeless Clamp-in Valves;
---Part 5: Test Methods for Large Core Chamber Tyre Valves;
---Part 6: Test Method for Core;
---Part 7: Test Methods for Components.
This is Part 2 of GB/T 9766.
This Part was drafted in accordance with the rules provided in GB/T 1.1-2009.
This Part serves as a replacement of GB/T 9766.2-2008 Test Method for Tyre Valves - Part 2:
Rubber Base Valves Test Methods. In comparison with GB/T 9766.2-2008, the main technical
changes are as follows:
---The accuracy grade of the pressure gauge is modified (see 4.3; 4.3 of Version 2008);
---The sealing performance test of Type AA05C ~ AA09C and Type DB04C ~ DB06C
valves is added (see Chapter 5);
---The adhesion strength test of rubber to metal of Type AA05C ~ AA09C and DB04C ~
DB06C valves is added (see 6.1.2);
---Figure 5 and Figure 6 are added (see 6.2);
---The test procedures of the adhesion strength test of rubber to metal of Type CG01 ~
CG06, DG04 ~ DG09, CG08 ~ CG13, DG10 ~ DG15, CG01C ~ CG12C, DG01C ~
DG11C, EG01C ~ EG08C, CG07, DG03, DG12C, CJ06 and ZG01 valves are modified
(see 6.2.1; 6.2.1 of Version 2008).
This Part was proposed by China Petroleum and Chemical Industry Federation.
This Part shall be under the jurisdiction of National Technical Committee 19 on Tyres and Rims
of Standardization Administration of China (SAC/TC 19).
The main drafting organizations of this Part: Jiangyin Chuangxin Valve Co., Ltd.; Xiamen
Xiahui Rubber Metal Industry Co., Ltd.
The participating drafting organizations of this Part: Jiangyin Tianyi Valve Core Co., Ltd.;
Shandong Gaotian Metal Manufacturing Co., Ltd.; Dongying Yutong Valve Co., Ltd.; Foshan
Shunde Anchi Industrial Co., Ltd.; National Rubber Machinery Quality Supervision and
Inspection Center.
The main drafters of this Part: Lu Xiaoyong, Nie Yangyang, Tang Jianlan, Li Feng, Wu Rongzhi,
Li Zhangang, Mengyi.
The issuing of the previous versions:
---GB 9766-1988, GB/T 9766-1994, GB/T 9766-2002, GB/T 9766.2-2008.
Test Method for Tyre Valves - Part 2: Rubber Base Valves
Test Methods
1 Scope
This Part of GB/T 9766 specifies the terms and definitions, test equipment, instruments and
apparatuses of the rubber base valves (hereinafter referred to as “valves”) test, as well as sealing
performance test, adhesion strength test of rubber to metal, determination of adhesion rate and
measurement of edge thickness of rubber seat.
This Part is applicable to the valve test of inner tubes of industrial vehicles, agricultural vehicles,
construction machinery, motorcycles, electric vehicles and rickshaws, etc.
This Part is not applicable to the test of aviation tyre valves.
2 Normative References
The following documents are indispensable to the application of this document. In terms of
references with a specified date, only versions with a specified date are applicable to this
document. In terms of references without a specified date, the latest version (including all the
modifications) is applicable to this document.
GB/T 1796.2 Tyre Valves - Part 2: Rubber Base Valves
GB 1796.6 Tyre Valves - Part 6: Cores
GB/T 9766.6 Test Method for Tyre Valve - Part 6: Test Method for Core
GB/T 12839 Terms and Definitions of Tyre Valves
3 Terms and Definitions
The terms and definitions defined in GB/T 12839 are applicable to this document.
4 Test Equipment, Instruments and Apparatuses
4.1 Tensile testing machine: with a load of 0 N ~ 2,000 N and the relative change of the
indicating value of 1%.
4.2 High-temperature test chamber: the temperature in the chamber can reach above 200 C and
the temperature fluctuation is 2 C.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|